Addonics Technologies Jupiter ExDrive User manual

Addonics

T E C H N O L O G I E S

Jupiter ExDrive

For the following models:

AJEDIU, AJEDIF, AJEDIS, AJEDIC

AJEDSAU, AJEDSAF, AJEDSAS, AJEDSAC

User’s Guide

Version 1.0

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 1

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class

B digital device pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy. If not installed and used in accordance with the instructions,

it may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If the

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment on and off, the user is

encouraged to try and correct the interference by one or more of the following

suggestions.

• Reorient or relocate the receiving antenna

• Increase the distance between the equipment and the receiver

• Connect the equipment to a different power outlet other than the

one where receiver is connected

• Consult a certified television or radio technician

LIMITED WARRANTY

Addonics guarantees that every product is free from physical defects in material

and workmanship during the warranty period specified for each product when

used within the limits set forth in the Specifications section in the user guide.

Unauthorized tampering of the product or using it outside the scope of the

product specifications will result in voiding the warranty. If the product proves

defective during this warranty period, call Addonics Technical Support to

obtain a Return Authorization number. BE SURE TO HAVE YOUR PROOF

OF PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS

CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When

returning a product, mark the Return Authorization number clearly on the

outside of the package and include your original proof ofpurchase. Customers

are responsible for paying the shipping and handling of the products to

Addonics warranty service location.

IN NO EVENT SHALL ADDONICS’ LIABILITY EXCEED THE PRICE

PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR

ITS DOCUMENTATION. Addonics makes no warranty or representation,

expressed, implied, or statuary, with respect to its products or the contents or

use of the user guide and all accompanying software, and specifically disclaims

its quality, performance, merchantability, or fitness for any particular purpose.

Addonics reserves the right to revise or update its products, software, or

documentation without obligation to notify any individual or entity.

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 2

Contents

FCC Warning...................................................................................1

Limited Warranty............................................................................1

Contents............................................................................................2

Chapter 1 General Information .........................................................3

Features............................................................................3

Chapter 2 Jumper Setting for Jupiter ExDrive................................4-5

For 2.5” IDE Hard Disk Drive .........................................4

For 2.5” SATA Hard Disk Drive......................................5

Chapter 3 Hardware Installation Guide..........................................6-9

Chapter 4 Attaching USIB Interface Cable .....................................10

Chapter 5 USB2.0 USIB Interface Cable Driver Installation ......11-12

Serial ATA USIB Interface Cable Driver Installation ....13

Firewire USIB Interface Cable Driver Installation .........14

CardBus USIB Interface Cable Driver Installation ....15-17

How to use Disk Management ...................................18-19

Technical Support & Contact Information................................ …20

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 3

Chapter 1

General Information

The Addonics Technologies Jupiter ExDrive is a portable 2.5” Hard Disk Drive

kit. The unit is external and uses the USB2.0, Firewire/iLink, CardBus and

Serial ATA interfaces.

Features

• Stylished and rugged black anodized aluminum housing

• Compact size and light weight

• Shock proof -up to 3 feet drop damage protection for the hard drive

• Easy hard drive installation

• Choice of standard or encryption drive enclosure

• The most versatile hard drive kit in the market

• Connect as an External Hard drive to any computer via USB2.0, CardBus,

Firewire/iLink and Serial ATA port (only one of these cables is included in

the kit)

• Turn any 2.5” hard drives into external hard drive or removable hard drive

• Use as a removable Hard Drive on Desktops PC with an optional IDE drive

cradle.

• Plug & Play Operation under Windows 98SE, Me, 2000, XP and 2003

Server

• Portable: Fits any Briefcase or Notebook PC Case.

Jupiter ExDrive

Item Number Product Description

AJEDIU Jupiter ExDrive for 2.5” IDE hard drive with USB 2.0

AJEDIF Jupiter ExDrive for 2.5” IDE hard drive with

Firewire/iLink

AJEDIS Jupiter ExDrive for 2.5” IDE hard drive with SATA

AJEDIC Jupiter ExDrive for 2.5” IDE hard drive with CardBus

AJEDSAU Jupiter ExDrive for 2.5” SATA hard drive with USB 2.0

AJEDSAF Jupiter ExDrive for 2.5” SATA hard drive with

Firewire/iLink

AJEDSAS Jupiter ExDrive for 2.5” SATA hard drive with SATA

AJEDSAC Jupiter ExDrive for 2.5” SATA hard drive with CardBus

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 4

Chapter 2

Jumper Settings Inside the Jupiter ExDrive Drive Case

A. If the Jupiter ExDrive will be used externally with the external AC adapter,

the switch from the case must be switch to the right, labeled EXT to grab

power from external power supply.

Application: Jupiter ExDrive can be set to receive power EXT and be used

with all four types of USIB cables.

B. If the Jupiter ExDrive will beused externally without the external AC

adapter, the switch from the case must be switch to the left, labeled INT to

grab power from system.

Application: Jupiter ExDrive can be set to receive power INT and be used with

the following types of USIB cables: USB2.0 USIB & Firewire USIB

FOR 2.5” IDE HARD DISK DRIVE

Note: We recommend setting the hard drive to MASTER mode/setting at all

times. (Default setting)

J4 Pin Definition for Master Setting

J1 Pin Definition for USIB Interface

Hard Drive Brand J4 Jumper Setting

Hitachi

NEC

Fujitsu

Toshiba

Seagate

Pin 1~6 Open

Hard Drive Setting J1 Jumper Setting

Master Pin 3 - Pin 5 Short

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 5

FOR 2.5” SATA HARD DISK DRIVE

J2 Pin Definition for USIB Interface

Pin 3 - Pin 5 shorted

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 6

Chapter 3

Hardware Installation Guide

FOR 2.5” IDE HARD DISK DRIVE

FOR 2.5” SATA HARD DISK DRIVE

shock

absorbers

PCB

top cover

2.5” hard drive

bottom cover

switch

screw

shock

absorbers

PCB

top cover

2.5” SATA hard drive

bottom cover

switch

screw

IDE connector

SATA

connector

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 7

Step 1

Separate the top from the bottom cover

of the drive enclosure by loosening the

screw as shown on the photo.

Step 2

(IDE HDD) Align the male IDE connector on the

2.5” hard drive with the female IDE

connector on the PCB.

(SATA HDD) Align the SATA connector in the 2.5”

hard drive with the SATA connector on

the PCB.

Push the hard drive till the connector pins on the hard drive is fully seated

inside the connector on the PCB.

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 8

Step 3

Wrap the shock absorbers around

the hard drive and PCB.

Step 4

Turn over the PCB and secure the

hard drive to the PCB with the

mounting screws that come with the

kit.

Step 5

Mount the board to the bottom

cover.

Step 6

Put the top cover on by holding it in near

vertical position and sliding the two

metal clips inside the two small slots on

the rear of the bottom cover.

Addonics Technologies – Jupiter ExDrive User’s Guide v1.0 9

Step 7

Lower the front of the top cover and

making sure the two covers lined up

properly. Tighten the small retaining

screw on the front of the bottom cover

to close the enclosure.

This manual suits for next models

Table of contents

Other Addonics Technologies Storage manuals

Addonics Technologies

Addonics Technologies REDESP? REDESPU3 User manual

Addonics Technologies

Addonics Technologies ST55HPMXU User manual

Addonics Technologies

Addonics Technologies Sapphire Cipher II Snap-In SSN6G-256EU User manual

Addonics Technologies

Addonics Technologies RAID TOWER IX RT93DAHX User manual

Addonics Technologies

Addonics Technologies ST45HPMXA-B User manual

Addonics Technologies

Addonics Technologies DCHDIES User manual

Addonics Technologies

Addonics Technologies AD25MSD User manual

Addonics Technologies

Addonics Technologies NAS25HDU2 User manual

Addonics Technologies

Addonics Technologies AEMEDUSIB25F User manual

Addonics Technologies

Addonics Technologies RT5835HMEU Assembly Instructions

Addonics Technologies

Addonics Technologies RT93SNDHMS User manual

Addonics Technologies

Addonics Technologies Sapphire Mobile Rack II User manual

Addonics Technologies

Addonics Technologies AD25CFASTD User manual

Addonics Technologies

Addonics Technologies SCCHDSAU64 User manual

Addonics Technologies

Addonics Technologies DCDCS256S User manual

Addonics Technologies

Addonics Technologies RT54S2HMEU User manual

Addonics Technologies

Addonics Technologies RT134SDEU3 User manual

Addonics Technologies

Addonics Technologies ExDrive User manual

Addonics Technologies

Addonics Technologies AESNAPMRI User manual

Addonics Technologies

Addonics Technologies NAS NAST4SR5HPM-B User manual

Addonics Technologies

Addonics Technologies Sapphire Combo SBDRHEU User manual

Addonics Technologies

Addonics Technologies Combo Hard Drive25 IDE User manual

Addonics Technologies

Addonics Technologies RCHDSAES User manual

Addonics Technologies

Addonics Technologies JCCHDIF128 User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide