AirLive BT-120AR User manual
QuickSetupGuide
Bluetooth Stereo Recive
r
BT-120AR
English ●●●
Español ●●●
Русский ●●●
Português ●●●
Deutsch ●●●
한국어 ●●●
日本語 ●●●49
33
41
17
25
1
9
1
1
OvisLink Cor
p
. B
T
-
120
A
REnglish
Package contents
Charge the battery
The battery lasts eight hours and is recharged using the power adapter or
the USB cable. To recharge:
Plug the USB cable into the DC jack on the BT-120AR and connect the
other end to your PC.
Plug the power adapter into the DC jack on the BT-120AR and connect
the other end to an electrical outlet.
English
2
2
OvisLink Cor
p
. B
T
-
120
A
REnglish
Turn on the power
To turn on the power, press and hold the power button (about 3 seconds)
until the power LED lights blue.
To turn off the power, press and hold the power button (about 3 seconds)
until the power LED turns off.
Battery low LED Volume +/- Reset button
Note: Please charge the battery fully for ten hours at the first time.
Thereafter, recharging takes 90 minutes only.
Blue LED
Power is on
Blue flashing LED
Connected to device
Red LED
Battery is charging, turns off when
charged
Red flashing LED
Battery is low, recharge before LED
turns off
English
3
3
OvisLink Cor
p
. B
T
-
120
A
REnglish
You can pair the BT-120AR with an Audio Dongle (BT-120AD or
BT-120ADS) attached to your computer.
1. Plug the Audio Dongle into a USB port on your computer and
ensure Bluetooth is running on the computer.
2. Power on your BT120AR.
Pair with A/V Transmitter
The BT-120AR can be used with a Bluetooth A/V Transmitter or Bluetooth
Audio Dongle. On first use, the devices must be paired.
To pair the devices.
1. Connect your BT-120AR to an audio headset.
2. Connect your Transmitter to an audio device and power on it.
3. Power on the BT-120AR.
English
4
4
OvisLink Cor
p
. B
T
-
120
A
REnglish
Using with your mobile phone
Wait for devices to connect
The devices connect (pair) after 90
seconds.
The blue power/link LEDs on both
BT-120AR and transmitter flash when
connected.
To pair with your phone
1. Enable Bluetooth on your phone
(refer to the phone’s user
manual).
2. Turn on the BT-120AR. Check
that no other device connects with
the headset by confirming that the
power/link LED is not flashing.
3. In the phone’s Bluetooth menu,
search for devices.
4. Select Stereo Reciver.
5. Enter the PIN code “0000”.
Answering calls
To answer a call, push the Play button.
To end a call, push the Power button.
The BT-120AR can be used with a Bluetooth-enabled mobile phone.
English
5
5
OvisLink Cor
p
. B
T
-
120
A
REnglish
Using the AV Profile to play audio
1. Double-click the BlueSoleil icon in the task tray.
2. Press F5 to search for Bluetooth devices.
3. Double click the Stereo Reciver icon.
4. Click Bluetooth AV Service to create a connection shortcut.
Using the Headset Profile to play Skype™
1. Double-click the BlueSoleil icon in the task tray.
2. Press F5 to search for Bluetooth devices.
3. Double click the Stereo Reciver icon.
4. Click Bluetooth Headset Service to create a connection shortcut.
Using IVT BlueSoleil
™
To use the IVT BlueSoleil, first you must pair the BT-120AR with your
computer.
1. Ensure Bluetooth is running on your computer.
2. Power on your BT-120AR.
Note: The IVT BlueSoleil software is not included with your Bluetooth
Headset.
Using profiles
English
6
6
OvisLink Cor
p
. B
T
-
120
A
REnglish
Configuring BTAUDIO audio output
1. Open Control Panel and double-
click Sound and Audio devices.
2. Select the Audio tab.
3. Under Sound playback, change
the device to BTAUDIO.
4. Under Sound recording, change
the device to BTAUDIO.
5. Click OK.
Using WidComm® Bluetooth software
To use the WidComm Bluetooth software, first you must pair the BT-120AR
with your computer.
1. Ensure Bluetooth is running on your computer.
2. Power on your BT-120AR.
Using the AV Profile to play audio
1. Double-click the WidComm icon in the task tray.
2. Click Search for devices in range.
3. Double-click the Stereo Reciver icon.
4. Click Audio Sink on Stereo Reciver to create a connection
shortcut.
Note: The WidComm Bluetooth software is not included with your
Bluetooth Headset.
English
7
7
OvisLink Cor
p
. B
T
-
120
A
REnglish
Configuring Widcomm audio output
1. Open Control Panel and double-
click Sound and Audio devices.
2. Select the Audio tab.
3. Under Sound playback, change the
device to Bluetooth High Quality
Audio.
4. Under Sound recording, change
the device to Bluetooth High Qual-
ity Audio.
5. Click OK.
Copyright
The BlueSoleil, Skype, Widcomm are trademarks owned by their
respective owners.
English
8
8
OvisLink Cor
p
. B
T
-
120
A
REnglish
Troubleshooting
If the Bluetooth Reciver does not work, try
the following:
- Ensure connecting devices are
charged
- Turn off all devices and then turn
them on in the order shown in this
guide
- Ensure devices are within the
10-meter range
specification
Standards Bluetooth specification V1.2 compliant
Bluetooth A2DP profile (AV Profile)
Bluetooth AVRCP profile
Headset and Hand free profile
Frequency Band 2402 ~ 2480 MHz
Tx Power 0.25 ~ 2.5mW
(Bluetooth Power Class II)
Rx Sensitivity < -80dBm (BER 0.1%)
Distance > 10m (open space)
Audio Streaming Format SBC 48.000 kHz
Audio Frequency Range 20Hz ~ 22 kHz
Audio S/N > 85dB
Audio THD < -83dB
Audio Output Power > 20mWrms
Power supply Rechargeable battery
Physical Specification: Dimension:
65.5 mm x 35 mm x 22.5 mm
English
9
9
OvisLink Cor
p
. B
T
-
120AR Español
Contenido del Paquete
Cargue la Batería
La carga de la batería dura ocho horas en operación y puede ser recargada
por medio del adaptador de corriente o el cable USB. Para recargar:
Enchufe el Cable USB en el conector de entrada DC del BT-120AR y conecte
el otro extremo a tu PC.
Enchufe el adaptador de corriente en la entrada DC del BT-120AR y
conecte el otro extremo a una toma de corriente.
Español
Table of contents
Languages:
Other AirLive Receiver manuals
