Xerox 4215 Technical manual

XEROX

Xerox 4219/MRP

Xerox 4215/MRP

Mid Range Systems Printers

Installation Planning Guide

February 1994

720P13290

Xerox Corporation

701 S. Aviation Boulevard

El Segundo, CA 90245

copyrightable material and information now allowed by statutory

or judicial law or hereinafter granted, including without limitation,

material generated from the software programs which are

displayed on the screen, such as icons, screen displays, looks,

etc.

Printed in the United States of America

Xerox® and all Xerox products mentioned in this publication are

trademarks of XEROX CORPORATION. Adobe® and PostScript®

are trademarks of Adobe Systems, Incorporated. AS/400® is a

trademark of International Business Machines Corporation.

CS Triumvirate and CS Triumvirate Condensed are trademarks of

Agfa Corporation. CS Century Schoolbook, CS Courier, CS

Letter Gothic, CS Omega, CS Palacio, CS Times, are licensed to

Xerox Corporation by Agfa Corporation. ITC Avant Garde

Gothic®, ITC Bookman®, ITC Garamond®, ITC Korinna®, ITC New

Baskerville®, ITC Souvenir®, ITC Zapf Chancery® and ITC Zapf

Dingbats® are trademarks licensed to Xerox Corporation by

International Typeface Corporation.

Helvetica®, Palatino®, Times, and Univers® are trademarks of

Linotype-Hell AG and/or its subsidiaries. Monotype Bodoni is a

trademark of the Monotype Corporation plc. Other product

names used herein are trademarks of their respective owners.

Some excerpts from definitions and charts of Adobe Systems

Incorporated and Hewlett-Packard Company have been used

herein.

Changes are periodically made to this document. Changes,

technical inaccuracies, and typographic errors will be corrected in

subsequent editions.

This document was created on the Xerox 6085 Professional

Computer System using VP software. The typeface is Optima.

Notices

Installation caution

The Xerox 4219/MRP and 4215/MRP Mid Range Systems Printers

cannot be installed by customers. Only a Xerox service

representative should install the equipment.

Safety

CAUTION: This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance

with the installation requirements, may cause interference to

radio communications.

U.S.A.

This equipment has been tested and found to comply with the

limits for a Class A digital device pursuant Part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. Operation of this equipment in a

residential area is likely to cause harmful interference, in which

case, the user is required to correct the interference at personal

expense.

Canada

This digital apparatus does not exceed the Class A limits for radio

noise emissions from digital apparatus as set out in the radio

interference regulations of the Canadian department of

communications.

Les present appareil numerique n’emet pas de bruits

radioelectriques depassant les limites applicables aux appareils de

Classe A prescitees dans le reglement sur le brouillage

radioelectrique edicte par les ministre des communications du

Canada.

Europe: 50 Hz, 220 to 240 V equipment

This equipment has been tested and certified in conformance

with European commission directive 82/499/ECC and VDE

0871/0875, Class A, relating to radio frequency interference.

XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE iii

NOTICES

Laser safety

The 4219/MRP and 4215/MRP comply with appropriate safety

standards.

Specifically regarding lasers, the equipment complies with laser

product performance standards set by governmental,

international and national agencies as a Class 1 laser product. It

does not emit hazardous light; the beam is totally enclosed

during all phases of customer operation and maintenance.

WARNING: Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

Warning labels

There are several user accessible Laser Safety Warning labels

located on the printer. An example is shown below.

iv XEROX 4219/MRP AND 4215/MRP SYSTEMS INSTALLATION PLANNING GUIDE

NOTICES

These laser warning labels are placed on panels that cover areas

that are not operator serviceable. These panels are not to be

removed.

Operational safety

Your Xerox equipment and supplies are designed and tested to

meet strict safety requirements. These include safety agency

examination, approval, and compliance with established

environmental standards.

Attention to the following notes ensures the continued safe

operation of your equipment.

Do this

Always connect equipment to a properly grounded power source

receptacle. If in doubt, have the receptacle checked by a

qualified electrician.

WARNING: Improper connection of the equipment grounding

conductor can result in electrical shock.

Always place equipment on a floor or table with adequate

strength for the weight of the machine.

Always have at least two people move or relocate the

equipment.

Always use materials and supplies specifically designed for your

Xerox equipment.

WARNING: Use of unsuitable materials may result in poor

performance and can possibly create a hazardous condition.

Do not do this

Never attempt any maintenance function that is not specifically

described in this document.

Never remove any covers or guards that are fastened with screws

unless otherwise instructed. You cannot service areas within

these covers.

Never override or “cheat” electrical or mechanical devices.

Never operate the equipment if you notice unusual noises or

odors. Disconnect the power cord from the power source

receptacle and call Xerox service to correct the problem.

U.S. only: If you need any additional safety information

concerning the equipment or Xerox supplied materials, call the

following toll-free number: 1-800-828-6571.

Approvals and certification

60 Hz, 115 V Listed by Underwriters Laboratories, UL1950 (UL). Meets CSA

standards, C22.2 NO 950 (CSA).

50 Hz, 220 to 240 V Meets the British Standards Institution, IEC950 (BSI).

XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE v

Table of contents

Notices iii

Installation caution iii

Safety iii

Laser safety iv

Operational safety v

Introduction ix

About this guide ix

Contents ix

Conventions x

Related publications x

Xerox 4219/MRP and 4215/MRP library x

PostScript and PCL references xi

1. Overview 1-1

Standard features 1-1

Coax interface features 1-3

Twinax interface features 1-4

Optional features 1-4

Printer components 1-5

2. Installation planning tasks 2-1

Xerox responsibilities 2-1

Your responsibilities 2-2

Installation countdown log 2-3

3. Preinstallation 3-1

Delivery requirements 3-1

4219/MRP 4215/MRP dimensions 3-1

Space requirements 3-2

Electrical requirements 3-2

Operating environment 3-3

Noise level 3-3

Special configurations 3-3

Coax interface configurations 3-4

Twinax interface configurations 3-4

Non-printable area 3-6

XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE vii

TABLE OF CONTENTS

4. Connectivity 4-1

Coax environment 4-1

Twinax environment 4-2

PC direct connect environment 4-3

5. Preparing the installation checklists 5-1

Completing Checklist 3: General setup 5-1

Completing Checklist 4: Setup Printer—PCL 5 Setup 5-2

Completing Checklist 5: Setup Printer— PostScript Resolution,

Print Enhancement, Communications Priority, Panel Security 5-3

Completing Checklist 6: Parallel, Serial, Other I/O 5-4

Appendices A. Ordering fonts, options, and supplies A-1

B. Interface support B-1

C. Checklists C-1

Glossary GLOSSARY-1

Index INDEX-1

viii XEROX 4219/MRP 4215/MRP INSTALLATION PLANNING GUIDE

Introduction

This guide helps you prepare for the installation of the Xerox

4219/MRP and 4215/MRP Mid Range Systems Printers.

Information is provided on each 4219/MRP and 4215/MRP

component and its installation requirements.

About this guide

This guide directs the site planner in preinstallation procedures,

as well as ongoing activities after the printer has been installed.

Contents

This guide contains the following chapters:

Chapter 1 “Overview” presents a general overview of the printer and its

components.

Chapter 2 “Installation planning tasks” discusses preinstallation and

installation planning tasks. It identifies areas of responsibility and

the assignment of tasks. An installation countdown log is

included.

Chapter 3 “Preinstallation” explains tasks that must be performed prior to

installation to prepare the site. Electrical and environmental

specifications are included in this chapter.

Chapter 4 “Connectivity” gives an overview of the connectivity possibilities

by environment.

Chapter 5 “Preparing the installation checklists” guides you through the

options listed on the installation checklists which you must

complete prior to installation day.

Appendix A “Ordering fonts, options, and supplies” describes how to order

fonts, describes the available printer options, and explains how

to obtain Xerox service and supplies. A complete supplies and

accessories list is included.

Appendix B “Interface support” discusses the interface support available for

the printer.

Appendix C “Checklists” contains configuration checklists that help your

Xerox service representative configure your 4219/MRP or

4215/MRP on installation day.

A glossary is also included at the end of this guide.

XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE ix

INTRODUCTION

Conventions

This guide uses the following conventions throughout.

italics Italics are used for document and library names (for example, the

Xerox Coax Command Reference).

WARNING: Warnings are associated with the safety of people.

Other manuals for 4215

This manual suits for next models

Table of contents

Other Xerox Printer manuals

Xerox

Xerox DocuPrint 377CF Instruction Manual

Xerox

Xerox Legacy 4110 Manual

Xerox

Xerox Telecopier 7017 Product manual

Xerox

Xerox WorkCentre M24 Color Assembly instructions

Xerox

Xerox WorkCentre 5330 Instruction and safety manual

Xerox

Xerox Phaser 5335 User manual

Xerox

Xerox Phaser 4510 Operating manual

Xerox

Xerox Phaser 6700 User manual

Xerox

Xerox Versant 2100 Press Instruction Manual

Xerox

Xerox Phaser 7100 User manual

Xerox

Xerox Phaser 2135DT User manual

Xerox

Xerox Phaser 480X User manual

Xerox

Xerox DocuPrint 92C NPS User manual

Xerox

Xerox 770 Instruction Manual

Xerox

Xerox DocuPrint C2100 User manual

Xerox

Xerox 7760DN - Phaser Color Laser Printer User manual

Xerox

Xerox 8200B - Phaser Color Solid Ink Printer User manual

Xerox

Xerox 5500DN - Phaser B/W Laser Printer User manual

Xerox

Xerox DocuPrint P8E User manual

Xerox

Xerox Phaser 6500 Operating manual

Xerox

Xerox PHASER 6140 Operating and maintenance manual

Xerox

Xerox DocuPrint C1618 User manual

Xerox

Xerox Phaser 6120 User manual

Xerox

Xerox 4060 Instruction Manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide