Battery installation
NOTE: Make sure the main power switch is set to OFF prior to changing the batteries.
To install or change your pet’s batteries:
1. Locate and open the battery compartment
door on the belly of the toy by opening the
flap of fur.
2. Use a Phillips screwdriver (not included)
to remove two screws on the battery
compartment door.
3. Insert the 4 x “AA” batteries (included)
according to the diagram. Ensure that the
positive and negative polarities match the
illustrations inside the battery compartment.
4. Replace the battery compartment door and
replace the screws using the screwdriver.
Do not over-tighten. Close the flap on the
toy’s belly.
4
Battery details
Important battery information
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries [standard (Carbon-zinc), Alkaline or
rechargeable] or rechargeable batteries of different capacities.
• Remove rechargeable batteries from the toy before recharging them.
• Rechargeable batteries are only to be charged under adult supervision.
• Please respect the correct polarity, (+) and (-).
• Do not try to recharge non-rechargeable batteries.
• Do not dispose of batteries into fire.
• Replace all batteries of the same type/brand at the same time.
• The supply terminals are not to be short-circuited.
• Remove exhausted batteries from the toy.
• Batteries should be replaced by adults.
• Remove batteries if the toy is not going to be played with for some time .
• This instruction manual should be kept as it contains important information.
• Batteries should be recycled or disposed of as per state and local guidelines.
• Protect the environment by not disposing of this product with household waste. Check
your local authority for recycling advice and facilities.
