Zte MF65M User manual
1
MF65M
Quick Start Guide
2
Getting to Know Your Device
Appearance
The following gure is for your reference only.
1. LED Indicators
2. Power Key
3. WPS Key
4. Charging/micro-USB Jack
5. (U)SIM Card Slot
6. microSDHC™ Card Slot
NOTE:
microSDHC logo is a trademark of SD-3C, LLC.
3
Getting to Know Your Device
Indicators
When the device is powered on, the following icons may be
lighting. For a description of the icons, refer to the following
table.
Indicator Status Description
Network
Red solid
Error status. Not registered
to the mobile network, no
(U)SIM card inserted or no
network service available.
Green solid Registered to the mobile
network.
Green blinking
Connected to the mobile
network and data is being
transferred.
Wi-Fi
Blue solid Wi-Fi is active.
Blue blinking WPS is active.
off Wi-Fi is off or your device is
in sleep mode.
4
SMS Blue solid You have unread
messages.
Blue blinking You have new messages.
off No unread messages.
Battery
Red solid /
blinking
The battery is low. Please
charge the battery.
Green blinking
The battery is being
charged or in standby
mode.
Green solid The battery level is middle
or high.
off
Your device is not being
charged, or the battery is
not inserted.
Getting to Know Your Device
5
Connection Scenarios
The device can access the Internet in two ways and it
allows multiple clients to surf on the Internet at the same
time. The following gures are for your reference only.
• 3G Mode: A (U)SIM card can be used to access the
Internet.
• Internet Wi-Fi Mode: Your device can be connected to
a WLAN device (such as a hotspot device or wireless
router) through Wi-Fi to access the Internet. The WLAN
device must be already connected to the Internet.
Getting to Know Your Device
6
NOTE: Your device and the WLAN device must be in
different subnets.
Installing Your Device
1. Slide the back cover and remove it.
NOTE: Do not remove the cover rudely.
Getting to Know Your Device
7
2. Install a (U)SIM card to the (U)SIM card slot.
WARNING!
Your device does not support micro-SIM cards, nano-SIM
cards or any other non-standard SIM cards. To avoid dam-
age to the device, do not use those cards or any card hold-
ers.
Installing Your Device
8
3. Install the microSDHC card if necessary.
4. Install the battery.
Installing Your Device
9
5. Close the back cover.
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Make sure your computer or other client devices
have enabled Wi-Fi, and search for available wireless
networks.
NOTE: Refer to your Wi-Fi-enabled client device
manual for further details on how to search for wireless
networks. If you use a computer, you need to set your
computer to obtain an IP address automatically.
Installing Your Device
10
3. Select the Wi-Fi name (SSID) of your device, and click
Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
NOTE:
Refer to the chapter Getting to Know the Wi-Fi SSID and
Password to get the default Wi-Fi SSID and password.
5. Wait until the client device is connected to your device
successfully.
Using a USB Cable
1. Connect a computer to your device with a USB cable.
2. Power on your device. The operating system detects
and identies new hardware, and automatically installs
the hardware.
NOTE: If the system does not automatically launch
installation, you can click the device installation icon in My
Computer to install the software.
3. Wait until the computer is connected to your device
successfully.
Connecting to Your Device
Other manuals for MF65M
5
Table of contents
Other Zte Network Router manuals
Zte
Zte ZXR10 3800-8 Installation instructions
Zte
Zte MC801A User manual
Zte
Zte ZXHN F660 Operating and installation instructions
Zte
Zte MC888 User manual
Zte
Zte MF971V User manual
Zte
Zte MF286R User manual
Zte
Zte ZXR10 3800-8 Installation instructions
Zte
Zte ZXR10 5900E Series User manual
Zte
Zte Avid 4G LTE User manual
Zte
Zte MF93D User manual
