Acnodes FPC-8057 User manual

FPC-8057

5.7” STN LCD, Xscale-based touch screen

computer

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. Acnodes Corp. assumes no responsibility for any infringements of patents or

other rights of third parties which may result from its use.

Acnodes Corp assumes no responsibility for any inaccuracies that may be contained in

this document. Acnodes Corp makes no commitment to update or to keep current the

information contained in this manual.

Acnodes Corp reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of Acnodes Corp.

reserved.

June. 2004,

Edition V1.10

ESD Precautions

Integrated circuits on computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge, observe the following

precautions:

• Do not remove boards or integrated circuits from their anti-static

packaging until you are ready to install them.

• Before handling a board or integrated circuit, touch an unpainted

portion of the system unit chassis for a few seconds. This helps to

discharge any static electricity on your body.

• Wear a wrist-grounding strap, available from most electronic component

stores, when handling boards and components.

Trademarks Acknowledgments

Acnodes Corp is a trademark of Acnodes Co., Ltd.

IBM is a registered trademark of International Business

Machines Corporation.

MS-DOS, Microsoft C and QuickBasic are trademarks of

Microsoft Corporation.

TURBO C is a trademark of Borland Inc. BASIC is

a trademark of Dartmouth College. Intel is a

trademark of Intel Corporation.

Other brand names and trademarks are the properties

and registered brands of their respective owners.

iii

Unpacking

The FPC-8057 is packed in an anti-static bag. The product has components that

are easily damaged by static electricity. Do not remove the anti-static wrapping until

proper precautions have been taken. Safety instructions in front of this User’s

Manual describe anti-static precautions and procedures.

After unpacking the product, place it on a raised surface and carefully inspect the

board for any damage that might have occurred during shipment. Ground the

product and exercise extreme care to prevent damage to the product from static

electricity.

Integrated circuits will sometimes come out of their sockets during shipment. The

FPC-8057 5.7” STN LCD, Xscale-based touch screen computer package

includes the following:

• FPC-8057 * 1

• Driver CD *1

• USB sync. cable *1

• Touch pen * 1

• Fuse * 1

• Panel mount * 2

Make sure that all of the items listed above are present.

What To Do If There Is A Problem

If there are damaged or missing parts, contact your supplier and/or dealer

immediately. Do not attempt to apply power to the product if there is damage to any

of its components.

Safety Instructions

Overview

This section states the safety instructions, which must be followed when installing,

operating and servicing the FPC-8057. If neglected, physical injury and death may

follow, or damage may occur to controller and related equipment. The material in

this chapter must be studied before attempting any work on, or with, the unit.

Warnings and Notes

This manual distinguishes safety instructions. Warnings are used to inform of

conditions, which can, if proper steps are not taken, lead to a serious fault

condition, physical injury or death. Notes are used when the reader is required to

pay special attention or when there is additional information available on the

subject. Notes are less crucial than warnings, but should not be disregarded.

Readers are informed of situations that can result in serious

physical injury and/or serious damage to equipment with the

symbol shown to the left. A Warning symbol indicates that the

reader should pay special attention to the accompanying text.

Precautionary steps should be taken to insure that the

installation is in compliance with warnings. Warnings include

hazardous conditions that could cause personal injury or

equipment damage if care is not taken. The text next to this

symbol describes ways to avoid the danger.

Warnings

Warnings Dangerous Voltage Warnings: Warns of situations in

which high voltage can cause physical injury and or

damage equipment.

General warning: Warns of situations, which can cause

physical injury and or damage equipment by means other than

electrical.

Electrostatic Discharge Warning: Warns of situations in

which an electrostatic discharge can damage equipment.

Readers are notified of the need for special attention or additional in formation

available on the subject with the following symbols:

CAUTION! Aims to draw special attention to it.

Note: Note: gives additional information or points out more

information available on the subject.

Table of Contents

Disclaimers --------------------------------------------------------ii

ESD Precautions --------------------------------------------------iii

Unpacking ---------------------------------------------------------iv

Safety Instructions ------------------------------------------------ v

Chapter 1 Introduction-------------------------------------------- 1

1.1 General Description .........................................................1

1.2 Features ...........................................................................2

1.3 Specifications ...................................................................2

Chapter 2 Installation Instructions ---------------------------- 5

2.1 Mounting Instructions .....................................................5

2.1.1 Location Considerations ......................................... 5

2.1.2 Making a NEMA-4 Mounting .................................. 5

2.1.3 Environmental Considerations .............................. 7

2.2 Power Connections ............................................................ 8

2.2.1 Power Requirements ......................................................9

2.2.2 Grounding Requirements ..........................................11

2.2.3 CE Requirements ........................................................ 12

2.2.4 Safety Guidelines ......................................................... 12

2.3 Communications Connections ..................................... 14

2.3.1 COM 1 [RS-232] ........................................................14

2.3.2 COM2 [RS-232] & COM3 [RS-422/485] ................16

2.3.3 Dip Switch ..................................................................17

Table of Contents vii

2.4 CE Requirements .......................................................... 18

2.5 Dimensions of FPC-8057 ............................................. 19

Chapter 3 Windows CE.NET ------------------------------ 21

3.1 Introduction ............................................................... 21

3.2 Utilities ....................................................................... 22

3.2.1 Soft-Keyboard ......................................................... 22

3.2.2 System Settings ....................................................... 23

3.2.3 IPSM ............................................................................ 26

3.2.4 Startup ........................................................................ 27

3.2.5 Remote Desktop Connection (Windows XP

only) ....................................................................... 28

3.3 FPC-8057 Networking .................................................. 31

3.3.1 Networking via Ethernet ....................................... 31

3.3.2 Networking via USB Client Port ........................... 32

3.3.3 Web browser ........................................................... 34

3.4 Application program development ............................... 35

3.4.1 Microsoft eMbedded Visual C++ 4.0 ................ 35

3.4.2 FPC-8057 SDK............................................................ 37

Appendix A Example --------------------------------------- 39

Appendix B How to Update WindowsCE image ------- 41

Appendix C How to use development tools-eMbedded

C++4.0--- 43

Table of Contents

FPC-8057 User’s Manual

Chapter 1

Introduction

1.1 General Description

The FPC-8057 series are fan-less and compact-size touch panel

computers. It equips with 5.7” STN LCD display, Windows CE.NET and

low power consumption CPU, Intel Xscale PXA255. Therefore, FPC-

8057 series are good cost-effective choices for operator interface

applications.

The FPC-8057 adopts most reliable and stable design. With fan-less CPU

and CompactFlash card, FPC-8057 is especially suitable for vibration

environment such as transportation, semiconductor etc. In addition, FPC-

8057 is also bundled with Windows CE.NET, which forms a bridge that lets

FPC-8057 be an open HMI solution for system integration. For connecting

other devices, the FPC-8057 also provides several interfaces: RS-

232/422/485, Ethernet etc.

Introduction

FPC-8057 User’s Manual

1.2 Features

zFan-less and low power consumption CPU- Xscale PXA255 z

5.7” QVGA color STN LCD

z Windows CE.NET supported and flash ROM on-board z

Slim and compact size design

z Suitable for reliable and vibration application – Fan less and

CompactFlash card

z NEMA 4 / IP65 compliant front panel z

Support Compact Framework

z Over-voltage power protection – fuse

1.3 Specifications

zConstruction: plastic molding housing

z Display: 5.7" QVGA Color STN LCD

z CPU and core logic: Intel™Xscale PXA255 z

Flash ROM/SDRAM on board

32 MB Flash ROM / 64MB SDRAM z

1 CompactFlash™card slot z I/O: 2

serial ports

COM1: RS-232, COM2: RS-232/422/485 z

1 Ethernet port (10Base-T) z 2 USB host ports

z 1 USB client for ActiveSync

z Sound output: 16 bit sound output z

RTC: Dallas DS1685

z Power input: 24 VDC, 0.5A maximum

z Dimension (W x H x D): 204 x 150 x 48mm z

Weight: 1.0kg

2 Introduction

Other manuals for FPC-8057

Table of contents

Other Acnodes Desktop manuals

Acnodes

Acnodes RMC 5210A User manual

Acnodes

Acnodes RMC 8310A User manual

Acnodes

Acnodes RMC 6125A User manual

Acnodes

Acnodes FES 9000 User manual

Acnodes

Acnodes RMC 6220A User manual

Acnodes

Acnodes LW 6104 User manual

Acnodes

Acnodes LW 6120 User manual

Acnodes

Acnodes RMC 6343A User manual

Acnodes

Acnodes RMC 6121B User manual

Acnodes

Acnodes RMC 6446B User manual

Acnodes

Acnodes LW 910 User manual

Acnodes

Acnodes RMC 6015A User manual

Acnodes

Acnodes RMC 3072A User manual

Acnodes

Acnodes LW 846 User manual

Acnodes

Acnodes RMC8416 User manual

Acnodes

Acnodes FPC 8121 User manual

Acnodes

Acnodes FPC 8084 User manual

Acnodes

Acnodes RMC 6224A User manual

Acnodes

Acnodes FES93 Series User manual

Acnodes

Acnodes FES 8000 User manual

Acnodes

Acnodes PLW 8150 User manual

Acnodes

Acnodes RMC 6220B User manual

Acnodes

Acnodes LW 922 User manual

Acnodes

Acnodes RMC 8414A User manual

Popular Desktop manuals by other brands

HP m9060n - Pavilion - Elite Quick setup

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

HP Presario SV7000 - Desktop PC manual

HP ProDesk 400 G5 Maintenance and service guide

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual