ActivTek EAGLE 5000 User manual

CAUTION: Read manual carefully for proper procedures and operation.

Does not meet California requirements; cannot be shipped to California.

OWNER’S MANUAL

• Application

• Notable Features

• Specifications

• Installation

• Operation

• Maintenance

• Warranty

EAGLE

5000

ELECTRONIC AIR PURIFICATION SYSTEM

100, 120, 220, and 240 volt Systems

Please record the name and phone of your activTek Dealer:

Name______________________________________________________________________

Phone _____________________________________________________________________

Please record the serial number of your Eagle 5000:

Serial # ____________________________________________________________________

Specifications .........................................................................3

Introduction...........................................................................4

Features...............................................................................4

Applications...........................................................................4

Installation ............................................................................5

Lint Screen & Carbon Filter Removal ...................................................6

Purification Plate Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Carbon Filter Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Lint Screen Installation ................................................................8

Placing the Unit .......................................................................9

Settings and Adjustments ............................................................10

Maintenance ........................................................................11

Changing the Fuse ...................................................................12

Troubleshooting .....................................................................12

Warranty Information ................................................................14

CONTENTS

CAUTION! -

To reduce the risk of electric shock, this equipment has a grounding

type plug that has a third (grounding) pin. This plug will only fit into a grounding

type power outlet. If the plug does not fit into the outlet, contact qualified

personnel to install the proper outlet. Do not alter the plug in any way.

WARNING! - Do not operate this unit without one or all purification plate(s)

properly installed. Doing so may void the warranty.

CAUTION! - Disconnect power cord before servicing.

100 and 120 volt models - use 1.6 Amp slow blow fuse.

220 and 240 volt models - use 0.5 Amp slow blow fuse.

Location for Protective Earth Line.

SPECIFICATIONS

Features:

• Positive/Negative Ion Generation Technology.

• Adjustable Ozone Generation.

• Activated Charcoal Deodorization.

• Adjustable fan speed control.

• Washable permanent lint screen.

• Adjustable ozone control and plate configuration.

• Adjustable ion control.

Electrical:

• 100 volt 50/60hz, 120 volt 60hz, 230 volt 50/60 hz, or 240 volt 50 hz.

•

Less than 60 watts power consumption.

•

24 to 30 KV, 20-30 khz ion generation pulsator.

• 20 KV negative ion generator.

Mechanical:

• 82 CFM

Size:

• Dimensions: 15.5” high x 12” wide x 12.75” deep

• Weight: 35 pounds

Ozone Output:

• 140-430 mg per hour (depending on the number of plates installed).

Nature cleanses the air with lightning and rain. Lightning bolts produce ozone, as well as

positive and negative ions, which cleanse the air naturally. Rain helps bring the ozone and

ions closer to the earth's surface. They are then attracted to atmospheric contaminants

that are either removed from the air and attached to grounded objects or are oxidized.

The Eagle 5000 reproduces the natural conditions found in the outdoors. It is not

designed to create an artificial environment. The reestablishment of a natural

environment takes place out in the air, rather than inside the unit. It cleanses the air,

rather than filtering it, masking the symptoms, or attempting to dilute it.

INTRODUCTION

• Compact

• Portable

• No Ductwork Required

• No Chemicals

• Low Maintenance

• Low Electrical Usage

• Complete User Control

• No Residual Contamination

FEATURES

APPLICATIONS

• Restaurants

• Smoking Areas

• Produce Areas

• Basements

• Veterinary Offices

• Casinos

• Large Meeting Halls

• Kennels

• Stables & Barns

• Photo Labs

• Salons

• Day Care Centers

• Chemical Odors

• Bowling Alleys

• Bingo Parlors

1. Remove unit from shipping carton.

2. Remove all protective materials.

3. Check for shipping damage and loose or broken parts.

4. Read owner's manual thoroughly prior to installation.

5. Remove purification plates from the box and install (page 7).

6. Install the internal carbon filter (page 8).

7. Install the rear lint screen (bottom of page 8).

8. Fully insert cord into the power cord receptacle on the back of the unit.

9. Determine placement location for the unit (page 9), plug the unit into a 100 volt, 120

volt, 220 volt, or 240 volt (depending on model) outlet, be sure the power switch is on,

and adjust controls according to the application.

INSTALLATION

Lint

Screen

Ozone Control

Fan Control

Front Grill

Power Switch/

Fuse/Power Cord

Receptacle

Ion Control Power Indicator Lamp

LINT SCREEN & CARBON FILTER REMOVAL

ION

POSITIVE FAN

POWER

1. Unplug the Eagle 5000 to prevent electric shock.

2. Remove only one screw from each of the 2 top corner

brackets and rotate bracket out of the way.

3. Remove 2 screws from bottom of lint screen.

4. Pull top of lint screen toward you,

then lift out.

5. Once the lint screen is removed, the carbon filter may

be removed also.

6. Using the plastic tab, pull the top of the carbon filter

towards you.

7. Pull the carbon filter out of the unit.

PURIFICATION PLATE INSTALLATION

1. Remove the rear lint screen and the internal carbon filter (see page 6).

2. After determining the square footage (use the formula SQUARE FEET

= LENGTH X WIDTH) use the Purifier Setting chart (below or on the

faceplate of the unit) to determine the correct number of plates to

install.

3. Fully insert the needed purification plates (a,b,c) between the guide-

grooves in the sides of the plate cage (between the posts and clips)

making sure the metal clip on each side of the plate is in contact with

the metal screen on the plate.

4. Replace the carbon filter and reinstall the rear lint screen (page 8).

* Chart refers to heavily contaminated areas

3. Insert 2 screws at bottom of lint screen

(do not overtighten screws).

CARBON FILTER INSTALLATION

LINT SCREEN INSTALLATION

1. Always install carbon filter bottom

first.

2. Once the bottom of the filter is in place,

insert the top of the filter into the case.

3. When properly

installed, the carbon

filter fits against the internal

stops located on the left and right insides of the case.

Carbon filter stop

1. Always install lint screen bottom first.

Safety Switch

4. Fit top of lint screen into cabinet,

rotate 2 corner brackets and secure

with screws.

2. The bottom of the lint screen should

depress the safety switch arm towards

the bottom of unit.

Place the unit as high as possible (5-6 feet

min) to ensure complete purification. Do

not turn the unit directly towards a wall or

the ceiling.

If raised placement is not available, place

unit as high as possible and elevate the

front of unit. Some pollutants such as smoke

will rise and the unit, when elevated, can

oxidize the pollutants more effectively. A

ceiling fan can also aid in distribution of

cleansing properties.

The Eagle 5000 is most effective when

placed in a position that allows the ions and

ozone to be mixed evenly and thoroughly

with the polluted air.

Suggested locations, listed in the order of preference:

1. Nearest the source of the worst pollution.

2. Near a cold air return to thoroughly circulate clean air throughout the area.

3. In the area most heavily used to achieve maximum benefit.

Note:

• For maximum control, the unit should be placed where easy access to the controls is

possible.

• The rear of the unit should always have at least one inch of open area to allow

unrestricted airflow.

• Be sure power cord is not accessible to small children to prevent injury.

Caution: This unit should never be placed where it can blow directly into the face of any person

or pet.

PLACING THE UNIT

1. FAN CONTROL

The disbursement of cleansing properties is best accomplished with good air circulation.

The fan control should be set as high as reasonably possible without creating an

undesirable noise level. This will be determined by personal preference and the distance

you wish the cleansing properties to be dispersed.

Note: A ceiling fan can also aid in distribution of cleansing properties.

2. PURIFIER CONTROL

PURIFIER Control: Set the control at the nine o'clock position for one hour.

Adjust the control up or down after one hour based on the following criteria:

1. In normal conditions, it is not necessary to turn the PURIFIER control indicator above

the area of the environment. (refer to purifier chart on page 7)

2. Keeping in mind the previous statement (#1), adjust the purifier so that the scent of

ozone fades into the background 15-30 seconds after entering the environment.

3. AWAY MODE FEATURE

For maximum effectiveness in reducing air contaminants, turn the unit on high for 3-4

hours.

Air out room by opening doors and/or windows.

4. ION CONTROL

The normal setting of a DC ionizer is full negative. This

setting seems to work best in removing particulate

(cigarette smoke) as well as reducing static. When

trying to reduce static, if the full negative setting

results in more static, turn the ion control in small

increments towards the positive until the static is

relieved.

Purifier Control Fan Control

Ion Control

SETTINGS AND ADJUSTMENTS

Caution: Always be sure a room or area is

UNOCCUPIED before performing the above

described Away Mode procedure.

Table of contents

Other activTek Air Cleaner manuals

Popular Air Cleaner manuals by other brands

IKEA

IKEA UPPÅTVIND quick start guide

Nash

Nash AP-1 PureSmart instruction manual

LG PH-U450 Series owner's manual

DeLonghi

DeLonghi DDSX 220WFA manual

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E instruction manual

Sharp

Sharp FU-40SE Operation manual

Philips

Philips AC2721 user manual

Hitachi

Hitachi EP-A3000 instruction manual

TruSens

TruSens Z-2000 manual

Motorola

Motorola MBP87SN quick start guide

Beko

Beko ATP 7100I instruction manual

Carrier

Carrier INFINITY 1620 installation instructions

AtmosAir

AtmosAir P2002 user guide

Winix

Winix NK300 Use & care guide

Friedrich

Friedrich C-90A Service information

Surgically Clean Air

Surgically Clean Air JADE2.0 Operation manual

Base aire

Base aire 555 Pro Installation & operation manual

Champion

Champion CP25 instructions

activTek EAGLE 5000 User manual

Popular Air Cleaner manuals by other brands