ADEMCO VIA-30PSE User manual

For a detailed review of the entire system, please view the Ademco Via –30PSE system manual.

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].

To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Ademco Via 30PSE operates on a UB 1270 battery.

Quick Guide: Ademco Via-30PSE

Loss of AC power and use of backup battery power is indicated by NO AC. or AC LOSS.

A low battery condition is indicated by BAT or SYSTEM LO BAT

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number].

To unbypass a zone, disarm the system.

Change Time and Date

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [2] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, enter your [security code] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the alarm

event history.

Security Codes

Your system allows for additional users, however only the Master user can assign user codes to users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three seconds

for the keypad to verify.

Trouble Conditions

Trouble conditions are issues that require your attention and are indicated on your panel’s display by the

word CHECK + zone number and accompanied by beeping from the touchpad.

To silence Trouble Conditions beeping, check that the zone’s protected areas are closed and secure.

For wireless sensors, check that no environmental changes have blocked the wireless sensor.

If the problem is corrected, enter your [security code] + [OFF] sequence twice.

For a list of Trouble Conditions other than CHECK, please see your Ademco Via –30PSE system manual.

Other manuals for VIA-30PSE

Table of contents

Other ADEMCO Security System manuals

ADEMCO

ADEMCO 5120XM User manual

ADEMCO

ADEMCO Counterforce CFV15P Operating instructions

ADEMCO

ADEMCO VISTA User manual

ADEMCO

ADEMCO 4150 User manual

ADEMCO

ADEMCO Vista-10P User manual

ADEMCO

ADEMCO Vista-20 User manual

ADEMCO

ADEMCO VISTA-20SEA User manual

ADEMCO

ADEMCO 4160-12 C-COM User manual

ADEMCO

ADEMCO VISTA-50P User manual

ADEMCO

ADEMCO Ademco VISTA-40 User manual

ADEMCO

ADEMCO UVS User manual

ADEMCO

ADEMCO VISTA-100 User manual

ADEMCO

ADEMCO Q16 Installation instructions

ADEMCO

ADEMCO VISTA XM Series Product manual

ADEMCO

ADEMCO ALERT III User manual

ADEMCO

ADEMCO 4110DLa User manual

ADEMCO

ADEMCO VISTA-100 User manual

ADEMCO

ADEMCO Vista-10P Assembly instructions

ADEMCO

ADEMCO Vista-20 User manual

ADEMCO

ADEMCO VISTA-20PS User manual

ADEMCO

ADEMCO LYNXR24 User manual

ADEMCO

ADEMCO VISTA-20P Series Assembly instructions

ADEMCO

ADEMCO VISTA-128B User manual

ADEMCO

ADEMCO VISTA-100 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual