WorkPro NEO Series (Passive) User manual
NEO Series (Passive)
NEO Series (Active)
Rev 12.02.06
User Manual / Manual de Uso
The power tap is the slot of
the 5 position rotary switch to the desired tap.
selected by rotating
(*) Power Taps (70V)................................. 1
Power Taps (100V).................................... 2W(5kΩ)/4W(2k5Ω)/8W(1k2Ω)/16W(625Ω)
Low Impedance position.......................... 8Ω (30W)
Sensitivity (1W/1m) .................................. 87 dB
Max. SPL ..................................................... 99 dB
Frequency Response .............................. 70Hz - 20kHz
Elements.................................................... 4" Woofer + 0,5" Tweeter
Dimensions .............................................. 148 x 210 x 134 mm
Material (enclosure) ................................. ABS plastic
IP rating ..................................................... IP 54
RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)
Material (grille) ......................................... Aluminium
Weight ....................................................... 1,95 Kg
(*) The power taps indicated on the selector switch are calculated for 100V line. In the case of 70V line installation, each power
tap will correspond to half the value.
Specifications are subject to change without notice
W(4k9Ω)/2W(2k45Ω)/4W(1k22Ω)/8W(612Ω)
148
122
198 210 134
A NEO 4 contains two loudspeakers (black or white) and two metallic wall-mount
brackets.
carton
The connection is made through Euroblock terminals.
Ensure the correct polarity is observed.
Make sure to select the correct power tap
position before connecting the loudspeaker
to a 70/100V line amplifier. If the low
impedance position (8Ω) is selected, the
loudspeaker could be damaged!
1 User Manual/Manual de Uso NEO Series
EN
(*) Power Taps (70V)................................. 1
Power Taps (100V).................................... 2 Ω) Ω) Ω) Ω)
Low Impedance position.......................... 8Ω (40W)
Sensitivity (1W/1m) .................................. 88 dB
Max. SPL ..................................................... 100 dB
Frequency Response .............................. 60Hz - 20kHz
Elements.................................................... 5" Woofer + 0,5" Tweeter
Dimensions .............................................. 171 x 244 x 166 mm
Material (enclosure) ................................. ABS plastic
IP rating .................................................... IP 54
RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)
Material (grille) ......................................... Aluminium
Weight ....................................................... 2,3 Kg
W(4k9Ω)/2W(2k45Ω)/4W(1k22Ω)/8W(612Ω)
W(5k /4W(2k5 /8W(1k2 /16W(625
(*) The power taps indicated on the selector switch are calculated for 100V line. In the case of 70V line installation, each power
tap will correspond to half the value.
Specifications are subject to change without notice
171
153
210 244 166
A NEO 5 carton contains two loudspeakers (black or white) and two metallic wall-mount
brackets.
2 User Manual/Manual de Uso NEO Series
The power tap is the slot of
the 5 position rotary switch to the desired tap.
selected by rotating
The connection is made through Euroblock terminals.
Ensure the correct polarity is observed.
Make sure to select the correct power tap
position before connecting the loudspeaker
to a 70/100V line amplifier. If the low
impedance position (8Ω) is selected, the
loudspeaker could be damaged!
EN
A NEO 6 carton contains two loudspeakers (black or white) and two metallic wall-mount
brackets.
(*) Power Taps (70V).................................
Power Taps (100V).................................... 4 Ω) Ω) Ω) Ω)
Low Impedance position.......................... 8Ω (60W)
Sensitivity (1W/1m) .................................. 89 dB
Max. SPL ..................................................... 101 dB
Frequency Response .............................. 70Hz - 20kHz
Elements.................................................... 6.5" Woofer + 1" Tweeter
Dimensions .............................................. 200 x 290 x 175 mm
Material (enclosure) ................................. ABS plastic
IP rating ..................................................... IP 54
RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)
Material (grille) ......................................... Aluminium
Weight ....................................................... 3,1 Kg
2W(2k45Ω)/4W(1k22Ω)/8W(612Ω)16W(306Ω)
W(2k5 /8W(1k2 /16W(625 /32W(312
(*) The power taps indicated on the selector switch are calculated for 100V line. In the case of 70V line installation, each power
tap will correspond to half the value
Specifications are subject to change without notice
200
167
267 290 175
3 User Manual/Manual de Uso NEO Series
The power tap is the slot of
the 5 position rotary switch to the desired tap.
selected by rotating
The connection is made through Euroblock terminals.
Ensure the correct polarity is observed.
Make sure to select the correct power tap
position before connecting the loudspeaker
to a 70/100V line amplifier. If the low
impedance position (8Ω) is selected, the
loudspeaker could be damaged!
EN
260
218
333 370 240
A NEO 8 carton contains two loudspeakers (black or white) and two metallic wall-mount
brackets.
(*) Power Taps (70V).................................
Power Taps (100V).................................... 4 Ω) Ω) Ω) Ω)
Low Impedance position.......................... 8Ω (70W)
Sensitivity (1W/1m) .................................. 87 dB
Max. SPL ..................................................... 101 dB
Frequency Response .............................. 52Hz - 20kHz
Elements.................................................... 8" Woofer + 1" Tweeter
Dimensions .............................................. 260 x 370 x 240 mm
Material (enclosure) ................................. ABS plastic
IP rating .................................................... IP 54
RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)
Material (grille) ......................................... Aluminium
Weight ....................................................... 4,95 Kg
2W(2k45Ω)/4W(1k22Ω)/8W(612Ω)16W(306Ω)
W(2k5 /8W(1k2 /16W(625 /32W(312
(*) The power taps indicated on the selector switch are calculated for 100V line. In the case of 70V line installation, each power
tap will correspond to half the value.
Specifications are subject to change without notice
4 User Manual/Manual de Uso NEO Series
The power tap is
the slot of the 5 position rotary switch
to the desired tap.
selected by rotating
The connection is made through Euroblock terminals.
Ensure the correct polarity is observed.
Make sure to select the correct
power tap position before
connecting the loudspeaker to a
70/100V line amplifier. If the low
impedance position (8Ω) is
selected, the loudspeaker could
be damaged!
EN
171
153
210 244 166
The connection is made through euroblock terminals.
Take it into account the correct polarity.
Use the included twin conductors cable (Red/Black) 3m long to
connect both loudspeakers.
1
1
7
7
Volume Control Link connection (Passive unit) 2-pin euroblock
Treble Control Mains supply input (Use the included cable)
Bass Control Power Switch ON/OFF
L/R Unbalanced Input (RCA connectors) Fuse Holder
LED power AC 115V/230V main power selector
Stereo input (Mini-jack 3.5 mm) (X)
2
2
8
8
3
3
9
9
4
4
10
10
5
5
11
11
6
6
Elements.................................................... 5" Woofer + 0,5" Tweeter
Power Output ........................................... 2 x 25 W RMS
Input Sensitivity........................................ 1V /2.21 dBu
Frequency Response .............................. 60Hz - 20kHz
Dimensions .............................................. 171 x 244 x 166 mm
Material (enclosure) ................................. ABS plastic
IP rating .................................................... IP 54
RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)
Material (grille) ......................................... Aluminium
Weight ....................................................... 2,7 Kg
Specifications are subject to change without notice
two metallic wall-mount brackets, and a 3m link cable.
A NEO 5A carton contains an active loudspeaker and a passive one (black or white),
5 User Manual/Manual de Uso NEO Series
(X) This connector overrides RCA input
EN
The connection is made through euroblock terminals.
Take it into account the correct polarity.
Use the included twin conductors cable (Red/Black) 3m long to
connect both loudspeakers.
17
Volume Control Link connection (Passive unit) 2-pin euroblock
Treble Control Mains supply input (Use the included cable)
Bass Control Power Switch ON/OFF
L/R Unbalanced Input (RCA connectors) Fuse Holder
LED power AC 115V/230V main power selector
Stereo input (Mini-jack 3.5 mm)
28
39
410
10
511
11
6
6200
167
267 290 175
A NEO 6A carton contains an active loudspeaker and a passive one (black or white),
two metallic wall-mount brackets, and a 3m link cable.
Elements.................................................... 6.5" Woofer + 1" Tweeter
Power Output ........................................... 2 x 30 W RMS
Input Sensitivity........................................ 1V /2.21 dBu
Frequency Response .............................. 55Hz - 20kHz
Dimensions .............................................. 200 x 290 x 175 mm
Material (enclosure) ................................. ABS plastic
IP rating ..................................................... IP 54
RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)
Material (grille) ......................................... Aluminium
Weight ....................................................... 3,3 Kg
Specifications are subject to change without notice
6 User Manual/Manual de Uso NEO Series
(X)
(X)
This connector overrides RCA input
1234
57
89
EN
17
Volume Control
Treble Control
Mains supply input (Use the included cable)
Bass Control
Power Switch ON/OFF
L/R Unbalanced Input (RCA connectors)
Fuse Holder
LED power
AC 115V/230V main power selector
Euroblock input (balanced)
28
39
410
10
5
7
6
6
200
167
267 290 175
A NEO 8A carton contains an active loudspeaker (black or white)and one metallic wall-mount
bracket.
Elements.................................................... 8" Woofer + 1" Tweeter
Power Output ........................................... 40 W RMS
Input Sensitivity........................................ 1V /2.21 dBu
Frequency Response .............................. 50Hz - 20kHz
Dimensions .............................................. 260 x 370 x 240 mm
Material (enclosure) ................................. ABS plastic
IP rating ..................................................... IP 54
RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)
Material (grille) ......................................... Aluminium
Weight ....................................................... 5,46 Kg
Specifications are subject to change without notice
7 User Manual/Manual de Uso NEO Series
1234
5
8
9
EN
NEO A Series, Anti-clip system (Explanation)
The anti-clip system. If the 1V nominal input level is exceeded,
the anti-clip circuit will operate, attenuating the signal to prevent a clipped signal which
could cause the amplifier to distort. Low distortion electronic circuitry is used to maintain
the clarity of the input signal.
There are no user controls for the anti-clip circuit. If the level cannot be heard to increase
when the input level is increased, then the anti-clip circuit is operating, and the input level
or the VOLUME control should be decreased. Note that protection is not provided for
excessively high input levels (above 4V).
NEO A series features an
8 User Manual/Manual de Uso NEO Series
The NEO Series is rated to IP54 which means there is ingress
protection.
The NEO Series is designed for both indoor and outdoor operation where it is protected
from direct exposure to water (e.g. under a canopy). The use of protection from water and
humidity for the connection terminals is highly recommended (e.g. sealant/mastic).
limited dust and water
IP54 weather proof rating
45
23
1
1Rear wall mounting part
Threaded Ball
M10 nut
Rear threaded insert (a)
(a) Mounted to loudspeaker
2
3
4
5
6
7
Allen Screw 45 mm x M6
M6 nut
67
Metallic Wall-mount bracket
(b) Safety cable not included
Screw eyelet for safety cable (a) (b)
EN
Use the wall mounting part (1) to mark the fixing points
on the wall. Take into account the dimensions between
holes and the diameters marked in figure 1.
Drill wall and insert wall fixings. Screw wall mounting
part to wall.
Ensure that suitable screws and wall fixings are used.
If in any doubt contact a suitably qualified expert.
52 mm
35 mm
5 mm
Ø
95 mm
Unscrew the M6 Allen screw (2) to release the
threaded ball (4).
Mount (4) & (5) as shown in figure 3. Screw the threaded ball (4) into the threaded insert on
the rear of the loudspeaker (6) (loudspeaker not shown below).
Tighten M10 nut (5) against the loudspeaker with a spanner.
The assembly will now be as shown in figure 4.
Insert the complete assembly into the wall mounting
part, screw the Allen screw (2) several turns (do not
tighten completely). Now adjust the loudspeaker to
the desired position. Hold the speaker in position and
tighten the screw completely.
figure 1
figure 2
figure 3 figure 4
figure 5
9 User Manual/Manual de Uso NEO Series
WARNING: The maximum loading of this
bracket (10 kg), must never be
exceeded.
No other items must be
suspended or attached to the
bracket or speaker enclosure.
EN
This manual suits for next models
9
Table of contents
Languages:
Other WorkPro Speakers manuals
WorkPro
WorkPro IC 4 PRO User manual
WorkPro
WorkPro WND 6 User manual
WorkPro
WorkPro SoundNut Series User manual
WorkPro
WorkPro CS 206 User manual
WorkPro
WorkPro SN SUB 8 SoundNut Series User manual
WorkPro
WorkPro CPRO 4 User manual
WorkPro
WorkPro Studio-40A User manual
WorkPro
WorkPro neo User manual
WorkPro
WorkPro ARQ SERIES User manual
WorkPro
WorkPro IC 550T User manual
WorkPro
WorkPro ER 332 S User manual
WorkPro
WorkPro NGS 5L User manual
WorkPro
WorkPro NEO 5A BT User manual
WorkPro
WorkPro WPL In User manual
WorkPro
WorkPro IC 5M User manual
WorkPro
WorkPro CSR-208 User manual
WorkPro
WorkPro RT series User manual
WorkPro
WorkPro WPS 310 User manual
WorkPro
WorkPro UDA 16 User manual
WorkPro
WorkPro ER 332 S User manual
