Xerox Phaser 7300 User manual

Phaser® 7300 Color Printer

Copyright © 2002 Xerox Corporation. All Rights Reserved. 26

Output Trays

You can send output to the following trays:

To change the default output destination on the front panel:

1. With Menus highlighted, press the OK key.

2. Scroll to Printer Setup Menu using the Up Arrow or Down Arrow key.

3. Press the OK key.

4. Scroll to Job Defaults Menu and press the OK key.

5. Select Set Paper Destination and press the OK key.

6. Select either Top Output Tray or Left Side Output Tray and press the OK key.

The output goes to the default tray unless specifically changed in the printer driver.

Note

When you select the Left Side Output Tray as the paper destination and the Left Side Output

Tray is not open, the printer displays an error message on the front panel that the job will not

print until the Left Side Output Tray is opened.

Top Output Tray

■Default output destination.

■Delivers output facedown.

■Can be used for paper up to 18 inches (450 mm)

long.

Left Side Output Tray

■Delivers output faceup.

■Keeps the paper flat so is always used for printing on

envelopes, labels, business cards, and other specialty

media.

■Must be used when you print on paper that is over

18 inches (450 mm) long.

7300-17

2

1

Output Trays

Phaser® 7300 Color Printer 27

Offsetting output

When you send output to the Top Output Tray, you can also select offsetting. Offsetting separates print

jobs or collated sets of a single job by approximately 24 mm (.8 in.) in the output tray.

Note

If you send output to the Left Side Output Tray, the printer does not offset the output.

You must have a hard drive to have the printer offset collated sets.

You can switch job offsetting on or off on the front panel:

1. With Menus highlighted, press the OK key.

2. Scroll to Printer Setup Menu using the Up Arrow or Down Arrow key and press OK.

3. Scroll to Job Defaults Menu and press the OK key.

4. Scroll to Job Offset.

5. Select either On or Off by pressing the OK key.

Note

If you change job offsetting in your printer driver, this overrides the front panel setting for

your print jobs.

Other manuals for Phaser 7300

5

Table of contents

Other Xerox Printer manuals

Xerox

Xerox Phaser 7800DN User manual

Xerox

Xerox Phaser 740 User manual

Xerox

Xerox Document Centre 706 Series User manual

Xerox

Xerox Phaser 6100 User manual

Xerox

Xerox Phaser 6300 User manual

Xerox

Xerox Phaser 560 User manual

Xerox

Xerox Phaser 6300 User manual

Xerox

Xerox VersaLink C620 User manual

Xerox

Xerox C310 User manual

Xerox

Xerox DocuColor 1632 Quick start guide

Xerox

Xerox Phaser 6180 User manual

Xerox

Xerox 701P41586 User manual

Xerox

Xerox DocuPrint N2025 User manual

Xerox

Xerox Phaser 6120 User manual

Xerox

Xerox DocuPrint 4850 NPS User manual

Xerox

Xerox ColorQube 8580 Operating manual

Xerox

Xerox DocuPrint 4517 User manual

Xerox

Xerox Phaser 8560 User manual

Xerox

Xerox Document Workcenter 150 User manual

Xerox

Xerox DocuColor 1632 User manual

Xerox

Xerox WORKCENTER 5222 User manual

Xerox

Xerox Nuvera 100 roduction Systems Quick reference guide

Xerox

Xerox WorkCentre3325 Manual

Xerox

Xerox Phaser 6200DP User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide