ACME Building wash User manual

CONTENTS

1. Safety Instruction .............................................................................................................................2

2.Techical Specfications........................................................................................................................4

3. How To Set The Fixture ....................................................................................................................6

3.1 Control Panel............................................................................................................................6

3.2 Main Functions.........................................................................................................................7

4. How To Control The Unit................................................................................................................12

4.1 DMX Controller.......................................................................................................................12

4.2 DMX 512 Configuration..........................................................................................................12

5. DMX512 Connections.....................................................................................................................14

6. Troubleshooting .............................................................................................................................15

7. Fixture Cleaning .............................................................................................................................15

1. Safety Instruction

Please keep this User Guide for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

Caution:

All fixtures are intact from the manufacturer, please operate follow up the user manual,

artificial fault are not under guarantee repair.

Unpack and check carefully there is no transportation damage before using the unit.

DO install and operate by operator.

Use safety chain when fixes the unit.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Maximum ambient temperature Ta: 40℃. Don’t operate it where the temperature is higher

than this.

DO NOT connect the device to any dimmer pack.

Make sure there are no flammable materials close to the unit while operating, as it is fire

hazard.

Look over power wires carefully, replace immediately if there is any damage.

Unit surface temperature may reach up to 60℃. DO NOT touch the housing bare-hand during

its operation.

Avoid any inflammable liquids, water or metal objects entering the unit. Once it happen, cut

off the mains power immediately.

DO NOT operate in dirty and dusty environment, also cleaning fixtures regularly.

DO NOT allow children to operate the fixture.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires together arounding other cables.

Please read the instructions carefully which includes important

information about the installation, operation and maintenance.

Replace fuse only with the same type.

In the event of serious operating problem, stop using the unit immediately.

The housing, the lenses must be replaced if they are visibly damaged.

DO NOT open the unit as there are no user serviceable parts inside. Never try to repair the unit

by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center.

Disconnect the mains power if the fixture is not used for a long time.

DO use original packing materials once transport it again.

Installation:

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is

firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to

which you are attaching the unit is secure and is able to support a weight of 10 times of the

unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit

when installing the fixture in the air.

The equipment must be fixed by professionals. And it must be fixed at a place where is out of the

touch of people and has no one pass by or under it.

If using a 230V 50Hz power supply, DO NOT connect in series more than 18 units; use

another main supply for the next 18 fixtures.

If using a 120V 60Hz power supply, DO NOT connect in series more than 9 units; use

another main supply for the next 9 fixtures.

2.Techical Specfications

- New member of Visio architectural lightings, specially designed to replacing the traditional

outdoor 400W discharge fixtures.

- Great heat ventilation and heavy duty design to ensure reliable performance under harsh

environment

- It features 90pcs×3W CREE LEDs provides powerful output

- Various beam angles, ideal for different applications – for the illumination of buildings, bridges,

stadium, landscapes, theme parks and more.

Key Facts:

◇Die-cast housing and thermal control for the reliable performance

◇17000 Lumen Output

◇1 KHz refreshing frequency, flicker-free under HD camera

◇Barn door is available upon request (sold separately)

BW-903 CW AR:

Input Voltage

：

AC 100-240V 50/60Hz

Power Consumption

：

267W

Light Source: 90×3W CREE Cold White LEDs

Beam Angle: 6°, 15°, 25°, 40°, 60°, 80°

Lumen Output: >17000lm

Color Temperature: 5300~5900K

IP Rating: IP66

Weight

：

15.6Kgs

Dimension：385×400×195mm

BW-903 WW AR:

Input Voltage

：

AC 100-240V 50/60Hz

Power Consumption

：

267W

Light Source: 90×3W CREE Warm White LEDs

Beam Angle: 6°, 15°, 25°, 40°, 60°, 80°

Lumen Output: >17300lm

Color Temperature: 2900~3200K

IP Rating: IP66

Weight

：

15.6Kgs

Dimension：385×400×195mm

BW-903 VW AR:

Input Voltage

：

AC 100-240V 50/60Hz

Power Consumption

：

267W

Light Source: 42×3W CREE Warm White and 48×3W Cold White LEDs

Beam Angle: 6°, 15°, 25°, 40°, 60°, 80°

Lumen Output: >17300lm

Color Temperature: 2900~5900K

IP Rating: IP66

Weight

：

15.6Kgs

Dimension：385×400×195mm

3. How To Set The Fixture

3.1 Control Panel

1. Display:

To show the various menus and the selected functions

Button:

2. MENU

To select the programming functions

3. DOWN

To go backward in the selected functions

4. UP

To go forward in the selected functions

5. ENTER

To confirm the selected functions

6. POWER IN:

Water proof connectors for power input

7. POWER OUT:

Water proof connectors for power output

8. DMX IN:

Water proof 3-pin XLR connectors for DMX 512 operation

9. DMX OUT:

Water proof connectors for DMX 512 operation with 3-pin XLR plug

3.2 Main Functions

To select any functions, press the MENU button until the required one is shown on the display.

Select the function by the ENTER button and the display will blink. Use the DOWN and UP button

to change the mode. Once the required mode has been selected, press the ENTER button to setup

or it will automatically return to the main functions without any change after idling one minute.

Back to the functions without any change press the MENU button.

The main functions are shown below:

BW-903 CW AR / BW-903 WW AR:

BW-903VW AR:

DMX 512 Address Setting

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to change the DMX 512 address from 1 to 512. Once the address has been selected, press

the ENTER button to setup or automatically exit menu mode without any change after one minute.

Back to the previous functions without any change press the MENU button.

Channel mode (For BW-903 VW AR only)

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (2 Channels) or (2D channels) Mode. Once select, press

the ENTER button to setup or automatically exit menu mode without any change after one minute.

To go back to the functions without any change press the MENU button.

Color Temperature Adjusting (For BW-903 VW AR only)

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to select the (Cool White) or (Warm White) Mode. Press the ENTER

button to setup and use the DOWN and UP button to adjust the LED brightness between

and . Once select, press the ENTER button to setup or automatically exit menu mode

without any change after one minute. To go back to the functions without any change press the

MENU button.

Manual Dimmer

Select the , press the ENTER button and the display will blink. Use the DOWN and UP

button to adjust the LED brightness value. Once select, press the ENTER button to setup or

automatically exit menu mode without any change after one minute. To go back to the functions

without any change press the MENU button.

Other manuals for Building wash

This manual suits for next models

Table of contents

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions