Zamel EXTA ED-1 User manual

ED - 1 SIGNALLING BELL INSTRUCTION MANUAL

ZAMEL Sp. z o.o.

ul. Zielona 27, 43-200 Pszczyna, Poland

Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04

www.zamelcet.com, e-mail: [email protected]

FEATURES

TECHNICAL DATA

DESCRIPTION

APPERANCE

یElectromechanical bell,

یBrass bell gong in a plastic casing,

یDesigned for acoustic signalling at

home and industrial systems,

یEither surface-mounted or TH35 rail

mounted,

یDouble-module casing,

یSound level: approximately 68 dB.

The ED-1 electromechanical bell may be

used in various systems, where acoustic

signalling is needed (e.g. phase decay

signalling). The bell is designed for

mounting on TH35 rail.

The device should be

connected to a single-

phase system accordin-

gly to current standards.

The device connections

will be described in this

manual. Only qualiﬁed electricians are

allowed to mount, connect and adjust

the bell. It is necessary to read this ma-

nual before the device mounting. Do not

disassembly the timer casing or you will

lose any warranty rights and expose

yourself to the electric shock hazard.

Before mounting operation make sure

seriwnoitcennocehtgnitcennocsidfo

from the electric network. Use a cross-

head screwdriver of 3.5 mm diameter

to mount the device. The bell should

be carried, stored and used in an ap-

propriate way. Do not mount the bell in

case of any device parts lack, damage

or deformation. In case of malfunction

please notify the manufacturer.

ED - 1

Power terminals: L, N

Rated voltage: 230 V~

Rated voltage tolerance: -15 ÷ +10 %

Rated frequency: 50 / 60 Hz

Rated current: 4,5 VA

Switch-ON control: electromechanical bell

Connection terminals quantity: 2

Connection wire section: 0,2 ÷ 2,50 mm2

Operating temperature: 0 ÷ +35 oC

Operating position: optional

Casing fastening: TH 35 rail (accordingly to PN-EN 60715)

Casing IP: IP20 (PN-EN 60529)

Protection class: II

Overvoltage category: II

Pollution level: 2

Dimensions: double-module (35 mm) 90 x 35 x 66 mm

Weight: 92 g

Standard conformity: PN-EN 60669-1; PN-EN 60669-2-1

PN-EN 61000-4-2,3,4,5,6,11

Power terminals (L, N)

CAUTION

CONNECTIONS

ASSEMBLY, OPERATION

APPLICATION

CASING DIMENSIONS

PRODUCT FAMILY

The ED-1 signalling bell is a member of

the EDM product family.

1. Disconnect the electric network by

means of an appropriate cut-off,

current-limiting circuit-breaker or

separator.

2. Check if there is no any voltage

between power leads by means

of an appropriate gauge.

3. Mount the bell on TH 35 rail.

4. Connect the system leads accor-

ding to the electrical diagram.

5. Connect power supply circuit.

The bell is ready to work just right

after its appropriate connecting. The

bell starts operation after supplying

the device. The device generates the

sound until it is supplied.

TIME DIAGRAMS UNIT DIAGRAM

Device version:

01 - continuous

operation

02 - erasable

1 - bell

Device type

EDM -

Control and L1 phase voltage drop

signalling circuit.

When L1 voltage drops below the value

preset on PNM-10 voltage relay (e.g.

200 V) the circuit will switch ON alarm

signal (the ED -1 bell).

NOTE: The bell is supplied from L2

phase. Therefore it is necessary to

maintain 230 V on this phase.

WARRANTY

The product warranty is for a period of 24 months

Dealer signature & stamp, purchase date

1. ZAMEL provides a two-year warranty for its products.

2. The ZAMEL warranty does not cover: a) mechanical defects resulting from transport, loading / unloading or other circumstances

b) defects resulting from incorrect installation or operation of ZAMEL products; c) defects resulting from any changes made by CUS-

TOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold; d) defects resulting

from force majeure or other aleatory events for which ZAMEL is not liable; e) power supply (batteries) to be equipped with a device

in the moment of sale (if they appear);

3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect.;

4. ZAMEL will review complaints in accordance with existing regulations.;

5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.

6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy

between the goods and the contract.

Other Zamel Security System manuals

Zamel

Zamel gardi ZMB-01 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual