YAEN POS58C User manual
2/ 5www.asia-printer.com
Attentions
(1) The printer should be installed in a stable place to avoid vibration and impact.
(2) Do not use and store printer in places with high temperature, high humidity or heavy pollution.
(3) Connect the printer's power supply to an appropriate ground socket. Avoid using the same
socket as large motors or other devices that can cause voltage fluctuations in the power supply.
(4) Avoid water or conductive material (such as metal) entering the printer and turn off the power
immediately if this happens.
(5) Keep the printer printing from without paper or else it will damage to the printer head and the
rubbber roller.
(6) Please cut off the power supply if you will not use this printer for long time.
(7) The user shall not dismantle the printer for maintenance or modification without authorization.
(8) The power cord shall only be supplied with a randomly assigned power cord.
(9) In order to ensure the quality of printing and product life, it is recommended to use
high-quality printing paper.
(10) When unplugging and connecting the power cord, make sure the printer power is turned off.
(11) The power cord plug acts as a power disconnect device and its socket is located near the
device and is easily accessible.
(12) This product is only suitable for use in tropical climate at an altitude of 5000 meters and
below.
Accessories
Printer Adapter USB cable
User Manual Paper roller
User Manual
4/ 5www.asia-printer.com
Main Features
*100mm/s high printing speed,
*support cashbox driving,
*small and exquisite, attractive appearance,
*rational construction, easily use and maintenance,
*with Bluetooth and USB communication ports for optional,
* Built-in data buffer (can receive printed data when printing),
*Characters can be enlarged, bold, underline printing, can adjust the character line spacing and left
and right spacing printing,
*Support different density bitmap and download graphics printing,
*Low power consumption and low operating cost,
*Compatible with ESC/POS printing instruction set,
*Support printer authentication, computer software binding, drive high-speed printing mode,
*Support for multiple international language libraries
Technical parameters:
LED Indicator and Buzzer Definition
Printer Status
BT Status
Green（BT）
Red (Error)
Buzzer
Mark
Power on
Initialization failure
Fast Blink
Once
Stand by
Disconnect
Blink
Connected
On
Top Cover Open
Disconnect
Blink
Blink
Once in every 2
seconds
Red light blink
slowly
Connected
On
Paper Out
Disconnect
Blink
On
Three times in
every 2 seconds
Connected
On
Low power
Disconnect
Blink
Blink
Twice short and
once long
Red light blink
slowly
Connected
On
High Temp.
Disconnect
Blink
Blink
Red light bnk fast
Connected
On
Revise
Blink
On
twinkle alternately
FW upgrade
On
FW upgrading Power can not disconnect
Printing
method
Direct line thermal
Interface type
BT+USB
Printing
speed
100mm/s
Reliability
50KM(continuespaper mode）
Paper
width
58mm
Printer input
voltage
D C 12V/2A
Printing
density
384dot/line
Cashbox
control
D C 12V/1A
5/ 5www.asia-printer.com
Printer driver
There are totally 3 methods to drive this POS58 desktop printer, one is to install driver under
WINDOWS, another one is to use port to drive, the last one is to use APP connected bluetooth to
drive.
(1) Install driver under WINDOWS
Add the printer to WINDOWS and specify the driver file in the drive disk to WINDOWS. Simply
call the driver in the program and start printing. In this way, it is the WINDOWS printer program
that converts the characters into a graphical bitmap for printing
(2) Port directly to drive
In this way, do not need to use a driver, just need to output the character directly to the port, and
by the printer internal hard font to achieve the character conversion printing, using port to drive
makes the printer more easily for control. If you use port direct drive mode, you need to use the
print command set to control the printer's printing. The ESC/POS command set has been
integrated into the printer.
(3) The APP Bluetooth connection driver connects the printer directly with the mobile phone APP
Bluetooth, and theAPP can edit the content, send and print.
Printer clearance
You shall clear the printer head once any of the following situations appear:
(1)Printing not clear；(2)Anywhere of the vertical column not clear (3) Paper feed noisy
How to clear the printer head:
(1) Power off the printer and open the cover, remove the paper roll,
(2) you need to wait for the printer head to be cool down if there is any printing just finished,
(3) Using a soft cotton cloth dipped in anhydrous ethanol (should be wring out) to wipe off the
dust and stains on the thermal printer head, after the anhydrous ethanol completely volatilizes,
close the cover to print again.
NOTE:
(1) Please power off the printer when you do any daily maintenance,
(2) Do not touch the printer head by hand or other metals, do not use tweezers to scratch the
printer head, the rubber rollers and the sensor surface, do not use organic solvents such as
gasoline and acetone.
Table of contents
Other YAEN Printer manuals
