ZyXEL Communications Omni.net D User manual

ZyXEL

OTAL

NTERNET

CCESS

OLUTION

omni.net Plus/D

ISDN Terminal Adapter

Quick Start Guide

GUI Configuration Manager l3Way Conference lCall Waiting

Call Forwarding lCall Hold/Retrieve lMultiple Subscriber Number

Advice of Charge lCaller ID Support lQuick Dial lIntercom

omni.net Plus/D Quick Start Guide

Table of Contents

1. Installation_____________________________________________________ 1-1

Front Panel Description ________________________________________________1-1

Back Panel Description and Connections (S/T Interface) ________________________1-4

Connect Your omni.net Plus/D (U interface) to ISDN Line _______________________1-5

Power On and Self Diagnostics___________________________________________1-6

2. Install Windows 95/98/NT Driver (INF file) _________________________ 2-1

Before Installation____________________________________________________2-1

Start Installing INF file ________________________________________________2-2

3. Install ZyXEL ISDN Configuration Manager for Windows 95/98/NT ______ 3-1

4. Setup ZyXEL ISDN Configuration Manager for Windows 3.x ____________ 4-1

Customer Support____________________________________________________ 4-2

omni.net Plus/D Quick Start Guide

1-1

1.Installation

Thank you for choosing ZyXEL ISDN Terminal Adapter (ISDN TA) as your device for

connecting ISDN. This section is designed to guide you through a quick and correct installation

of your new omni.net Plus or omni.net D.

The following graphics are only displayed for the omni.net Plus. However, since the front panel

and back panel of omni.net Plus and omni.net D are almost identical, all installation steps

below can be applied to both of the omni.net Plus and the omni.net D unless specifically noted.

Front Panel Description

LNK

PWR

DTR

CTS

RTS

DSR

Front Panel

Switch

Phone 1 & Phone 2

for omni.net Plus only

omni.net Plus/D Quick Start Guide

1-2

Front Panel LEDs

LED Function Active Description

PWR

Power LED On When the power is turned ON.

LNK

Link LED On

Blinking

When the link with the local ISDN switch is active.

When attempting to make a connection.

B1 Channel On When the B1 channel is established.

B2 Channel On When the B2 channel is established.

Auto-Answer On

Blinking

When your ISDN TA is in Auto Answer mode.

When your TA rings.

Compression On

When Data Compression is being used over one or more

of the B Channels. Compression types are Hi/fn LZS

(formerly Stac) for PPP connections, and V.42bis for

V.120 or X.75 connections.

DTR

Data Terminal

Ready On When the DTE or computer connected to the DTE

port signals that it is ready for communication by

establishing the RS-232 link.

DSR

Data Set

Ready On

When the modem is ready for communication with the

DTE.

RTS Request To Send

When the DTE has datato be sent to the remote modem.

The RTS signal is used in Hardware Handshaking.

CTS Clear To Send

When the modem is ready to receive data from the

remote modem. The CTS signal is used in Hardware

Handshaking.

Transmit Data Blinking When the DTE/Computer transmits data to the

DTE port.

Receive Data On When the DTE/Computer receives data from the

DTE port.

Phone 1

(for omni.net

Plus only)

When the POTS port 1 telephone/handset is off-hook.

Phone 2

(for omni.net

Plus only)

When the POTS port 2 telephone/handset is off-hook.

omni.net Plus/D Quick Start Guide

1-3

Front Panel Switch

When the TA is in command state, pressing the front panel button causes it to dial the default

phone number pre-stored in the NVRAM. The default number pointer to the telephone

directory is assigned by the AT*Dncommand.

When the TA is on-line, pressing the button will tear down the connection and bring it into

command state.

omni.net Plus/D Quick Start Guide

1-4

Back Panel Description and Connections (S/T Interface)

Back Panel Switch and Connectors

ON/OFF

Power ON/OFF switch

POWER Input terminal for power adapter.

To DTE Serial port DB-25 female connector for connection to the serial port of a DTE

(computer/terminal).

ISDN ISDN RJ-45 terminal jack; connects to a S/T interface or a U interface.

PHONE 1 RJ-11 terminal jack for analog adapter 1; for connecting to analog equipment. (phone,

fax, answering machine, etc.)

PHONE 2 RJ-11 terminal jack for analog adapter 2; for connecting to analog equipment. (phone,

fax, answering machine, etc.)

Tel

Fax

Power

Outlet

Power

Adapter

NT-1 Device

To DTE

Power

Input

Power ON/OFF

Switch Phone 2

Phone 1

ISDN

Phone 1 & Phone 2

for omni.net Plus only

Computer

omni.net Plus/D Quick Start Guide

1-5

Connect Your omni.netPlus/D (U interface) to ISDN Line

Connect one end of the RJ-45 connectors to the “ISDN U”jack, and another end to

your wall jack, as the following illustration:

Phone 1 & Phone 2

for omni.net Plus only

omni.net Plus/D Quick Start Guide

1-6

Power On and Self Diagnostics

Once you have completed all of the installation steps above, flip the omni On/Off switch to the

ON (up) position.The unit starts a self-test sequence, where you should see a series of LED

lights blinking (LED, B1, B2, AA). After this cycle is complete, the PWR light should stay on.

If the test routine fails, the LNK LED flashes. Refer to your omni.net Plus/D Technical

Reference for more information on self-tests and error codes.

If you have a communication program loaded and active (connected to the same serial port as

the omni), you should see the DTR LED should be ON after the self-test.

This manual suits for next models

Table of contents

Other ZyXEL Communications Adapter manuals

ZyXEL Communications

ZyXEL Communications PLA4205 User manual

ZyXEL Communications

ZyXEL Communications PLA-402 v3 User manual

ZyXEL Communications

ZyXEL Communications PLA4201 User manual

ZyXEL Communications

ZyXEL Communications AG-220 User manual

ZyXEL Communications

ZyXEL Communications AG-225H User manual

ZyXEL Communications

ZyXEL Communications 802.11g Wireless Ethernet Adapter 1-G-470 User manual

ZyXEL Communications

ZyXEL Communications PLA4205 User manual

ZyXEL Communications

ZyXEL Communications G-202 Reference guide

ZyXEL Communications

ZyXEL Communications G-220 V2 Instruction Manual

ZyXEL Communications

ZyXEL Communications G-210H Instruction Manual

ZyXEL Communications

ZyXEL Communications PLA6456 User manual

ZyXEL Communications

ZyXEL Communications GN-600 Series User manual

ZyXEL Communications

ZyXEL Communications NWD6505 User manual

ZyXEL Communications

ZyXEL Communications AG-225H V2 User manual

ZyXEL Communications

ZyXEL Communications NWD210N User manual

ZyXEL Communications

ZyXEL Communications AG-225H User manual

ZyXEL Communications

ZyXEL Communications Powerline Ethernet Multiplug Center PLA491 User manual

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Instruction Manual

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR 100 User manual

ZyXEL Communications

ZyXEL Communications WM5204Z User manual

ZyXEL Communications

ZyXEL Communications G-220 V2 User manual

ZyXEL Communications

ZyXEL Communications G-220F User manual

ZyXEL Communications

ZyXEL Communications PowerLine PL-100 User manual

ZyXEL Communications

ZyXEL Communications OMNIMPRI Instructions for use

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide

ZyXEL Communications omni.net D User manual

Popular Adapter manuals by other brands