Advantech PCM-3347 Series User manual

PCM-3347 Series/

PCM-3348 Series

STPC Elite 133MHz Module with

SVGA/LCD/LAN Interface and

STPC Consumer II 133MHz CPU

Module with VGA/LAN/SSD/FDD

Users Manual

PCM-3347 User’s Manual ii

All rights are reserved. The original manufacturer reserves the right to

make improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

the original manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original manufacturer

assumes no responsibility for its use, nor for any infringements upon the

rights of third parties which may result from its use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft WindowsÆ is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semiconductor Co., Ltd.

C&T is a trademark of Chips and Technologies, Inc.

UMC is a trademark of United Microelectronics Corporation.

Winbond is a trademark of Winbond Electronics Corp.

STPC is a trademark of SGS Thomson Corp.

For more information on this and other Advantech products, please visit

our website at:

http://www.advantech.com

http://www.advantech.com/ppc

For technical support and service, please visit our support website at:

http://www.advantech.com/support

This manual is for the PCM-3347F, PCM-3347L, PCM-3348F, PCM-

3348L.

Part No. 2006334710

1st. Edition Printed in Taiwan June 2003

iii

Packing List

Before you begin installing your card, please make sure that the following

materials have been shipped:

• PCM-3347 All-in-one single board computer

• 1 Start-up manual

• CD-ROM or Disks for utility, drivers, and manual (in PDF format)

• 1 2.5" IDE flat cable, 44-pin to 44-pin (product no. 1701440350)

• 1 KB/Mouse EXT Y-Cable (product no. 1703060053)

• 1 keyboard / PS2 mouse cable (product no. 1700060202)

• 3 serial port cables (product no. 1700100250)

•1 RS-422/485 cable (product no. 1700090301)

• 1 parallel cable (product no. 1700260250)

• 1 26-34 pin FDD cable converter (product no. 9681000044)

• 1 floppy cable, for 3.5" FDD only (product no. 1701340600)

• 1 VGA cable (product no. 1701160150)

• 1 LAN cable (product no. 1701100202)

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

PCM-3347 User’s Manual iv

v Table of Contents

Contents

Chapter 1 General Information ........................................2

1.1 Introduction ....................................................................... 2

1.2 Features ............................................................................. 3

1.3 Specifications .................................................................... 3

1.3.1 Standard SBC functions.................................................. 3

1.3.2 VGA function (PCM-3347 only).................................... 4

1.3.3 VGA function PCM-3348............................................... 4

1.3.4 Ethernet function............................................................. 4

1.3.5 Solid state disk ................................................................ 4

1.3.6 Mechanical and environmental....................................... 4

1.4 Board Dimensions ............................................................. 5

Figure 1.1:PCM-3347 Dimensions ................................. 5

Chapter 2 Introduction ......................................................8

2.1 Connectors (PCM-3348 has no LCD connectors)............. 8

Table 2.1:Connectors ...................................................... 8

2.2 Locating connectors ........................... 10

Figure 2.1:Locating connectors (component side) ....... 10

Figure 2.2:Locating connectors (solder side) ............... 11

2.3 Installation Procedures ......................... 12

2.4 Ethernet connector (CN2) (PCM-3347F/3348F) ............ 12

2.4.1 Ethernet connector (CN2)............................................. 12

2.5 LCD-A display connector (CN7) .................................... 12

2.6 Serial ports (CN5, CN6, CN8, CN9)............................... 13

2.6.1 COM1,COM3,COM4 RS-232 port (CN6,CN9,CN8) .. 13

2.6.2 COM2 RS-232/422/485 port (CN5, CN23).................. 13

Table 2.2:Serial port default settings ............................ 13

2.7 EIDE HDD connector (CN1) .......................................... 13

2.7.1 Connecting the hard drive............................................. 13

2.8 PC/104 connector (CN17, CN19) ................................... 14

2.9 Parallel port connector (CN12) ....................................... 14

2.10 Backlight connector (CN3) PCM-3347........................... 14

2.11 VGA connector (CN10) .................................................. 14

2.11.1 CRT display connector (CN10) .................................... 15

2.12 Reset button connector (CN13)....................................... 15

2.13 Main power (+5 V / +12 V) connector (CN14) .............. 15

2.14 PS/2 Keyboard/mouse connector (CN18) ....................... 15

2.15 5 V connector (CN16)..................................................... 16

2.16 FDD connector (CN22)................................................... 16

2.16.1 Connecting the floppy drive ......................................... 16

PCM-3347 User’s Manual vi

2.17 LCD-B connector (CN11)............................................... 17

2.18 CompactFlash™ socket (CN22) ..................................... 17

2.19 I2C BUS (CN4).............................................................. 17

2.20 HDD LED connector (CN15) ......................................... 17

2.21 SIR connector (CN20)..................................................... 18

Chapter 3 Software Configuration .................................20

3.1 Introduction ..................................................................... 20

3.2 Connections for four standard LCDs (PCM-3347) ......... 20

3.2.1 Sharp LM64183P,LM64P89 (640x480 DSTN MONO

LCD) ....................................... 20

Table 3.1:Sharp LM64183P & LM64P89 .................... 20

3.2.2 Toshiba LTM10C042(640x480 TFT color LCD) ........ 21

Table 3.2:Connections to Toshiba LTM10DC042 ....... 21

3.2.3 Sharp LM64C142(640x 480 DSTN color LCD) .......... 22

3.2.4 Connections to Toshiba LTM12C275A (800 x 600 TFT

color LCD)....................................................................... 23

3.3 Ethernet software configuration ...................................... 24

Chapter 4 Award BIOS Setup.........................................28

4.1 System test and initialization........................................... 28

4.1.1 System configuration verification................................. 28

4.1.2 Further CMOS Data Safeguards ................................... 28

4.2 Award BIOS setup .......................................................... 29

4.2.1 Entering setup ............................................................... 29

4.2.2 Standard CMOS setup .................................................. 30

Figure 4.1:BIOS setup initial screen............................. 30

4.2.3 Advanced CMOS setup ................................................ 31

Figure 4.2:Standard CMOS setup screen...................... 31

4.2.4 Advanced chipset setup ................................................ 31

Figure 4.3:Advanced chipset setup............................... 31

4.2.5 Power management setup ............................................. 32

Figure 4.4:Power management setup............................ 32

4.2.6 PCI / Plug and Play configuration ................................ 32

Figure 4.5:Plug and Play Configuration ....................... 32

4.2.7 Peripheral setup............................................................. 33

Figure 4.6:Peripheral setup ........................................... 33

4.2.8 Load BIOS defaults ...................................................... 33

4.2.9 Change password .......................................................... 33

4.2.10 Save settings and exit.................................................... 34

Figure 4.7:Save and exit settings .................................. 34

4.2.11 Exit without saving ....................................................... 34

Chapter 5 SVGA Setup....................................................36

5.1 Introduction ..................................................................... 36

5.1.1 Chipset .......................................................................... 36

vii Table of Contents

5.1.2 Display memory............................................................ 36

5.2 Installation of SVGA driver ............................................ 36

5.2.1 Installation for Windows 3.1 ........................................ 37

5.2.2 Installation for Windows 95 ......................................... 40

Chapter 6 PCI SVGA Setup ............................................48

6.1 Introduction ..................................................................... 48

6.1.1 Chipset .......................................................................... 48

6.1.2 Display memory............................................................ 48

6.1.3 Display types................................................................. 48

6.2 Installation of the SVGA Driver ..................................... 49

6.2.1 Installation for Windows 3.1 ........................................ 49

6.2.2 Installation for Windows 95 ......................................... 53

6.2.3 Installation for Windows NT ........................................ 58

6.3 Further information ......................................................... 62

Chapter 7 PCI Bus Ethernet Interface...........................64

7.1 Introduction ..................................................................... 64

7.2 Installation of Ethernet driver ......................................... 64

7.2.1 Installation for MS-DOS and Windows 3.1.................. 64

7.2.2 Installation for Windows 95/98 .................................... 65

7.2.3 Installation for Windows NT ........................................ 69

7.3 Further information ......................................................... 72

Appendix A Programming the Watchdog Timer .............74

A.1 Programming the watchdog timer ................................... 74

Appendix B Installing PC/104 Modules ............................78

B.1 Installing PC/104 modules .............................................. 78

Table B.1:PCM-3347/PCM-3348 PC/104 (CN12)....... 80

Appendix C Pin Assignments .............................................84

C.1 Ethernet connector (CN2) ....................... 84

Table C.1:Ethernet connector (CN2) ............................ 84

C.2 LCD-A connector (CN7)........................ 85

C.3 COM1, COM3, COM4 connector (CN6, CN 9, CN8) ... 86

Table C.3:COM1,COM3,COM4 (CN6,CN 9,CN8) ..... 86

C.4 COM2 connector (CN5, CN23) ...................................... 87

C.5 EIDE hard drive connector (CN1) .................................. 88

Table C.6:EIDE hard drive connector (CN1) ............... 88

C.6 PC/104 connector (CN17, CN19) ................................... 89

C.7 Parallel port connector (CN12) ................... 89

Table C.7:Parallel port connector (CN12).................... 89

C.8 Backlight connector (CN3) ...................... 90

Table C.8:Backlight connector (CN3) .......................... 90

C.9 VGA connector (CN10) ........................ 90

Table C.9:VGA connector (CN10)............................... 90

PCM-3347 User’s Manual viii

C.10 Reset button connector (CN13)................... 91

Table C.10:Reset button connector (CN13) ................. 91

C.11 Main power (+5 V) connector (CN14) ............. 92

Table C.11:Main power (+5 V) connector (CN14) ...... 92

C.12 PS/2 keyboard/mouse connector (CN18) ........... 92

Table C.12:PS/2 keyboard/mouse connector (CN18)... 92

C.13 5 V connector (CN16) .......................... 93

C.14 FDD connector (CN22)................................................... 94

Table C.14:FDD connector (CN22).............................. 94

C.15 LCD-B connector (CN11) ....................... 95

Table C.15:LCD-B connector (CN11).......................... 95

C.16 CompactFlash™ socket (CN21) ..................................... 96

Table C.16:CompactFlash™ socket (CN21) ............... 96

Figure C.1:CompactFlash™ socket .............................. 97

Table C.17:I2C BUS connector (CN4)......................... 97

Appendix D System Assignments .....................................100

D.1 System I/O ports............................................................ 100

Table D.1:System I/O ports ........................................ 100

D.2 DMA channel assignments............................................ 101

Table D.2:DMA channel assignments ........................ 101

D.3 Interrupt assignments .................................................... 102

D.4 1st MB memory map .................................................... 103

Table D.4:1st MB memory map ................................. 103

Appendix E LCD Services ..................................................98

E.1 LCD Services .................................................................. 98

CHAPTER

General Information

This chapter gives background infor-

mation on the 3347/PCM-3348.

Sections include:

• Introduction

• Features

• Specifications

• Board dimensions

PCM-3347 User’s Manual 2

Chapter 1 General Information

1.1 Introduction

The PCM-3347 is the ultimate cost-effective PC/104 solution for limited-

space applications. It offers all the functions of an AT-compatible indus-

trial computer on a single board, and occupies less space than a 3¾" hard

drive. The PCM-3347 comes with an embedded STPC Elite 133MHz

processor on board. The PCM-3348 comes with an embedded STPC Con-

sumer II processor on board. For maximum performance, the PCM-3347

also supports on board memory that can accept up to 32/64 MB memory.

Onboard features include a socket for a CompactFlash™ Card, 100Base-

T Ethernet, Enhanced IDE interface, one parallel port, four serial ports

(RS-232), a keyboard, and a PS/2 mouse interface. A SVGA LCD display

controller allows CRT resolutions up to 1024 x 768 @ 16bpp colors, LCD

resolutions up to 1024 x 768 @ 16bpp colors. There is no LCD support

for the PCM-3348 series.

If you need any additional functions, the PCM-3347/PCM-3348 has a PC/

104 connector for future upgrades.

This manual suits for next models

Table of contents

Other Advantech Control Unit manuals

Advantech

Advantech USB-4711A User manual

Advantech

Advantech MIC-75M40 Installation and operation manual

Advantech

Advantech B+B SmartWorx iMcV-LIM User manual

Advantech

Advantech PCM-3345 User manual

Advantech

Advantech SOM-6898 User manual

Advantech

Advantech DVP-1020 User manual

Advantech

Advantech PCM-3643 Installation and operation manual

Advantech

Advantech PCM-24BXWF Installation and operation manual

Advantech

Advantech PCM-3614I Installation and operation manual

Advantech

Advantech ADAM-6217 User manual

Advantech

Advantech EWM-W179M201E User manual

Advantech

Advantech MOS-1130Y-0201E User manual

Advantech

Advantech iDAQ-817 User manual

Advantech

Advantech MIO-6255 Installation and operation manual

Advantech

Advantech B+B SmartWorx IE-iMcV-2xLIM User manual

Advantech

Advantech PCM-3526 Installation and operation manual

Advantech

Advantech PCM-3117 Installation and operation manual

Advantech

Advantech WISE-1510 User manual

Advantech

Advantech Network Device USB-4761 Installation and operation manual

Advantech

Advantech MIO-6250 MIO/160 Installation and operation manual

Advantech

Advantech PCL-832 User manual

Advantech

Advantech Network Device USB-4761 Installation and operation manual

Advantech

Advantech Qseven SOM-3567 User manual

Advantech

Advantech PCM-3910 Installation and operation manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual