ZKTeco UR10RWF User manual
UR10RWF Enroller
QUICK START GUIDE
1.- Product Summary
UR10RW-F are ultra high frequency, readable and writable card emitters that can read and write
data for the user area and EPC area of UHF labels.
Combined with UHF contactless radio frequency circuitry and various encoding and decoding
algorithms, this card issuer can read and write the tags and cards that support the global EPC
UHF Class1 Gen 2 and ISO 18000-6C standard. Its USB interface adopts advanced plug and play
interface without driver core technology to connect computers and other equipment.
The card issuer control chip is provided with a watchdog and voltage detection circuit, and has the
advantage of stable reading performance.
2.- General Information
Enroller
Work Frequency:
902MHz-928Mhz
Reading Range:
20 ~ 40CM
Mini USB port
3.- Technical Data
Model
Supported cards
Work Frequency
Letura distance
Protocol
Communication interface
Support Operation
UR10RWF
UHF Tags, UHF Cards
902MHz-928Mhz
20 ~ 40CM valid distance (determined by environment and
labels)
Global EPC UHF Class1 Gen 2, ISO 18000-6C USB
analog keyboard output
Compatible with US standard UHF reader
DC 5V (± 4%)
50 ~ 300mA
- 10 ° C ~ + 50 ° C
Work Voltage
Work Current
Work temperature
Front View Bottom view and interface
4.- Safety Precautions
The operating voltage of the enroller is 5V, it is recommended to use a mini USB cable and take
the voltage from the USB port of the PC.
5.- Modification of the configuration via Demo
Introduction to Software
Our company offers Demo, which is used to configure the work parameters of the enroller.
The demo interface is as shown below:
UR10RWF
The default reader settings are as follows:
Output power 26 dBm
Frequency 902MHz-928Mhz
Communication interface Wiegand 26
Demo with instructions
Connect the USB port of the reader to the USB port of the computer.
To play the demo on the computer, click "Connect", the right side of the middle will
show "Connected successfully".
RF configuration: Set the RF parameters of the machine, including power and spectrum.
Output power: The power range is 10 ~ 33 dBm.
Frequency: They allow their use in multiple applications and systems. Available for
Global Frequencies 902MHz-928Mhz.
Output Mode: The default Wiegand format is WG26 and can be configured as WG34
and Hex.
Start Byte: The EPC tag has 12-byte data, the first default 3 or 4-byte data, if you set a
byte offset value, the output data will start from the set value.
•
•
•
•
•
•
Reading and writing
The module is used to read and write the EPC card number.
Read & Write EPC Area: To read and write data from the EPC area.
Read & Write EPC User Area: To read and write EPC user data.
ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town, Longgang
District, Shenzhen China 518129
Tel: +86 755-89602345 Fax: +86 755-89602394
www.zkteco.com
Other ZKTeco IP Access Controllers manuals
ZKTeco
ZKTeco RevFace15 User manual
ZKTeco
ZKTeco FA50 User manual
ZKTeco
ZKTeco ProCapture-T User manual
ZKTeco
ZKTeco PA10 User manual
ZKTeco
ZKTeco SCR-100 Plus User manual
ZKTeco
ZKTeco SA40 User manual
ZKTeco
ZKTeco F19 User manual
ZKTeco
ZKTeco F18 User manual
ZKTeco
ZKTeco Green Label ProFace X User manual
ZKTeco
ZKTeco C5S120 Guide
ZKTeco
ZKTeco KF1000 Series User manual
ZKTeco
ZKTeco White LCD Series User manual
ZKTeco
ZKTeco Green Label ProFace X User manual
ZKTeco
ZKTeco ZPad Plus User manual
ZKTeco
ZKTeco OP-200 User manual
ZKTeco
ZKTeco MA500 Troubleshooting guide
ZKTeco
ZKTeco SpeedFace-V3L User manual
ZKTeco
ZKTeco MB20-VL User manual
ZKTeco
ZKTeco BR1200 Series User manual
ZKTeco
ZKTeco Aurora T1 User manual
