ABB COM600 series Instruction sheet

COM600 series, Version 4.1

FDIR Configuration Manual

Contents:

1. About this manual .................................................................................. 5

1.1. Copyright ........................................................................................ 5

1.2. Disclaimer ..................................................................................... 5

1.3. Conformity ..................................................................................... 6

1.4. Trademarks .................................................................................... 6

1.5. General .......................................................................................... 6

1.6. Document conventions .................................................................. 6

1.7. Use of symbols .............................................................................. 7

1.8. Terminology .................................................................................... 8

1.9. Abbreviations ................................................................................. 8

1.10. Related documents ........................................................................ 8

1.11. Document revisions ....................................................................... 8

2. Introduction ........................................................................................... 10

2.1. General about the COM600 series .............................................. 10

2.2. Overview of FDIR ......................................................................... 10

3. FDIR configuration ............................................................................... 11

3.1. Building FDIR project on SAB600 ................................................ 11

3.2. FDIR communication structure .................................................... 11

3.3. FDIR single line diagram .............................................................. 13

3.4. FDIR Configuration Tool ............................................................... 15

3.4.1. Launching FDIR Configuration Tool .............................. 15

3.4.2. FDIR Configuration Tool functions ................................ 16

3.4.3. Specifying network settings .......................................... 16

3.4.4. Setting parameters for setting groups ........................... 17

3.4.5. Changing cross references ........................................... 18

3.4.6. Generating FDIR Logic Processor configuration .......... 20

3.4.7. Options .......................................................................... 21

3.5. Downloading FDIR configuration ................................................. 22

3.5.1. Downloading FDIR configuration .................................. 22

3.5.2. Downloading FDIR Logic Processor Project ................. 22

3.5.3. Downloading FDIR SAB600 configuration .................... 23

COM600 series, Version 4.11MRS757278

FDIR Configuration Manual

Issued: 30.6.2011

Version: C/13.3.2015

About this manual1.

Copyright1.1.

This document and parts thereof must not be reproduced or copied without written per-

mission from ABB, and the contents thereof must not be imparted to a third party, nor

used for any unauthorized purpose.

The software or hardware described in this document is furnished under a license and

may be used, copied, or disclosed only in accordance with the terms of such license.

Warranty

Please inquire about the terms of warranty from your nearest ABB representative.

http://www.abb.com/substationautomation

Disclaimer1.2.

The data, examples and diagrams in this manual are included solely for the concept or

product description and are not to be deemed as a statement of guaranteed properties.

All persons responsible for applying the equipment addressed in this manual must satisfy

themselves that each intended application is suitable and acceptable, including that any

applicable safety or other operational requirements are complied with. In particular, any

risks in applications where a system failure and/ or product failure would create a risk

for harm to property or persons (including but not limited to personal injuries or death)

shall be the sole responsibility of the person or entity applying the equipment, and those

so responsible are hereby requested to ensure that all measures are taken to exclude or

mitigate such risks.

This product is designed to be connected and to communicate information and data via

a network interface, which should be connected to a secure network. It is sole responsib-

ility of person or entity responsible for network administration to ensure a secure connec-

tion to the network and to establish and maintain any appropriate measures (such as but

not limited to the installation of firewalls, application of authentication measures,

encryption of data, installation of anti virus programs, etc) to protect the product, the

network, its system and the interface against any kind of security breaches, unauthorized

access, interference, intrusion, leakage and/or theft of data or information. ABB is not

liable for damages and/or losses related to such security breaches, unauthorized access,

interference, intrusion, leakage and/or theft of data or information.

This document has been carefully checked byABB but deviations cannot be completely

ruled out. In case any errors are detected, the reader is kindly requested to notify the

manufacturer. Other than under explicit contractual commitments, in no event shallABB

COM600 series, Version 4.1

1MRS757278

FDIR Configuration Manual

be responsible or liable for any loss or damage resulting from the use of this manual or

the application of the equipment.

Conformity1.3.

This product complies with the directive of the Council of the European Communities

on the approximation of the laws of the Member States relating to electromagnetic

compatibility (EMC Directive 2004/108/EC) and concerning electrical equipment for

use within specified voltage limits (Low-voltage directive 2006/95/EC).This conformity

is the result of tests conducted by ABB in accordance with the product standards EN

50263 and EN 60255-26 for the EMC directive, and with the product standards EN

60255-1 and EN 60255-27 for the low voltage directive. The product is designed in

accordance with the international standards of the IEC 60255 series.

Trademarks1.4.

ABB is a registered trademark ofABB Group. All other brand or product names men-

tioned in this document may be trademarks or registered trademarks of their respective

holders.

General1.5.

This manual provides thorough information on FDIR configuration on StationAutomation

Builder (SAB600) and the central concepts related to it.You find instructions on building

FDIR project on SAB600. Information in this configuration manual is intended for

application engineers who configure the FDIR project communication structure and use

the FDIR configuration tool to set up FDIR.

Document conventions1.6.

The following conventions are used for the presentation of material:

•The words in names of screen elements (for example, the title in the title bar of a

window, the label for a field of a dialog box) are initially capitalized.

•Capital letters are used for the name of a keyboard key if it is labeled on the keyboard.

For example, press the ENTER key.

•Lowercase letters are used for the name of a keyboard key that is not labeled on the

keyboard. For example, the space bar, comma key, and so on.

•Press CTRL+C indicates that you must hold down the CTRL key while pressing

the C key (to copy a selected object in this case).

•Press ESC E C indicates that you press and release each key in sequence (to copy

a selected object in this case).

•The names of push and toggle buttons are boldfaced. For example, click OK.

•The names of menus and menu items are boldfaced. For example, the File menu.

1MRS757278

COM600 series, Version 4.1

FDIR Configuration Manual

•The following convention is used for menu operations: MenuName > Menu-

Item > CascadedMenuItem. For example: select File > New > Type.

•The Start menu name always refers to the Start menu on theWindows taskbar.

•System prompts/messages and user responses/input are shown in the Courier font.

For example, if you enter a value out of range, the following message is displayed:

Entered value is not valid. The value must be 0 - 30 .

•You can be asked to enter the string MIF349 in a field. The string is shown as follows

in the procedure:

MIF349

•Variables are shown using lowercase letters:

sequence name

Use of symbols1.7.

This publication includes warning, caution, and information icons that point out safety-

related conditions or other important information. It also includes tip icons to point out

useful information to the reader. The corresponding icons should be interpreted as follows.

The electrical warning icon indicates the presence of a hazard

which could result in electrical shock.

The warning icon indicates the presence of a hazard which

could result in personal injury.

The caution icon indicates important information or warning

related to the concept discussed in the text. It may indicate

the presence of a hazard which could result in corruption of

software or damage to equipment or property.

The information icon alerts the reader to relevant facts and

conditions.

The tip icon indicates advice on, for example, how to design

your project or how to use a certain function.

COM600 series, Version 4.1

1MRS757278

FDIR Configuration Manual

Terminology1.8.

The following is a list of terms associated with COM600 that you should be familiar

with. The list contains terms that are unique toABB or have a usage or definition that

is different from standard industry usage.

DescriptionTerm

A physical device that behaves as its own communication node

in the network, for example, protection relay.

Device

Change of process data or an OPC internal value. Normally, an

event consists of value, quality, and timestamp.

Event

A physical IEC 61850 device that behaves as its own commu-

nication node in the IEC 61850 protocol.

Intelligent Electronic Device

Series of standards specifications aiming at open connectivity

in industrial automation and the enterprise systems that support

industry.

OPC

Named data item.Property

Abbreviations1.9.

The following is a list of abbreviations associated with COM600 that you should be

familiar with.

DescriptionAbbreviation

Fault detection, fault isolation and load restorationFDIR

Human Machine InterfaceHMI

Intelligent Electronic DeviceIED

Station Automation Builder 600SAB600

Single Line DiagramSLD

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide