Yakima LOCKN'LOAD Instruction sheet

09-13-593-Rev2 1/4

• Please read instructions carefully before installation.

• Check the contents of kit. Contact your YAKIMA dealer if any parts appear missing or damaged.

• Clean your platform prior to ﬁtting the LOCKN’LOAD Gas Bottle Restraint kit.

• Place these instructions in the vehicle’s glove box after installation is complete.

FIRST TIME INSTALLATION

KIT CONTENTS

ITEM COMPONENT QTY

1. Gas Bottle Restraint Strap x1

2. Ratchet Strap x1

3. M10 Eye Bolt x2

4. M10 Washer x2

5. M10 T-Nut x2

6. Baseplate x1

7. Protective Tape x3

®

PLATFORM SOLD SEPARATELY

PLATFORM GAS BOTTLE RESTRAINT KIT

1

3

2

4

5

LOCKN’LOAD

TM

6

7

09-13-593-Rev2 2/4

INSTALLATION

LOOSELY ASSEMBLE COMPONENTS ONTO BASE PLATE

Loosely assemble the Eye Bolts, Washers and T-Nuts to the Baseplate ensuring the T-Nuts are

placed under the plate. Ensure there is enough slack between the T-Nuts and the Baseplate

to allow the T-Nut to slide under and along the slat channels of the platform.

1

POSITION BASEPLATE

Determine where on the platform you wish

to install the gas bottle holder.

Place Baseplate onto platform and

manoeuvre Baseplate until left-most T-Nut

drops into closest slat channel cutout.

Slide the Baseplate along the slat channel

until the other T-Nut can be inserted in the

slat above to the right. Position Baseplate

to desired position.

2

x2

09-13-593-Rev2 3/4

SECURE STRAPS

Place the Restraint Strap over

the top of the 4kg Gas Bottle

and attach the hooked end to

Eye Bolt.

Feed the unhooked end of the

Restraint Strap through the

Ratchet. Attach the Ratchet

Strap hook to the other Eye

Bolt.

Tighten Ratchet until gas

bottle is ﬁrmly secured.

5

SECURE EYE BOLTS

Tighten Eye Bolts.

A tool such as a screwdriver, placed

through the eye of the bolt, may be

used for leverage to tighten the Eye

Bolt ﬁrmly.

3

• If straps become contaminated with oil, fuel or acid remove with hot soapy water.

• If the ratchet mechanism becomes stiff in use, a small amount of lubrication applied to the moving parts will

ease operation.

• Ratcheting strap must not be used for lifting. Protect from abrasion and friction. Do not tie knots in the straps.

Do not use a damaged strap.

• 150kg lashing capacity on the polypropylene webbing.

MAINTENANCE AND SAFETY

x2

APPLY PROTECTIVE TAPE

Remove backing off

Protective Tape and apply

as required to the top

surface of the Baseplate

to prevent scratching.

4

x3

09-13-593-Rev2 4/4

www.yakima.com.au

YAKIMA PRODUCTS, INC.

4101 Kruse Way

Lake Oswego, OR

97035-2541

USA

888 925 4621

YAKIMA EUROPE

Archimedesbaan 25

3439 ME Nieuwegein

The Netherlands

+31 2080 81425

YAKIMA AUSTRALIA PTY. LTD

17 Hinkler Court

Brendale, QLD 4500

Australia

1800 143 548

Other manuals for LOCKN'LOAD

7

Table of contents

Other Yakima Automobile Accessories manuals

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual

Prorack

Prorack K1163 manual