Advantech WISE-1840 User manual

User Manual

WISE-1840

EPD Network

Control Card

Wireless ePaper Display Solution

WISE-1840 User Manual ii

The documentation and the software included with this product are copyrighted 2019

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

ARM is trademarks of ARM Corporation.

TI is trademarks of Texas Instruments Inc..

ITE is trademarks of ITE Tech Inc..

Eink is trademarks of E ink holding Inc..

Microsoft Windows are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Part No. Edition 1

August 2019

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of -control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

WISE-1840 User Manual iv

Declaration of Conformity

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions:

(1)

This device may not cause harmful interference, and

(2)

this device must accept any interference received, including interference that may

cause undesired operation.

IMPORTANT NOTE:

FOR MOBILE DEVICE USAGE (>20cm/low power)

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncon-

trolled environment. This equipment should be installed and operated with minimum

distance 20cm between the radiator & your body.

USER MANUAL OF THE END PRODUCT:

In the user manual of the end product, the end user has to be informed to keep at

least 20cm separation with the antenna while this end product is installed and oper-

ated. The end user has to be informed that the FCC radio-frequency exposure guide-

lines for an uncontrolled environment can be satisfied.

The end user has to also be informed that any changes or modifications not

expressly approved by the manufacturer could void the user's authority to operate

this equipment.

If the labelling area is small than the palm of the hand, then additional FCC part 15.19

statement is required to be available in the user manual: This device complies with

Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference and (2) this device must accept any inter-

ference received, including interference that may cause undesired operation.

LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains

TX FCC ID: M82-WISE-1840 ".

If the labelling area is larger than the palm of the hand, then the following FCC part

15.19 statement has to also be available on the label: This device complies with Part

15 of FCC rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference and (2) this device must accept any interference

received, including interference that may cause undesired operation.

NCC

XXXyyyLPDzzzz-x

Technical Support and Assistance

Visit the Advantech website at http://support.advantech.com where you can find

the latest information about the product.

Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

Product name and serial number

Description of your peripheral attachments

Description of your software (operating system, version, application software,

etc.)

A complete description of the problem

The exact wording of any error messages

WISE-1840 User Manual

Packing List

Before setting up the system, check that the items listed below are included and in

good condition. If any item does not accord with the table, please contact your dealer

immediately.

WISE-1840 mini-PCIe card

Part No. Description

WISE-1840WTB-TD010

EPD coordinator control card in Full-Mini Card Form

Factor

193B0204C0 F/S D=3.5 H=0.8 (1+) M2*4L ST/H BZn NK

Ordering Information

Part No. Description

WISE-1840WTB-TD010

EPD coordinator control card in Full-Mini Card

vii

WISE-1840 User Manual

Safety Instructions

Read these safety instructions carefully.

Keep this User Manual for later reference.

Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10.

All cautions and warnings on the equipment should be noted.

11.

If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12.

Never pour any liquid into an opening. This may cause fire or electrical shock.

13.

Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14.

If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to

the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

WISE-1840 User Manual

viii

Consignes de Sécurité

Lisez attentivement ces instructions de sécurité.

Conservez ce manuel de l'utilisateur pour référence ultérieure.

Débranchez cet appareil de toute prise secteur avant le nettoyage Utilisez un

chiffon humide. N'utilisez pas de détergents liquides ni en spray pour le nettoy-

age

Pour les équipements enfichables, la prise de courant doit être située à proxim-

ité de l'équipement et doit être facilement accessible.

Gardez cet équipement à l'abri de l'humidité.

Placez cet équipement sur une surface fiable lors de son installation

Les ouvertures de l'enceinte sont destinées à la convection de l'air. Protégez le

matériel contre la surchauffe. NE COUVREZ PAS LES OUVERTURES.

Assurez-vous que la tension de la source d'alimentation est correcte avant de

connecter l'équipement à la prise de courant.

Placez le cordon d'alimentation de sorte que personne ne puisse marcher des-

sus. Ne placez aucun objet sur le cordon

10.

Toutes les mises en garde et avertissements sur l'équipement doivent être

notés

11.

Si l'équipement n'est pas utilisé pendant une longue période, débranchez-le de

la source d'alimentation pour éviter tout dommage d? à une surtension transit-

oire

12.

Ne jamais verser de liquide dans une ouverture sous peine de provoquer un

incendie ou un choc électrique

13.

Ne jamais ouvrir l'appareil.Pour des raisons de sécurité, cet équipement ne doit

être ouvert que par du personnel qualifié

14.

Si l'une des situations suivantes se produit, faites vérifier l'équipement par le

personnel de service:

Le cordon d'alimentation ou la fiche est endommagé.

Un liquide a pénétré dans l'appareil.

L'équipement a été exposé à l'humidité.

L'équipement ne fonctionne pas bien ou vous ne pouvez pas le faire fonction-

ner conformément au manuel d'utilisation.

Equipment L'équipement est tombé et a été endommagé.

Equipment L'équipement présente des signes évidents de rupture.

AVERTISSEMENT: Cet ensemble d'instructions est donné conformément à la norme

CEI 704-1. Advantech décline toute responsabilité quant à l'exactitude des déclara-

tions contenues dans le

WISE-1840 User Manual

Contents

Chapter 1 Introduction ......................................... 1

Chapter 2 EPD Hardware Specification .............. 7

WISE-1840 User Manual

4.1.1

Chapter 3 WISE-EC EPD Design-in Service ... 109

5.1

The Acquisition of Information ................................................................ 110

5.1.1

Design ........................................................................................ 111

5.1.2

Integration .................................................................................. 112

5.1.3

Production .................................................................................. 112

5.2

Contact Information ................................................................................ 113

5.3

Global Service Policy ............................................................................. 113

5.3.1

Warranty Policy .......................................................................... 113

5.3.2

Repair Process ........................................................................... 114

Table of contents

Other Advantech Control Unit manuals

Advantech

Advantech MIC-75G20-10B1 Installation and operation manual

Advantech

Advantech WISE-1510 User manual

Advantech

Advantech PCM-23C1CF User manual

Advantech

Advantech EWM-W179M201E User manual

Advantech

Advantech USB-4711A User manual

Advantech

Advantech MIO-6255 Installation and operation manual

Advantech

Advantech PCM-3680 Installation and operation manual

Advantech

Advantech Adam 4000 Series User manual

Advantech

Advantech SOM 144 Guide

Advantech

Advantech SOM-5894 User manual

Advantech

Advantech PCM-233A Installation and operation manual

Advantech

Advantech SOM-5897 User manual

Advantech

Advantech PCM-3665 PC/104-Plus Installation and operation manual

Advantech

Advantech ADAM-3750 3-Wire Series Installation and operation manual

Advantech

Advantech USB-4716 Installation and operation manual

Advantech

Advantech WISE-1510 User manual

Advantech

Advantech WISE-2211 Installation and operation manual

Advantech

Advantech SOM-2569 User manual

Advantech

Advantech MIO-6254 Installation and operation manual

Advantech

Advantech PCM-3614 User manual

Advantech

Advantech ROM-7510 User manual

Advantech

Advantech EH-8100 User manual

Advantech

Advantech USB-4716 User manual

Advantech

Advantech MOS-1120Y-0201E User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual