Whispbar K792W User manual
K792W
Fitting Kit
EN Fitting Instructions for Basic Carrier
DMontageanleitung für Basisträgersystem
ES Instrucciones de montaje para el sistema
de transporte
FInstructions de montage pour Basic Carrier
NO Monteringsanvisning for takstativ
PT Instruções de Montagem para sistema de
transporte.
RU Установочные Инструкции для
Поперечных Балок
x 1 x 1 x 2 x 1
x 1 x 2 x 1 x 1
x 2
Revision No: 2B 1
Fitting Kit K792W
MAX kgs (lbs)
W/P WHD
Volvo
V70 , 5dr Estate 07-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
V70 , 5dr Estate 07-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
V70 , 5dr Estate 08-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
V70 , 5dr Estate 08-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit EN
K792W
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
3
Fitting Kit EN
K792W
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
4
Fitting Kit EN
K792W
●Remove locking screw.
●Apply protective strip as shown.
Trim if required.
●A, B, C = Black
●It is important to put the clamps in the
correct position on the vehicle.
●Letters refer to the part numbers stamped
on clamps.
●Clamp Part Number:
A = 307A
B = 308A
C = 309A
5
Fitting Kit EN
K792W
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
●Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
●Refer to the underside of the pad for the
part number.
6
Fitting Kit EN
K792W
●It is important to put the pads in the correct
position on the vehicle.
●Letters refer to the pad part numbers and
position.
●Pad Part Number:
A = 242A
B = 295A
C = 296A
●Place rubber pads (supplied with fitting kit)
on the vehicle roof. Pad may vary in shape
to that shown.
●Make sure the pad fits into the holes
underneath the foot.
7
Fitting Kit EN
K792W
Fitment
●Clamps directly to edge of roof under the
doors
●Please check the rear of this manual for
information relating specifically to your
vehicle.
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Install front clamp as shown.
●Install rear clamp as shown.
8
Fitting Kit EN
K792W
●Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●Tighten adjusting screw to 3 Nm (2.2 ft lb)
hand tight.
●Tighten locking screw on both legs evenly,
3 Nm (2.2 ft lb).
9
Fitting Kit EN
K792W
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Table of contents
Languages:
Other Whispbar Automobile Accessories manuals
Whispbar
Whispbar K663W User manual
Whispbar
Whispbar K374W User manual
Whispbar
Whispbar K1004W User manual
Whispbar
Whispbar K587W User manual
Whispbar
Whispbar K051W User manual
Whispbar
Whispbar K835W User manual
Whispbar
Whispbar K360W User manual
Whispbar
Whispbar S47W Install guide
Whispbar
Whispbar K519W User manual
Whispbar
Whispbar S51W User manual
Whispbar
Whispbar K698W User manual
Whispbar
Whispbar K432W User manual
Whispbar
Whispbar K673W User manual
Whispbar
Whispbar K122W User manual
Whispbar
Whispbar K045W User manual
Whispbar
Whispbar K175W Operation and installation manual
Whispbar
Whispbar S42W User manual
Whispbar
Whispbar K556W User manual
Whispbar
Whispbar K751W User manual
Whispbar
Whispbar K822 User manual
