ZMODO ZH-IZV15-WAC User manual
What’s in the Box:
Camera, bracket, power adapter,
screws & anchors, quick start guide
Quick Start Guide
Smart Pan & Tilt Camera
Connect with us!
Like us on
Facebook.com/Zmodo
Solid red
Having difficulty? Please visit our support page for more
instructions,troubleshooting, and other resources:
http://www.zmodo.com/supports
Android is a trademark of Google Inc. Google Play is a trademark of Google Inc.
Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the
U.S. and other countries. App Store is a service mark of Apple Inc.
Solid blue Blinking blue
The camera can't connect to the WiFi. Why?
You may have entered the password incorrectly. Try re-
entering your WiFi password.
You may not have a working internal connection. Check to
see if your router is connected to the Internet. Try
resetting your camera by pressing the reset pinhole on the
bottom of the camera. Hold the button until the light turns
blinking green. Then begin the setup procedure again.
Blinking green
Solid green
The camera is powering
on.
The camera is ready for
SmartLink setup.
The camera has
successfully connected to
the WiFi network.
The camera is connecting
to the WiFi network. Please
do NOT turn off or unplug
the camera.
Follow us on
Twitter @Zmodo
Status Indicator Guide
Set up the camera and find the best mounting location based on
the live view from your smartphone. Make sure that your camera is
within range of your WiFi network.
2Take the PT camera and line it up
to the bracket as shown, using
the provided screws to fasten the
camera to the mounting bracket.
(Screw)
(Bracket)
(Bracket)
3After you’ve attached the bracket to
the camera, slide the bracket onto
the two screws that you inserted
into the wall in Step 1
1Line the camera’s mounting bracket
against the wall and mark the
appropriate holes. Drill two holes
slightly smaller than the wall anchor
and use a hammer to gently insert
the anchors into the wall. Insert the
screws into the anchors.
Mounting the Camera
MeShare App Interface
View captured alarm
snapshots.
Enter the device's live view.
My MeShare Interface
Live view Interface
Pan Tilt Control Interface
Access device settings.
Invite your family or friends
to view the clips of moments.
Rotate the camera by
using the control stick.
Record videos directly
onto your phone. Tap
once to record, and tap
again to stop recording.
5
Capture photos directly
onto your phone.
6
Activate the push-to-
talk function.
7
Enable / disable audio.
8
Change the display
resolution.
Enter the Pan Tilt Control
Interface.
9
5
6 9
10
10
11 11
8
7
Viewing & Recording Options
Local Recording(microSD Card not included)
Record continuous footage by inserting a microSD card (up to
64GB) into the corresponding port on the camera (please see
the diagram on the box).
Note: You will need to format the microSD card in the MeShare app
after inserting it. You can do so through the device settings menu.
Now compatible with MeShare!
We have partnered with MeShare to bring you optional cloud
services! The MeShare Cloud Service (MCS) allows you to:
Visit for more information on www.meshare.com/cloud
plans and features.
Create and save video clips from your recordings.
Access your playback footage and clips from any
location with Internet connection.
Share recorded footage and clips with family and
friends.
Access more smart features in the future!
Record continuously and store the footage on our
secure cloud servers.
MeShare Web App
You can also view your device on any computer using MeShare’s
free web app. Simply use your MeShare username and password
and log in to user.meshare.com.
Camera Setup
Congratulations! We are excited to welcome you to the next
generation of smart technology. Follow the steps below to set
up your camera. To get started, all you need is a smartphone
and WiFi:
1TM ®
Connect your Android phone or iPhone to the WiFi
network that you want your camera to use. Make sure
that you know the password to connect to this network.
System Requirements: Android™ (v.4.0 or newer) or
® ® ®
iPhone , iPad , iPod touch (v.7.0 or newer) ,a
password-protected 2.4GHz WiFi network.
3Log in and press the Add Device option located
on the bottom of the screen, and follow the on-
screen instructions to complete your setup!
Note: Plug the power adapter into the power input
located at the bottom of the camera.
2Download and install the ‘MeShare’ app from Google
TM TM
Play or the App Store . Launch the app and sign up
for a free MeShare account.
MeShare
Other manuals for ZH-IZV15-WAC
1
Table of contents
Other ZMODO Security Camera manuals
ZMODO
ZMODO CM-S12109BK User manual
ZMODO
ZMODO CM-S24326GY-DR User manual
ZMODO
ZMODO CM-S38901SV User manual
ZMODO
ZMODO CM-T1001BG User manual
ZMODO
ZMODO CM-I11123BK User manual
ZMODO
ZMODO CM-S26322BG User manual
ZMODO
ZMODO CM-W3105BK User manual
ZMODO
ZMODO CM-S12306SV User manual
ZMODO
ZMODO CM-S14346PU User manual
ZMODO
ZMODO CM-W3114SV User manual
ZMODO
ZMODO CM-Z2213GY User manual
ZMODO
ZMODO CM-S11103BK User manual
ZMODO
ZMODO CM-P11173BK User manual
ZMODO
ZMODO CM-P21213PU User manual
ZMODO
ZMODO CM-S13209BK User manual
ZMODO
ZMODO CM-S21213PU User manual
ZMODO
ZMODO CM-P12306SV User manual
ZMODO
ZMODO ZP-KB1I04-W User manual
ZMODO
ZMODO CM-P21133BK User manual
ZMODO
ZMODO CM-S23376GY User manual
