Addonics Technologies RCHDSAES User manual

Addonics

T E C H N O L O G I E S

Ruby Combo Hard Drive

RCHDSAES & RCHDSAEU

User’s Guide

Version 1.0

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class B digital

device pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy. If not installed and

used in accordance with the instructions, it may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user

is encouraged to try and correct the interference by one or more of the following

suggestions.

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to a different power outlet other than the one where receiver is

connected

Consult a certified television or radio technician

Enclosure Overview

Step 1 Separate the top from the bottom cover of the drive enclosure by

loosening the screw as shown on the photo.

Step 2 Align the SATA connector in the 2.5” hard drive with the SATA connector

on the PCB.

Step 3 Wrap the shock absorbers around the hard drive and PCB.

shock

absorbers

PCB

top cover

2.5” SATA

hard drive

bottom cover

switch

Step 4 Turn over the PCB and secure the hard drive to the PCB with the

mounting screws that come with the kit.

Step 5 Mount the board to the bottom cover.

Step 6 Put the top cover on by holding it in near vertical position and sliding the

two metal clips inside the two small slots on the rear of the bottom cover.

Step 7 Lower the front of the top cover and making sure the two covers lined up

properly. Tighten the small retaining screw on the front of the bottom cover to

close the enclosure.

Ruby Enclosure

Switch:

INT: This mode is used when the enclosure is placed inside a drive

cradle. For mobile rack kits, this is the mode used.

EXT: This mode is used if the enclosure is used as an external hard

drive.

Ruby Drive Cradle

Note: You can only use one power connector at a time. Either use the 4-pin

Molex or 15-pin SATA connector but not simultaneously use them.

Mounting holes for

3 ½” drive bay

15-pin SATA

power connector

4-pin Molex

power connector

Power LED and

Drive Access LED

Switch

7-pin SATA

data connector

Model: RCHDSAES

*Note: The Ruby combo hard drive with the eSATA interface must be connected

to a SATA controller with hot swap capability in order to add and remove drive

cartridge without rebooting. Please consult your motherboard or the add-in card

manufacturer to determine hot swap support on your SATA controller. All of the

Addonics SATA Host Controllers are hot swap capable.

For External Application:

Step 1: Connect the eSATA cable to the eSATA port at the back of the

enclosure. The other end of the cable connects to an eSATA host controller.

Step 2: Plug into the power jack located at the back of the enclosure, the power

adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate

power is provided to the drive.

Model: RCHDSAEU

For External Application:

Step 1: Connect the eSATA cable to the eSATA port at the back of the

enclosure. The other end of the cable connects to the eSATA port on the USB2.0

to eSATA adapter. Plug the adapter to a USB port on your system.

Step 2: Plug into the power jack located at the back of the enclosure, the power

adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate

power is provided to the drive.

Power adapter

eSATA cable

USB Port

Green LED showing

adapter connectivity

Red LED showing

adapter access

eSATA cable from

Ruby enclosure

For Internal Application: (Applies to both models)

Step 1: Connect a SATA cable to the 7-pin SATA data connector to the SATA

interface of the cradle.

Step 2: Connect a 15-pin SATA power cable from your system’s power supply to

the SATA interface of the cradle. This power connection provides power to the

ruby drive cartridge system.

Step 3: Slide the Ruby enclosure inside the cradle. To turn ON the drive

enclosure, place switch on INT position.

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics

Technical Support. Our technical staff will be happy to assist you, but they will

need your help to do so. Calling the technical support staff without all the proper

information can be both time consuming and frustrating. Here are some tips to

help you out:

MODEL NUMBER –Please have this number on hand.

SYSTEM INFORMATION –Type of computer, peripherals, etc.

OPERATING SYSTEM –What version of Windows

WHAT’S THE TROUBLE? – Give enough information

about your problem so that we can recreate and diagnose it.

FREE Software Drivers for all Addonics Technologies

Products are available 24 hours per day at the

World Wide Web Site: www.addonics.com.

Contact Information

Phone: 408-433-3899

Fax: 408-433-3898

Email: http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone: 408-433-3855

Hours: 8:30 am - 6:00 pm PST

Email: http://www.addonics.com/support/query/

Drive

enclosure

eSATA cable

Drive

cradle

This manual suits for next models

Other Addonics Technologies Storage manuals

Addonics Technologies

Addonics Technologies RT134SDEU3 User manual

Addonics Technologies

Addonics Technologies RT3DAHEU3 User manual

Addonics Technologies

Addonics Technologies Sapphire Mobile Rack II User manual

Addonics Technologies

Addonics Technologies ST13 User manual

Addonics Technologies

Addonics Technologies RTMPM6G User manual

Addonics Technologies

Addonics Technologies RT93SNDHMS User manual

Addonics Technologies

Addonics Technologies AD25MSD User manual

Addonics Technologies

Addonics Technologies CDC5HXAES User manual

Addonics Technologies

Addonics Technologies AERD25SN35 User manual

Addonics Technologies

Addonics Technologies AE25SNSP User manual

Addonics Technologies

Addonics Technologies REDESP? REDESPU3 User manual

Addonics Technologies

Addonics Technologies AD25CFASTD User manual

Addonics Technologies

Addonics Technologies DCDCS256S User manual

Addonics Technologies

Addonics Technologies ST45HPMXA-B User manual

Addonics Technologies

Addonics Technologies ExDrive User manual

Addonics Technologies

Addonics Technologies DCHDIES User manual

Addonics Technologies

Addonics Technologies ST55HPMXU User manual

Addonics Technologies

Addonics Technologies Sapphire Cipher II Snap-In SSN6G-256EU User manual

Addonics Technologies

Addonics Technologies AEMEDUSIB25F User manual

Addonics Technologies

Addonics Technologies AJCHDIU User manual

Addonics Technologies

Addonics Technologies External CipherChain User manual

Addonics Technologies

Addonics Technologies Sapphire Combo SBDRHEU User manual

Addonics Technologies

Addonics Technologies AEIDMD4U2 User manual

Addonics Technologies

Addonics Technologies AD25CFD User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide