AirLive WL-1100AP Setup guide

How to Setup Bridge Function

All AirLive WL-1100AP is capable of performing Bridge function. Bridge is used to link two or more LANs together

wirelessly. Once the AP is in bridge mode, the AP's access point function is ceased. That means no wireless cards can

connect to AP anymore.

To connect 2 bridges together, we should use point to point connection. To connect 3 or more bridges together, we need 1 AP

to act as the multipoint center. Please follow the instruction below:

Connect 2 Bridges Together (Point to Point):

Environment:

Computer A & Bridge B are in building 1. Computer D & Bridge C are in building 2.

Procedure:

1. On computer A, open the SNMP utility. Get into the Bridge B. Select Administrator and enter "public" as

password. From the menu Setup->Wireless LAN->Operational Setting->Advance: check "Bridge, Point to Point

function." Enter Bridge C's MAC address in the "remote bridge MAC address" field.

2. On computer D, open the SNMP utility. Get into the Bridge C. Check Setup->Wireless LAN->Operational

Setting->Advance: Bridge, Point to Point function. Enter Bridge Bs MAC address in the "remote bridge MAC

address" field.

3. Both bridges must use the same channel and ESSID

4. Bridges and computers on both side of the building must be in the same subnet.

*Note: If you don't see the "Advance" option in the "Operational Setting" menu, please click here to download the Bridge Utility.

Please remember that it's better for two bridges to be on the same floor, facing each other through the windows so the signal is

strong enough for stable transmission.

Connecting 3 or more Bridges together (multipoint):

Environment:

Computer A & Bridge B are in building 1. Bridge E in Building 2. Computer D & Bridge C are in building 3.

Procedure:

1. On computer A, open the SNMP utility. Get into the Bridge B. Select Administrator and enter "public" as

password. From the menu Setup->Wireless LAN->Operational Setting->Advance: check "Bridge, Point to Point

function." Enter Bridge E's MAC address in the "remote bridge MAC address" field.

2. Connect a computer to Bridge E. Open the SNMP utility. Get into the Bridge E. Select Administrator and enter

"public" as password. From the menu Setup->Wireless LAN->Operational Setting->Advance: check "Bridge, Point to

MultiPoint function."

3. On computer D, open the SNMP utility. Get into the Bridge C. Check Setup->Wireless LAN->Operational

Setting->Advance: Bridge, Point to Point function. Enter Bridge E's MAC address in the "remote bridge MAC

address" field.

4. All bridges must use the same channel and ESSID

5. All bridges and computers on must be in the same subnet.

*Note: If you don't see the "Advance" option in the "Operational Setting" menu, please click here to download the Bridge Utility.

Please remember that it's better for all bridges to be on the same floor, facing each other through the windows so the signal is

strong enough for stable transmission.

Table of contents

Other AirLive Wireless Access Point manuals

AirLive

AirLive WH-9200AP User manual

AirLive

AirLive WL-5460AP v2 User manual

AirLive

AirLive WLA-5000AP User manual

AirLive

AirLive G.DUO User manual

AirLive

AirLive WL-5480PAP User manual

AirLive

AirLive N.Plug User manual

AirLive

AirLive WMM-3000AP User manual

AirLive

AirLive Air Live WL-5470AP User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive TOP-12AC Installation and operation manual

AirLive

AirLive WMU-6000FS User manual

AirLive

AirLive WHA-5500CPE User manual

AirLive

AirLive AirMax5X II User manual

AirLive

AirLive WLA-5200AP User manual

AirLive

AirLive N.TOP User manual

AirLive

AirLive AirMax5N/ESD User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive WHB-5854A User manual

AirLive

AirLive AC.TOP User manual

AirLive

AirLive AC-1200R User manual

AirLive

AirLive WLA-5000APv2 User manual

AirLive

AirLive WL-5470POE User manual

AirLive

AirLive wl-5460apv2 User manual

AirLive

AirLive AC-1200UR User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide