Zavio CD5220 User manual

This manual suits for next models

2

Table of contents

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

0

ZAVIO Outdoor IR Dome

Quick Installation Guide

1

Quick Installation Guide

Please follow the installation steps below to set up your IP Camera.

Check the package contents with the list below. See P.1

Physical overview. See P.2

I/O Terminal Block Circuit. See P.3

I/O Terminal Block Pin Definition. See P.3

LED Indicator Definition. See P.4

Installation of hardware and connection of all cables. See P.4

MAC OS: using Safari Browser. See P.7

Z Plus. See P.9

Lighting environment.& Change the Web Interface into your preferred language

See P.11

Package Contents

Camera

IP Camera

Quick Installation Guide

Brief product information and quick installation

Accessory

Alignment Sticker

Screw pack for wall and ceiling mounting

Desiccant

Screw driver

Waterproof connector

Adapter plate

Software

The following software and information are available online:

-Video Management Software

-Z PLUS

-User manuals

-Camera Language Packs

You may download the above at http://www.zavio.com/downloads.php or you

may scan the below QR-Code.

To activate Video Management Software, please contact with Zavio FAE

(techsupport@zavio.com) to get the license key (Please provide camera’s Model

name/Serial number/MAC).

2

Physical overview CD5220/ CD6230/ CD6330

3

I/O Terminal Block Circuit

Note: Please use the supplied waterproof RJ45 connector and seal all connectors tightly to avoid moisture.

I/O Terminal Block Pin Definition

Pin Color

Definition

Description

Max. V/A

Green & White

Audio In Connect the wires of the audio input device to GND

(White) and AUDIO LINE IN (Green). -

White+Green

&

Orange+Black

Audio Out Connect the wires of the audio output device to GND

(Orange+Black) and AUDIO LINE OUT (White+Green).

-

Purple & Black

Alarm In 1 Connect to GND to activate, or leave floating (or

unconnected) to deactivate. 5V DC / 50mA

Red & Black Alarm In 2 Connect to GND to activate, or leave floating (or

unconnected) to deactivate. 5V DC / 50mA

Yellow +

Black & Green

Alarm Out

Relay contact output. Contact capacity with resistance

load.

0.3A at 125V AC

or 1A at 30V DC

Brown + Pink RS-485 - -

4

LED Indicator

LED

Color

Indication

Network

Green

Solid green when network is established.

Orange

Blink orange when there is network activity.

Install the hardware and connect all cables

A. RJ45 waterproof connector

1) Make sure all components are assembled as shown on the below graph.

2) Check that the ethernet port and the waterproof main body are tightly fasten.

3) Please use the supplied waterproof RJ45 connector and seal all connectors

tightly to avoid moisture.

B. Wall and ceiling mounting

(1) Adapter plate (in accessory)

Cover the bubble and seal the camera using the supplied tamper-proof screws.

5

(2) Junction box AZ-J01 (optional accessory)

(3) Wall mount AD-M06 (optional accessory)

6

C. Connect all cables

E1. Without Power over Ethernet (PoE) connection

1. Connect the power adaptor to the IP Camera.

2. Use a standard RJ-45 network cable and connect the IP Camera to a

hub/switch/router.

E2. Power over Ethernet (PoE)

1. Use a standard RJ-45 network cable and connect the IP Camera to a

PoE-enabled hub/switch/router.

D.To adjust the view angle- 3 axis mechanism design

1) Turn the lens module right and left to your desired pan position.

2) Turn the lens module up and down to your desired tilt position.

3) Turn the lens module to adjust the image orientation to satisfied angle.

7

Important:

Make sure the IR LEDs are not blocked by the housing as it will affect the IR performance.

If the image is upside down, please use the image rotate function in Video Setting.

MAC OS using Safari Browser

1. Select Safari Icon

2. Click Bonjour function and select the camera you wish to access.

8

3. Enter name and password to login to the IP camera

(Default is admin / admin)

4. Live video will display in the center of your web browser

9

Z Plus

A. Get the image of camera with Z Plus.

1. Download Z Plus from ZAVIO official website..

2. Follow the instruction and install Z Plus.

3. Click the icon and get into the software.