Advantech ADAM-3016 User manual

ADAM-3016

Strain Gauge Input Module

User’s Manual

ADAM and the ADAM logo are trademarks of Advantech

Part no. 2000016000 1st Edition

Printed in Taiwan August 1997

Introduction

ADAM-3016 is a DIN rail-mounted strain gauge input signal conditioning module

with 1000 VDC 3-way isolation between input, output and power. The switch con-

figurable input and output offers flexible, wide ranging capability for strain gauge.

ADAM-3016 is equipped with a power LED to monitor the line power and a DC-to-

DC converter status and 3 VR (ZERO, SPAN, EXCI) to calibrate input/output

range and excitation voltage.

The ADAM-3016 features three-way isolation. The power supply that drives the

module’s input circuitry and output circuitry is internally isolated, enabling

ADAM-3016 to offer true channel-to-channel isolation.

ADAM-3016’s input bandwidth is typically 2.4 kHz. The ADAM-3016 is powered

by a single +24VDC input. Power can be easily connected from the adjacent

modules, making the wiring simple and easy to maintain. The ADAM-3016 can

be mounted on a DIN rail and operate in environments with high humidity and

wide temperature variation.

Features

•1000 VDC (fully-isolated)

•Easy input/output range configuration

•Flexible DIN-rail mounting

•Low power consumption:

£ 1.85 W (voltage output)

£2.15 W (current output)

•–10° to 70° C operating temperature range

•Operates from a single +24 VDC input

Specifications

Voltage specifications

• Electrical input: ± 10 mV, ± 20 mV, ± 30 mV, ±50 mV, ±100 mV

•Excitation voltage: 1 ~ 10 VDC (60 mA max) (factory default 10 V)

Output

•Voltage output

Bipolar: ±5 V, ±10 V

Unipolar: 0 ~ 10 V

Impedance: < 50 W

•Current output

Current: 0 ~ 20 mA

Current load resistor: 0 ~ 500 W(source)

Specifications

General

•Three-way isolation: 1000 VDC

•Accuracy: ±0.1% of full range

•Bandwidth: 2.4 kHz (typical)

•Stability (temperature drift): 150 ppm (typical)

•Isolation mode rejection: >100 dB @ 50 Hz/60 Hz

•Operation temperature range: -10° to 70° C

Power

•Range: 24 VDC ±10%

•Consumption: £ 1.85 W (voltage output)

£2.15 W (current output)

Ordering Information

•ADAM-3016: Isolated strain gauge signal conditioning module

•ADAM-3920: 20-pin wiring adapter

•ADAM-3937: 37-pin wiring adapter

•ADAM-4350: Intelligent calibrator

•PWR-242: Switching power supply for DIN rail mounting

Configuration

Figure 1 shows the terminal wiring of ADAM-3016. Positive power terminals 9

and 7 are internally connected, as are negative terminals 12 and 10. Power can

be connected through the adjacent modules, making wiring much easier.

ADAM-3016 uses single +24 VDC. Table 1 and table 2 show the switch positions

to configure input and output range. The I/O configuration switches are located

insidethe module. Toreach theswitches, youneed toremove theDIN-rail bracket

by sliding it down.

Figure 1: Terminal wiring diagram

+24 V 9

GND 12

Out+ 8

4 EXCI +

7 +24V

10 GND

11 Out-

2 In-

SW1 SW2

EXCI - 5

1 In+

EXCI

ZERO

SPAN

Input Range Setting (SW2)

Table 1: Input range setting (SW2)

Input Range (SW2)

Range 1 2 3 4 5

+/- 10mV On

+/- 20mV On

+/- 30mV On

+/-50mV On

+/- 100mV On

Table of contents

Other Advantech Control Unit manuals

Advantech

Advantech USB-4711A User manual

Advantech

Advantech EH-8100 User manual

Advantech

Advantech PCM-3618 User manual

Advantech

Advantech INTRAC INTRAC-305 Instruction Manual

Advantech

Advantech RISC SOM-A2558 Series User manual

Advantech

Advantech SOM-6898 User manual

Advantech

Advantech WISE-1840 User manual

Advantech

Advantech PCM-3110 User manual

Advantech

Advantech SOM-5893 User manual

Advantech

Advantech PCM-3664 Installation and operation manual

Advantech

Advantech RISC Module SOM-A2552 User manual

Advantech

Advantech ADAM-2000 Series User manual

Advantech

Advantech APAX-5202P User manual

Advantech

Advantech MOS-1130Y-0201E User manual

Advantech

Advantech PCM-3380 Installation and operation manual

Advantech

Advantech MIC-75M11 User manual

Advantech

Advantech PCL-812PG User manual

Advantech

Advantech MIO-6254 Installation and operation manual

Advantech

Advantech PCM-3117 Installation and operation manual

Advantech

Advantech PCM-24BXWF Installation and operation manual

Advantech

Advantech AIW-357 DK-G2U User manual

Advantech

Advantech WISE-2211 Installation and operation manual

Advantech

Advantech ADAM-5000 Series User manual

Advantech

Advantech MOS-2120-Z1101E User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual