YOKOGAWA UTAdvanced UT52A Manual

Setup Procedure

UTAdvanced Quick Setting (pH Control)

TI 04L01L01-01EN

Foreword

The contents of this document are subject to change without prior notice as a result of improvements in performance or functionality.

Copying or reproduction by any means of all or any part of the contents of this document without permission is strictly prohibited.

Use of this document is at the users risk.

This document is subject to change without notice. TI 04L01L01-01EN

2011.12.16 1st Edition (YK)

Technical

Information

■Overview

This is an example of wiring and settings using the UTAdvanced Quick Setting function for "pH Control."

For more details, see the user's manual.

■Relevant models

Standard models of the UT52A and UT55A (if there are 2 types of pharmaceuticals, select the

heating/cooling model)

■System

■Wiring

Sampling can be controlled to interpolate dead time

Current input signal

4–20 mA

Current input signal

4–20 mA

Plant A waste liquid -->

Plant B waste liquid -->

Plant C waste liquid -->

Chemical dosing pump

pH meter

converter

0–14 pH

pH meter

sensor

Effluent

■Sampling control

■Nonlinear t

Control gain is switched by the Gap Gain Control

function

Current input

4–20 mA

Current

input

Power

supply －

＋

203

Current output

4–20 mA

＋

－

UT52A, UT55A Standard Models

pH meter

＋

－

Current

output

4–20 mA

Transmission

output

2/4

This document is subject to change without notice. TI 04L01L01-01EN 2011.12.16-00

■Settings

To set the sample PID control, input type (4 to 20 mA), and current control output (4 to 20 mA), set the

parameters below.

(1) Select the desired parameter with the UP or DOWN key

(2) Press SET/ENTER (the setting value blinks)

(3) Change the setting with the UP or DOWN key

(4) Press SET/ENTER to set the new value (the setting value stops blinking but remains

bright)

●Redoing the Quick Setting

Once functions are configured with the Quick Setting, the Quick Setting function

will not appear after you restart. However, you can redo the Quick Setting by

following the procedure below.

(1) Set the Quick Setting parameter QSM to ON, and re-engage power

(2) Set the PV input type parameter IN to OFF, and re-engage power

Press SET/ENTER to accept the "YES" option.

Quick Setting starts

First, the control type parameter CNT appears.

Set the CNT (control type) to S-PI (sample PI control).

OFF is displayed for IN (the PV input type).

Set IN (PV input type) to current signal: 4–20

(4–20 = 4.00 to 20.00 mA).

Set UNIT (PV input unit) to – (none). If necessary, use the unit label "pH."

ＳＴＡＲＴＱＵＩＣＫ

ＳＥＴＴＩＮＧ

QSM YES

CONTRＯＬＴYPE

CNt S-PI

PV INPUT TYPE

IN OFF

PV INPUT TYPE

IN 4ー20

PV INPUT UNIT

UNIt ー

Power

Quick Setting

start

3/4

This document is subject to change without notice. TI 04L01L01-01EN 2011.12.16-00

Set RH (maximum value of PV input range) to 20.00 mA (the initial value).

Set RL (minimum value of PV input range) to 4.00 mA (the initial value).

Set SDP (PV input scale decimal point position) to 2.

Set SH (maximum value of PV input scale) to 14.00 (pH).

Set SL (minimum value of PV input scale) to 0.00 (pH).

Set OT (output type selection) to 00.02: OUT terminal (current 4 to 20 mA).

Skip this parameter (not relevant).

Finally, EXIT is displayed. Select YES and press SET/ENTER to complete the

basic function setup and return to the operating screen. Or, you can select NO

to continue with the Quick Setting.

11.

13.

12.

10.

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 20.00

FINISH

EXIt YES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 4.00

CONTROL OUTPUT

CYCLE TIME

Cｔ30.0

OUTPUT TYPE

SELECTION

0ｔ00.02

SｄP2

SH 14.00

PV INPUT SCALE DECIMAL

POINT POSITION

MAXIMUM VALUE OF

PV INPUT SCALE

SL 0.00

MINIMUM VALUE OF

PV INPUT SCALE

11.

13.

12.

10.

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 20.00

FINISH

EXIt YES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 4.00

CONTROL OUTPUT

CYCLE TIME

Cｔ30.0

OUTPUT TYPE

SELECTION

0ｔ00.02

SｄP2

SH 14.00

PV INPUT SCALE DECIMAL

POINT POSITION

MAXIMUM VALUE OF

PV INPUT SCALE

SL 0.00

MINIMUM VALUE OF

PV INPUT SCALE

4/4

This document is subject to change without notice. TI 04L01L01-01EN 2011.12.16-00

Revision Information

Document name: Setup Procedure: UTAdvanced Quick Setting (pH Control)

Document number: TI 04L01L01-01EN

First edition: December, 2011

Newly released

Other manuals for UTAdvanced UT52A

This manual suits for next models

Other YOKOGAWA Controllers manuals

YOKOGAWA

YOKOGAWA UT52A/MDL series User manual

YOKOGAWA

YOKOGAWA CX2000 Guide

YOKOGAWA

YOKOGAWA UT750 User manual

YOKOGAWA

YOKOGAWA SMARTDAC+ GX20 User manual

YOKOGAWA

YOKOGAWA UT320 User manual

YOKOGAWA

YOKOGAWA UT35A/RSP User manual

YOKOGAWA

YOKOGAWA STARDOM FCN Manual

YOKOGAWA

YOKOGAWA UP150 User manual

YOKOGAWA

YOKOGAWA UT150L User manual

YOKOGAWA

YOKOGAWA Revolution FA-M3 R Manual

YOKOGAWA

YOKOGAWA UTAdvanced UP55A Manual

YOKOGAWA

YOKOGAWA STARDOM FCN-500 User manual

YOKOGAWA

YOKOGAWA UTAdvanced UT32A Manual

YOKOGAWA

YOKOGAWA UT350 User manual

YOKOGAWA

YOKOGAWA ProSafe-RS Manual

YOKOGAWA

YOKOGAWA UT35A-L User manual

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Installation and operation manual

YOKOGAWA

YOKOGAWA TC 10-L Installation and operation manual

YOKOGAWA

YOKOGAWA AQ2201 User manual

YOKOGAWA

YOKOGAWA UP350 User manual

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Manual

YOKOGAWA

YOKOGAWA UT32A-D User manual

YOKOGAWA

YOKOGAWA UT150L User manual

YOKOGAWA

YOKOGAWA DYNASERV DM Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual