ADC SL20 Gen II User manual
SL20 Gen II
Parts Manual
Phase 7
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 450599-2
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________ MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s)_____________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or theADC factory. When ordering replacement parts from the
factory,you canFAXyour ordertoADCat (508)678-9447ortelephone your order directly totheADCPartsDepartment
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
Retain This Manual In ASafe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayedon the equipment or specified in the installation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FORYOURSAFETY
Do not store or use gasoline or
other flammable vapors and
liquidsinthevicinityofthisor
anyotherappliance.
POURVOTRESÉCURITÉ
Ne pas entreposer ni utiliser d’essence
nid’autresvapeursouliquides
inflammables à proximité de cet appareil
oudetoutautreappareil.
SL20 PH7
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructionsmustbepostedinaprominentlocation near the dryer.
Table of Contents
Phase7.3 Non-CoinTopPanelAssembly forTopControl Models...............................................................................4
Phase7.5 Non-CoinTopPanelAssembly forTopControl Models...............................................................................5
Front PanelAssemblies ..............................................................................................................................................6
Phase 7.5 Non-Coin Bottom PanelAssembly for Bottom Control Models ...................................................................7
Phase 7.3 Non-Coin Bottom PanelAssembly for Bottom Control Models ...................................................................8
Phase 7.3 Coin Top PanelAssembly for Top Control Models ......................................................................................9
Phase 7.3 Coin Bottom PanelAssembly for Bottom Control Models ........................................................................10
MainDoorAssemblies .............................................................................................................................................. 11
Middle Front PanelAssembly ...................................................................................................................................12
Lint DrawerAssembly for Models Mfd. as of July 29, 2005 .......................................................................................13
Lint DrawerAssembly for Models Mfd. prior to July 29, 2005 ....................................................................................14
TumblerAssembly for Models Mfd. as of May 2004 ..................................................................................................15
TumblerAssembly for Models Mfd. prior to May 2004...............................................................................................16
RearSupport PanelAssembly ..................................................................................................................................17
FrontTumbler WheelAssemblies .............................................................................................................................18
RearTumblerWheelAssemblies ..............................................................................................................................19
Fire Suppression System PipingAssembly ..............................................................................................................20
TemperatureSensorAssemblies...............................................................................................................................21
MotorDriveAssembly ...............................................................................................................................................22
Direct SparkIgnition BurnerAssembly ......................................................................................................................24
Lint Box / Blower MotorAssembly ............................................................................................................................26
Electric OvenAssembly ............................................................................................................................................28
BlowerAssembly ......................................................................................................................................................29
BlowerMotorAssembly ............................................................................................................................................30
Front Electrical PanelAssembly...............................................................................................................................31
Sail Switch Assembly ...............................................................................................................................................32
Base / Top / Sides / Back Guard Assemblies ...........................................................................................................33
Pedestal Box Option.................................................................................................................................................34
AdditionalPartsAvailable .........................................................................................................................................35
4 American Dryer Corporation 450599-2
Phase 7.3 Non-Coin Top Panel Assembly
ForTopControlModels
Illus. No. Part No. Qty.Description
1 112579 1 Phase 7 Keypad
2 137250 1 Phase 7 Ribbon Cable
3 137270 1 Large Character Display
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 153010 4 #6 Star Washer
6 887012 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. as of January 22, 2004)
887009 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. prior to January 22, 2004)
7 818482 1 Black Control Panel
8 ––––––* 1 Logo ONLY
9 818206 1 Magnetic Switch
* Contact reseller for logo.
450599-2 www.amdry.com 5
Phase 7.5 Non-Coin Top Panel Assembly
ForTop Control Models
Illus. No. Part No. Qty.Description
1 112580 1 Phase 7.5 Non-Coin Keypad
2 153010 3 #6 Star Washer
3 150005 3 #6-32 x 1/4” Phillips Round Head Machine Screw
4 887020 1 Phase 7.5 Non-Coin Board with a Fire Suppression System
5 818463 1 Non-Coin Top Control Panel
6 818206 1 Magnetic Switch
6 American Dryer Corporation 450599-2
Front Panel Assemblies
Illus. No. Part No. Qty.Description
1 818478 1 Top Control Panel for Bottom Controls
2 ––––––* – Logo ONLY
3 818466 1 Front Bottom Panel Assembly for Top Controls
* Contact reseller for logo.
450599-2 www.amdry.com 7
Phase 7.5 Non-Coin Bottom Panel Assembly
ForBottomControlModels
Illus. No. Part No. Qty.Description
1 112580 1 Phase 7.5 Non-Coin Keypad
2 887020 1 Phase 7.5 Non-Coin Board with a Fire Suppression System
3 153010 3 #6 Star Washer
4 150005 3 #6-32 x 1/4” Phillips Round Head Machine Screw
5 818465 1 Phase 7.5 Non-Coin Bottom Control Panel
8 American Dryer Corporation 450599-2
Phase 7.3 Non-Coin Bottom Panel Assembly
ForBottomControlModels
Illus. No. Part No. Qty.Description
1 112579 1 Phase 7.3 Keypad
2 137270 1 Large Character Display
3 818436 1 Non-Coin Bottom Control Panel
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 153010 4 #6 Star Washer
6 887012 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. as of January 22, 2004)
887009 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. prior to January 22, 2004)
7 137250 1 Ribbon Cable
450599-2 www.amdry.com 9
Phase 7.3 Coin Top Panel Assembly
ForTop Control Models
Illus. No. Part No. Qty.Description
1 137270 1 Large Character Display
2 883774 1 Optic Switch
3 153010 4 #6 Star Washer
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 112579 1 Phase 7.3 Coin Keypad
6 137250 1 Phase 7.3 Ribbon Cable
7 887011 1 Phase 7.3.2 Board without a Fire Suppression System
(for models mfd. as of January 22, 2004)
887012 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. as of January 22, 2004)
887009 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. prior to January 22, 2004)
8 884029 1 25¢ US Optic Coin Acceptor
9 818467 1 Black Control Panel
10 818132 1 Coin Vault for Top Control
11 818206 1 Magnetic Switch
12 818500 1 Coin Vault Bracket
13 150511 1 1/4-20 x 1” Tap Bolt
14 150300 4 #10-16 x 1/2” Hex Washer TEK Screw
15 153000 8 #8 Flat Washer
16 153012 8 #8 Star Washer
17 152015 8 #8-32 Hex Nut
10 American Dryer Corporation 450599-2
Phase 7.3 Coin Bottom Panel Assembly
ForBottomControlModels
Illus. No. Part No. Qty.Description
1 137270 1 Large Character Display
2 883774 1 Optic Switch
3 153010 4 #6 Star Washer
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 112579 1 Phase 7.3 Coin Keypad
6 137250 1 Phase 7.3 Ribbon Cable
7 887011 1 Phase 7.3.2 Board without a Fire Suppression System
(for models mfd. as of January 22, 2004)
887012 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. as of January 22, 2004)
887009 1 Phase 7.3.2 Board with a Fire Suppression System
(for models mfd. prior to January 22, 2004)
8 884029 1 25¢ US Optic Coin Acceptor
9 818424 1 Black Control Panel
10 818422 1 Coin Vault for Bottom Control
11 153049 2 13/64” x 7/8” Flat Washer
12 153024 2 #10 Lock Washer
13 152015 2 #8 Hex Nut
14 153049 2 13/64” x 7/8” Flat Washer
15 153012 8 #8 Star Washer
16 152015 8 #8-32 Hex Nut
Other manuals for SL20 Gen II
1
This manual suits for next models
1
Table of contents
Other ADC Dryer manuals
Popular Dryer manuals by other brands
Bosch
Bosch WTA79200GB Installation and operating instructions
Amana
Amana W10233410A Use and care guide
Miele
Miele TWH 780 WP operating instructions
Asko
Asko T760 user guide
Alliance Laundry Systems
Alliance Laundry Systems 25 Series Original instructions
Bosch
Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions
Indesit
Indesit IDV 75 instruction manual
Infiniton
Infiniton SD-DG85C manual
BOMANN
BOMANN WT 5019 instruction manual
Alliance Laundry Systems
Alliance Laundry Systems TMB795C Installation
Asko
Asko T793C operating instructions
Kenmore
Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions