ACME LED-245/2 User manual

1A

LED effect lighting

USER MANUAL

Please read this user manual carefully and follow the instructions to avoid danger or damage to

the unit due to mishandling.

A. Thank you for purchasing our LED effect lighting, We guarantee your

satisfaction in having acquired this lighting product.

B. Safety Introductions

yPlease keep this User Manual for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

yUnpack and check carefully there is no transportation damage before using the unit.

yBefore operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

yIt’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

yThe unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces. Be sure that no ventilation slots are blocked.

yDisconnect mains power before replacement or servicing.

yReplace only with the same type.

yMake sure there are not flammable materials close to the unit while operating, as it is fire

hazard.

yUse safety cable when fixes this unit.

yIn the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.

Please contact the nearest authorized technical assistance center and always use the same

type spare parts.

yDo not touch any wire during operation as high voltage might be causing electric shock.

2A

C. Installation

You can install the unit on the truss or ceiling, Use clamps to fix the unit to truss. Always ensure

that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the

structure to which you are attaching the unit is secure. Also always use a safety cable that can

hold 10 times of the weight of the unit when installing the fixture.

D. Troubleshooting

Following are a few common problems that may occur during operation. Here are some

suggestions for easy troubleshooting:

A. The fixture does not work

1. Check the connection of power and main fuse.

2. Measure the mains voltage on the main connector.

B. No response to the sound

1. Check microphone to see if it is good by tapping the microphone.

E. Warnings：

1. Always remember to unplug the unit from the main power before any service is done.

2. There are no user serviceable parts inside.

3. Qualified personnel should do Service only.

4. Do not touch any wires during operation.

5. Do not touch the unit barehanded during operation.

Table of contents

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions