ABB Relion 615 series User manual
Relion® 615 series
Voltage Protection and Control
REU615
Modbus Point List Manual
Document ID: 1MRS757057
Issued: 2012-05-11
Revision: B
Product version: 4.0
© Copyright 2012 ABB. All rights reserved
Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third
party, nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or
product names mentioned in this document may be trademarks or registered
trademarks of their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
http://www.abb.com/substationautomation
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept
or product description and are not to be deemed as a statement of guaranteed
properties. All persons responsible for applying the equipment addressed in this
manual must satisfy themselves that each intended application is suitable and
acceptable, including that any applicable safety or other operational requirements
are complied with. In particular, any risks in applications where a system failure and/
or product failure would create a risk for harm to property or persons (including but
not limited to personal injuries or death) shall be the sole responsibility of the
person or entity applying the equipment, and those so responsible are hereby
requested to ensure that all measures are taken to exclude or mitigate such risks.
This document has been carefully checked by ABB but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested
to notify the manufacturer. Other than under explicit contractual commitments, in
no event shall ABB be responsible or liable for any loss or damage resulting from
the use of this manual or the application of the equipment.
Conformity
This product complies with the directive of the Council of the European
Communities on the approximation of the laws of the Member States relating to
electromagnetic compatibility (EMC Directive 2004/108/EC) and concerning
electrical equipment for use within specified voltage limits (Low-voltage directive
2006/95/EC). This conformity is the result of tests conducted by ABB in
accordance with the product standards EN 50263 and EN 60255-26 for the EMC
directive, and with the product standards EN 60255-1 and EN 60255-27 for the low
voltage directive. The product is designed in accordance with the international
standards of the IEC 60255 series.
Table of contents
Section 1 Introduction.......................................................................7
This manual........................................................................................7
Intended audience..............................................................................7
Product documentation.......................................................................7
Product documentation set............................................................7
Document revision history.............................................................8
Related documentation..................................................................8
Symbols and conventions...................................................................9
Symbols.........................................................................................9
Document conventions..................................................................9
Functions, codes and symbols....................................................10
Section 2 Modbus data mappings..................................................13
Overview...........................................................................................13
Supported functions..........................................................................13
Point list for REU615 Ver.4.0 UE01-02............................................15
Indications...................................................................................15
CommonData1.......................................................................15
LD0.LEDPTRC1 Global conditioning.....................................16
LD0.TRPPTRC1 Protection trip conditioning (1)....................16
LD0.TRPPTRC2 Protection trip conditioning (2)....................16
LD0.CMMXU1 Phase current limit supervision (1).................16
LD0.RESVMMXU1 Residual voltage limit supervision
(1)...........................................................................................17
LD0.LEDGGIO1 Indication LED states..................................17
LD0.TCSSCBR1 Trip circuit supervision (1)..........................17
LD0.TCSSCBR2 Trip circuit supervision (2)..........................18
LD0.VMMXU1 Phase voltage limit supervision (1).................18
CTRL.DCSXSWI1 Disconnector 1 mom position...................18
CTRL.DCSXSWI2 Disconnector 2 mom position...................18
CTRL.DCSXSWI3 Disconnector 3 mom position...................19
CTRL.ESSXSWI1 Earth switch 1 mom position.....................19
CTRL.CBCSWI1 Circuit breaker 1 mom position...................19
CTRL.ESSXSWI2 Earth switch 2 mom position.....................19
CTRL.CBCSWI1 Circuit breaker 1 mom+mcd position..........20
CTRL.CBCILO1 Circuit breaker 1 enable signals..................20
CTRL.CBXCBR1 Circuit breaker 1 blocking signals..............20
LD0.LEDPTRC1 Global conditioning - phase
information..............................................................................21
Table of contents
REU615 1
Point List Manual
LD0.PHLPTOC1 Phase overcurrent protection, low
stage (1).................................................................................21
LD0.PHHPTOC1 Phase overcurrent protection, high
stage (1).................................................................................22
LD0.PHIPTOC1 Phase overcurrent protection,
instantaneous stage (1)..........................................................22
LD0.T2PTTR1 Thermal overload protection (1).....................22
LD0.ARCSARC1 Fault arc protection, stage 1.......................23
LD0.ARCSARC2 Fault arc protection, stage 2.......................23
LD0.ARCSARC3 Fault arc protection, stage 3.......................23
LD0.SEQRFUF1 Fuse failure protection................................24
CTRL.CCRDIF1 Current circuit failure detection....................24
LD0.PHPTOV1 Phase overvoltage protection (1)..................24
LD0.PHPTOV2 Phase overvoltage protection (2)..................25
LD0.PHPTOV3 Phase overvoltage protection (3)..................25
LD0.PSPTUV1 Positive-sequence undervoltage
protection (1)..........................................................................25
LD0.PSPTUV2 Positive-sequence undervoltage
protection (2)..........................................................................26
LD0.NSPTOV1 Negative-sequence overvoltage
protection (1)..........................................................................26
LD0.NSPTOV2 Negative-sequence overvoltage
protection (2)..........................................................................27
LD0.PHPTUV1 Phase undervoltage protection (1)................27
LD0.PHPTUV2 Phase undervoltage protection (2)................27
LD0.PHPTUV3 Phase undervoltage protection (3)................28
LD0.ROVPTOV1 Residual overvoltage protection (1)...........28
LD0.ROVPTOV2 Residual overvoltage protection (2)...........29
LD0.ROVPTOV3 Residual overvoltage protection (3)...........29
LD0.SECRSYN1 Synchrocheck (1).......................................29
LD0.OLATCC1 On-load tap changer controller......................29
LD0.FRPFRQ1 Frequency protection (1)...............................30
LD0.FRPFRQ2 Frequency protection (2)...............................31
LD0.FRPFRQ3 Frequency protection (3)...............................31
LD0.FRPFRQ4 Frequency protection (4)...............................32
LD0.FRPFRQ5 Frequency protection (5)...............................32
LD0.FRPFRQ6 Frequency protection (6)...............................33
LD0.LSHDPFRQ1 Load shedding - instance 1......................33
LD0.LSHDPFRQ2 Load shedding - instance 2......................33
LD0.LSHDPFRQ3 Load shedding - instance 3......................34
LD0.LSHDPFRQ4 Load shedding - instance 4......................34
LD0.LSHDPFRQ5 Load shedding - instance 5......................35
LD0.MAPGAPC1 Multipurpose analog protection
function (1).............................................................................35
Table of contents
2REU615
Point List Manual
LD0.MAPGAPC2 Multipurpose analog protection
function (2).............................................................................35
LD0.MAPGAPC3 Multipurpose analog protection
function (3).............................................................................36
LD0.MAPGAPC4 Multipurpose analog protection
function (4).............................................................................36
LD0.MAPGAPC5 Multipurpose analog protection
function (5).............................................................................36
LD0.MAPGAPC6 Multipurpose analog protection
function (6).............................................................................36
LD0.XGGIO130 Physical I/O states (BIO card X130) ...........37
CTRL.DCXSWI1 Controllable discon. 1 mom position
data........................................................................................37
CTRL.DCXSWI2 Controllable discon. 2 mom position
data........................................................................................38
CTRL.ESXSWI1 Controllable earth switch 1 mom
position...................................................................................38
LD0.XGGIO130 Physical I/O states (BIO card X130) ...........39
LD0.XGGIO110 Physical I/O states (BIO card X110)............39
LD0.XGGIO100 Physical I/O states (PSM card X100)...........40
LD0.XAGGIO130 Physical I/O states (AIM card XA130).......41
LD0.MVGAPC1 Multipurpose binary inputs (1)......................41
LD0.MVGAPC2 Multipurpose binary inputs (2)......................42
LD0.SPCGGIO2 Multipurpose binary output states (2)..........42
Registers.....................................................................................43
User definable registers [Alt.1], visible on 3x and 4x..............44
User definable bits [Alt.2], visible on 0x,1x,3x and 4x............44
SSR1 System status register 1 - device health......................44
SSR2 System status register 2 - IED mode and state...........45
SSR3 System status register 3 - data available 1 (client-
dependent).............................................................................46
SSR4 System status register 4 - data available 2 (client-
dependent - user-definable)...................................................46
SSR5 System status register 5 - device alive register...........47
SSR6 System status register 6 - control command
status (client-dependent)........................................................47
LD0.CMMXU1 Phase current measurements (1) ..................48
LD0.RESVMMXU1 Residual voltage measurement (1) ........48
LD0.CMSQI1 Sequence of current measurements (1) .........48
LD0.T2PTTR1 Thermal protection values (2) .......................48
LD0.VMMXU1 Voltage measurements (1) ............................49
LD0.VMSQI1 Sequence of voltage measurements (1) .........49
LD0.PEMMXU1 Three-phase power measurements.............49
LD0.TPOSSLTC1 Tap changer position................................50
LD0.FMMXU1 Frequency measurement................................50
Table of contents
REU615 3
Point List Manual
LD0.SECRSYN1 Synchrocheck.............................................50
Indication bits mirrored in registers........................................50
LD0.PEMSTA1 Power measurement demand values
(1) ..........................................................................................50
LD0.VMSTA1 Voltage demand values (1) ............................51
LD0.RESVMSTA1 Residual voltage demand value (1) ........52
LD0.CMSTA1 Phase current demand values (1) ..................52
CTRL.CBCSWI1 Circuit breaker operation counter (1) .........53
LD0.ARCSARCx1 Fault arc counters ....................................53
LD0.XRGGIO130 RTD input values.......................................54
LD0.PEMMTR1 Three-phase energy measurements............54
System diagnostic values.......................................................55
LD0.OLATCC1 Tap changer control and status.....................55
Control structure 1..................................................................55
Control structure 2..................................................................56
Control structure 3..................................................................56
Control structure 4..................................................................56
Control structure 5..................................................................56
Control structure 6..................................................................57
Control structure 7..................................................................57
Control structure 8..................................................................57
Device ID string......................................................................57
IED Real-time clock (in local time mode) - read and
write (synchronize).................................................................58
IED real-time clock (in UTC time mode) - read and write
(synchronize)..........................................................................58
Time and reason for latest IED reset......................................58
Active parameter setting group - read and write....................59
Event record structure............................................................59
Fault record structure header.................................................63
Fault record data....................................................................64
Controls.......................................................................................65
CTRL.CBCSWI1 Circuit breaker (1) control...........................65
Reset, acknowledge and trigger points (B)............................65
LD0.LPHD1 IED warm reset..................................................66
LD0.LSHDPTRC1 Load shedding (1) controls.......................66
LD0.LSHDPTRC2 Load shedding (2) controls.......................66
LD0.LSHDPTRC3 Load shedding (3) controls.......................67
LD0.LSHDPTRC4 Load shedding (4) controls.......................67
LD0.LSHDPTRC5 Load shedding (5) controls.......................67
LD0.SRGAPC1 Reset SRGAPC1 generic flip-flops...............67
LD0.SRGAPC2 Reset SRGAPC2 generic flip-flops...............68
LD0.SPCGGIO1 Multipurpose binary outputs (1) .................68
LD0.SPCGGIO2 Multipurpose binary outputs (2) .................69
Table of contents
4REU615
Point List Manual
Other manuals for Relion 615 series
41
This manual suits for next models
1
Table of contents
Other ABB Control Unit manuals
ABB
ABB Ability 800xA Series Instruction Manual
ABB
ABB jokab safety Smile Tina Series User manual
ABB
ABB COM600 series User manual
ABB
ABB OHDI-01 User manual
ABB
ABB Welcome M2306 User manual
ABB
ABB ControlNet FCNA-01 Installation manual
ABB
ABB M4M Instruction Manual
ABB
ABB FPTC-02 User manual
ABB
ABB CMS-660 User manual
ABB
ABB ACS880-1604LC User manual
ABB
ABB COMMANDER 300 User manual
ABB
ABB RTU500 series User manual
ABB
ABB COM600 series User manual
ABB
ABB EAN823 User manual
ABB
ABB Relion SAM600-IO User manual
ABB
ABB ACS850 series User guide
ABB
ABB Relion 630 Series Instructions for use
ABB
ABB AI111.0 User manual
ABB
ABB ACS850 series User manual
ABB
ABB Relion REC670 Instructions for use
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
