
Please follow the below instructions carefully to pair the scanner with
your Mac computer.
Step. 1
Press and hold the trigger for 2 seconds to power on the scanner and
use the barcodes in Setting up the scanner to enable Scanner SPP Slave
mode. Steady blue LED ashing indicates the scanner is wireless ready.
Step. 2
On your Mac computer, go to "System Preference"->"Bluetooth".
Step. 3
Select "On" in the menu to enable Bluetooth function then select "Set Up
New Device" or "+" to begin adding Bluetooth devices.
Connect to Mac OS X via SPP Slave Mode
Connecting to Mac
Step. 4
Select "Any device" then select "Continue" to discover surrounding
Bluetooth devices.
Step. 5
The scanner will appear as "ZBBT". Select "ZBBT" and select
"Continue" to connect the scanner.
Enter the passkey on the computer. The default password is
"12345678" and select "Continue". The scanner should now be paired
to the Mac computer.
Step. 7
Enable COM port using a serial program (such as Serial Tools or
ZTerm) to begin scanning.
Press and hold trigger
Blue flashing 0.5 second interval