AFA AF1RH33229TECOMBO User manual
33" STAINLESS STEEL KITCHEN SINK & FAUCET KIT
AF1RH33229TECOMBO
·16" × 14" Dual Bowl Sink
·Extra deep 9 inch Bowl
·Top or Under Mount
·18 Gauge Solid Stainless
·Cast Stainless Pull Down Faucet
·Stainless Steel Soap / Lotion Dispenser
·2 Stainless Drains w / Strainers
·17" × 18-1/2" Stainless Roller Mat
Owners Manual
AFA USA LLC
3190 Airport Loop Dr Ste B1, Costa Mesa, CA 92626
Toll Free: (877) 778-6888 English Speaking Only
Monday-Friday 9 a.m-5 p.m Pacific Time Zone
Email: customer.service@afastainless.com
Français P.18
Español P.35
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product. Before beginning the assembly of
this product, compare the parts with the package contents and list. If any
part is missing or damaged do not attempt to assemble the product and
contact AFA Stainless customer service for assistance.
WARNING
• Follow the installation instructions carefully. Proper installation is the
installer’s responsibility.
CAUTION
• Check local building codes before beginning installation to ensure
compliance.
• These instructions are based on application of composite material or solid
surface countertop installation only. Countertop applications of stone,
granite, marble or butcher block should be referred to an experienced
countertop fabricator for custom installation.
• AFA stainless does not accept any liability for damage to countertop; sink
fixture, faucet, or personal injury during installation. Warranty may be void if
it is determined installation instructions were not followed.
AF1RH33229TECOMBO
Owners Manual
2
AFA STAINLESS PRODUCT SUPPORT TEAM
Customer service hotline
Toll Free: (877) 778-6888 English Speaking Only
Monday-Friday 9 a.m-5 p.m Pacific Time Zone
Email: customer.service@afastainless.com
AFA USA LLC
3190 Airport Loop Dr Ste B1, Costa Mesa, CA 92626
This unit meets or exceeds the following:
• ASME A112.18.1/CSA B125.1
• California Title 20 Water-Efficiency Standards
• Listed by CUPC for use in the US and Canada
• Listed by California Energy Commission
Flow rate Kitchen faucet max. 1.8GPM(6.8L/M)-MAX ASME A112.18.1/ CSA B125.1
A-6 A-7
A-8
x2
x12
x12
E-1
E-2
F-1
F-2
F-3
F-4
F-5
PARTS LIST
x12
x12
x12
x12
x12
D-1
D-2
D-3
D-4
D-5
A-2
A-3
A-4
A-5
A-9
B-1
B-2
C-4
C-1 C-3
C-5
C-6
x 2
C-2
B-3
A-1
3
Faucet
A-1 Faucet Body
A-2 Deck Plate
A-3 Horseshoe Gasket
A-4 Hex M19 Nut
A-5 Hose Protector
A-6 Hot & Cold Supply Line
A-7 Weight With 2 screws
A-8 Installation Tool
A-9 Spray Hose
Sink
B-1 Sink
B-2 Soap/Lotion Hole Cover
B-3 Installation Template
Soap Dispenser
C-1 Spout & Pump
C-2 Tube
C-3 Bottle
C-4 Threaded Shank
C-5 Rubber Gasket
C-6 Lock Nut
Strainer
D-1 Strainer Basket Assembly
D-2 Strainer Bowl
D-3 Top Gasket
D-4 Bottom Gasket
D-5 Lock Nut
Top-mount Installation Clips
E-1 Screw 2"
E-2 Clip
Under-mount Installation Clips
F-1 Drop-In Anchor
F-2 Mounting Clip
F-3 Metal Washer
F-4 Wing Nut 1/4"-20
F-5 Screw
Dimensions
4
Recommended Tools for Installation:
Electric Jig Saw Adjustable Wrench
T-5 T-6 T-7 T-8
Foam Adhesive
Pencil
T-1 (Included) T-2(Included) T-3 T-4
Important Information
·Before and during installation, please read and familiarize yourself with all installation instructions for this
product.
·Please keep all components, parts and accessories of this product away from small children and minors.
During installation, all screws, tools and small parts should be supervised so that they do not fall into the
hands of children.
·Use caution at all times when installing this product. Please ensure that you are physically able to perform all
parts of the installation and that you have the correct tools and equipment needed. Before beginning,
remove all wrappers and packing materials including staples and packing straps.
·Please check to ensure that all components and parts are complete.
·For top-mount installations: For ease of installation we recommend installing the faucet and soap dispenser
to the sink prior to installation of the sink.
1/2" Drill Bit
Silicone Sealant
Electric Drill
T-9 T-10
Hammer
Flathead Screwdriver Phillips Screwdriver
1/4" Drill Bit
Channel Lock Wrench
T-11
Safety Glasses
T-12
Plumber Putty
T-13 T-14
5
Tape Measure Denatured AlcoholCloth
T-15 T-16
3/32" Allen Wrench
Scissors
T-17
A-3
A-4
A-5
Soap/Lotion Hole Cover
Remove Hose Protector (A-5), Hex
M19 Nut (A-4) and Horseshoe
Gasket (A-3) from bottom of faucet.
TOP MOUNT INSTALLATION
6
23
Apply foam adhesive (T-1 ) Included
to the back of sink (B-1).
T-1
B-1
1
E
A-4
A-8
A-3
A-8
Tighten (A-4) with Hex M19 Nut
Installation Tool (A-8). Use
screwdriver through hole in
Installation Tool (A-8) to tighten
firmly.
E
Place Deck Plate (A-2) on to sink.
Place Faucet Body (A-1) into deck
plate and sink.
A-2
A-1
E
A-3
A-1
Slide (A-3) up onHorseshoe Gasket
to Faucet Body (A-1) under sink.
E
A-3
5
46
Remove soap/lotion hole cover (B-2)
from hole.
C-3
From under the sink, thread and
tighten the Bottle (C-3) onto
Threaded Shank (C-4)
C
D
A-5
Thread and tighten Hose Protector
(A-5) onto bottom of Faucet (A-1).
A
B
1
2
3
Connect Faucet (A-1) Spray Hose
A to Quick Connect Adaptor B.
Tighten weight (A-7) to spray hose
(A-9) with 2 screws provided. Measure
15 inches down from the underside
of the faucet on the spray hose. Pull
the faucet out of the spout to test
the distance and the retracting action.
Move the weight if necessary.
Be careful not to put weight so far
down on the hose that it rests on
the floor of the cabinet, or the spray
head won't retract all the way.
A-7
T-4
C-6
Secure Threaded Shank (C-4) by
sliding 1 Rubber Gasket (C-5)
onto bottom of Threaded Shank
(C-4) and tighten Tightening Nut
(C-6).
C-5 C-6
C-3
C-5
Slide 1 Rubber Gasket (C-5) onto
the bottom of the Threaded Shank
(C-4). Insert Threaded Shank
through Soap Dispenser sink hole.
10
89
12
7
11
7
T-5 B-3
T-17
T-7
Drill pilot holes (1/2" bit) on cut line.
Warning: Safety Glasses
recommended (T-12).
D-1
D-2
D-3
D-4
D-5
Prepare strainer for installation.
Loosen the Lock Nut, check to
ensure that all parts are complete.
T-11
Wipe any excess Plumber's Putty
away from top of the sink hole.
Place the Bottom Seal (D-4) on the
underside of the Strainer Bowl (D-2)
and tighten with Strainer Nut (D-5)
using Channel Lock Wrench (T-11).
D-2
D-2
D-3
D-3
D-4
D-5
D-4
D-5
Set the Strainer Bowl (D-2) and Top
Seal (D-3) into the hole from above
and push down firmly.
Apply a 1/4” bead of Plumber's
Putty (T-13) around the sink drain
hole as shown above.
Repeat for both sink holes.
18
16 17
15
14
13
8
Cut out the template with
Scissors (T-17) alone the
top-mount installation line.
Place template on countertop, trace
a pencil line around the inside of
template.
Center sink within counter opening.
Apply even pressure to all sides.
T-10
3/8"
(6mm)
1/8"
(3mm)
Apply a bead of silicon 1/8"-1/4"
away from edge of counter cutout
and then align sink on counter.
Carefully cut the counter hole using
a Jig Saw (T-6). Carefully cut along
the inside of the drawn cut line.
T-6
Clean edge of counter top cutout
by Cloth ) and Alcohol . (T-15 (T-16)
x12
E-1
E-2
Prepare to install mounting clips
with screws (E-1/E-2).
Slide Mounting Clips (E1 & E2) into
sink mounting rails. Center Clips
along each side of the sink, 2 Clips
on the 22” sides and 4 Clips on
the 33” sides as shown.
24
23
22
9
21
19 20
T-16
T-15
Hot
Cold
3/8" (9.5mm)
Hot
T-8
Clean excess silicon from edge of
of sink with rag.
Turn on hot and cold water by
turning handles counter clockwise,
turn on sink faucet and run for 5
minutes to make sure no leaks.
Attach hot and cold supply lines
(A-6) to shutoff valves. Tighten
with wrench clockwise until secure.
Connect the P-trap ( ) Not included
to the strainer.
10
6
12
4
7 1
9
5
2 3
8
11
Tighten mounting clips in numeral
order using flat head screwdriver
as shown above.
(Do not over tighten).
Tighten the screw (E-1).
Note: You might find it handy to
use flash light or hand held
worklight.
27
30
29
28
26
25
10
Table of contents
Languages:
Other AFA Plumbing Product manuals
Popular Plumbing Product manuals by other brands
Weka
Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS
Kohler
Kohler K-6228 Installation and care guide
UBERHAUS DESIGN
UBERHAUS DESIGN 75175017 Operator's manual
American Standard
American Standard DetectLink 6072121 manual
Uponor
Uponor Contec TS Mounting instructions
Pfister
Pfister Selia 49-SL Quick installation guide
Kohler
Kohler Centerset K-15240 Homeowner's guide
Viega
Viega Prevista Dry 8522.33 Instructions for use
Sanela
Sanela Lema SLP 59RB Instructions for use
Elkay
Elkay EDF15AC Installation, care & use manual
Hans Grohe
Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions
baliv
baliv WT-140 manual