Aaeon FES-6110 User manual

Flexible Embedded

System FES-6110

FES-6110

Flexible Embedded System

2.5” SATA Hard Disk Drive Bay

1 Gigabit Ethernet/

1 COM/ 6 USB2.0

HD Audio Codec (2CH Audio)

FES-6110 Manual 2nd Ed.

February 2012

Flexible Embedded FES-6110

System

This document is copyrighted, 2012. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result

from its use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information

contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

Flexible Embedded FES-6110

System

Acknowledgments

All other products’ name or trademarks are properties of their

respective owners.

Award is a trademark of Award Software International, Inc.

CompactFlash™is a trademark of the Compact Flash

Association.

Microsoft Windows®is a registered trademark of Microsoft

Corp.

Intel®, Atom™ are trademarks of Intel Corporation.

PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

All other product names or trademarks are properties of their

respective owners.

Flexible Embedded FES-6110

System

iii

Packing List

Before you begin operating your PC, please make sure that the

following materials are enclosed:

1 FES-6110

1 CD-ROM for manual (in PDF format) and drivers

1 60W AC-DC Power Adapter

1 Wallmount Kit

If any of these items should be missing or damaged, please contact

your distributor or sales representative immediately.

Flexible Embedded FES-6110

System

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from anyAC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near

the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a firm surface during installation. Dropping

it or letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or

electrical shock.

13. Never open the equipment. For safety reasons, only qualified

service personnel should open the equipment.

14. If any of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

Flexible Embedded FES-6110

System

d. The equipment does not work well, or you cannot get it

to work according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE IS BELOW -20°C

(-4°F) OR ABOVE 65°C (149°F). IT MAY DAMAGE THE

EQUIPMENT.

FCC

This device complies with Part 15 FCC Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received including

interference that may cause undesired

operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the

manufacturer’s instructions and your local government’s recycling or

disposal directives.

Flexible Embedded FES-6110

System

Below Table for China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Boxer/ Industrial System

有毒有害物质或元素

部件名称铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件 ×○○○○○

外部信号

连接器及线材 ×○○○○○

外壳 ×○○○○○

中央处理器

与内存 ×○○○○○

硬盘 ×○○○○○

电源 ×○○○○○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Flexible Embedded FES-6110

System

vii

Contents

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Features....................................................................1-3

1.3 Specifications............................................................1-4

1.4 General System Information .....................................1-6

Chapter 2 Hardware Installation

2.1 Location of Jumpers and Connectors .......................2-2

2.2 Mechanical Drawing ................................................2-3

2.3 List of Jumpers ........................................................2-4

2.4 List of Connectors .....................................................2-5

2.5 Setting Jumpers .......................................................2-6

2.6 Clear CMOS (JP1) ...................................................2-7

2.7 LVDS Power Selection (JP3) ....................................2-7

2.8 LVDS Inverter Voltage Selection (JP4).....................2-7

2.9 CFD Voltage 3.3V/5V Selection (JP5) ......................2-7

2.10 Auto Power Selection (JP6) ....................................2-7

2.11 COM1 Port Power/Ring Selection (JP10)...............2-8

2.12 COM2 Port Power/Ring Selection (JP11)...............2-8

2.13 COM2 Port Power Selection (COMV1)...................2-8

2.14 COM1 Port Power Selection (COMV2)...................2-8

2.15 Front Panel Connector (FP1) ................................2-8

2.16 RS-232 Serial Port Connector (COM1, COM3, COM4)

.........................................................................................2-9

Flexible Embedded

System FES-6110

viii

2.17 RS-232/422/485 Serial Port Connector (COM2).....2-9

2.18 LPT Port Connector (LPT1) ....................................2-9

2.19 LVDS Inverter (CN1)...............................................2-10

2.20 LVDS (CN2) ............................................................2-10

2.21 Audio Pin Header (Right Channel) (CN4)...............2-11

2.22 Audio Pin Header (Left Channel) (CN5)..................2-11

2.23 USB Connector (CN6).............................................2-11

2.24 Digital I/O (CN7) (Address: 802h, 803h, 804h).......2-11

2.25 PS/2 Keyboard/Mouse Connector (CN8)................2-12

2.26 SATA Power Connector (PWR1, 2)........................2-12

2.27 Audio Connector (AUDIO1).....................................2-12

2.28 Installing The Hard Disk Drive.................................2-13

Chapter 3 Award BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 Award BIOS Setup....................................................3-3

Chapter 4 Driver Installation

4.1 Installation.................................................................4-3

Appendix A Programming The Watchdog Timer

A.1 Programming ........................................................A-2

A.2 ITE8718 Watchdog Timer Initial Program ............A-5

Appendix B I/O Information

B.1 I/O Address Map....................................................B-2

B.2 Memory Address Map............................................B-3

B.3 IRQ Mapping Chart................................................B-4

B.4 DMA Channel Assignments.……………………….B-4

Flexible Embedded

System FES-6110

Chapter 1 General Information 1- 1

General

Chapter

Information

Table of contents

Other Aaeon Desktop manuals

Popular Desktop manuals by other brands

HP m9060n - Pavilion - Elite Quick setup

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

HP Presario SV7000 - Desktop PC manual

HP ProDesk 400 G5 Maintenance and service guide

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual