Whirlpool LA6900XKW1 User manual

This book

will help you keep your washer

looking new and doing its best. It also tells you

how to get help if something seems to be

wrong.

Keep this book in the LAUNDRY INFORMA-

TION CENTERfolder with the “laundry Guide,”

washer instructions and other information you

want handy.

The Model and Serial A

Number Plate will be in one

of these places.

Copy your Model and Serial

Numbers here

Model Number

If you ever need service, parts or help,

the person you call will need your

washer’s complete model and serial

numbers.

These numbers are on a plate under

the washer lid. Copy them in these

spaces to keep them handy.

Serial Number

Purchase / lnsta llation Date

Service Company and Phone

Number

Contents

CARING FOR YOUR WASHER

covers the kinds of things you should and should not

do to keep your washer at its best. There is even a part

on winterizing the washer if it is ever exposed to

freezing cold.

BEFORE CALLING FOR SERVICE

will help you avoid unnecessary service

calls, including calls for WASHING PROBLEMS

that are not caused by the washer.

IF YOU NEED SERVICE OR HELP

tells you how to find a TECH-CARE’ Service Company. It

also tells you how to reach Whirlpool Corporation if you

need more help.

page4

page 6

page

page 11

TAKE GOOD CARE OF ANY APPLIANCE

and it will do its job better, last longer and stay looking newer. This

book will tell you how.

Before usbg your washer

Please read this booklet to be

Is protected from the weather.

sure your washer is used and cared for

Is not run by children or anyone

properly. It will help you get the best unable to operate it properly.

results and longest life your washer Remove the Consumer Buy

was designed to give. Guide label. It will be easier to remove

You are personally responsible

before the washer is used.

for making sure that your washer...

Is installed according to installation

instructions.

Is properly installed and leveled on a

floor that can support the weight.*

Is connected to the right kind of outlet,

electric supply, water supply and

drain.*

Is properly electrically grounded.-%

Is used only for jobs normally

expected of home automatic washers.

Is properly maintained.

Wipe out the basket with a damp

cloth before using to remove dust from

storing or shipping.

SPECIALINSTRUCTIONS: See the Laun-

dry Guide for tips on detergents, other

laundry aids and instructions for wash-

ing special Items.

*See the Installation Instructions for

complete information.

Carbg for your washer

These pages will show you how to care for your washer so it will

work for you as long as it possibly can.

WHEN NOT WASHING, keep both water

faucets turned off. This takes the pressure

off the water inlet valve and hoses.

REMOVE SHARP OBJECTS such as

pins, buckles, etc., before washing.

Close metal zippers.

After washing items with colors that

bleed, run the washer through a

RINSE and SPIN. After dyeing in

your washer, run through a com-

plete wash cycle (see Laundry

Guide page 13 ).

AFTER WASHING, use a soft dry cloth to

wipe the outside and inside dry. Leave

the lid up until the basket is dry. Wipe up

spills right away.

They can dull or dam-

age the finish.

SHARP OR HEAVY OBJECTS should never

be put on or in the washer. Check pock-

ets for bolts, nuts, tools, etc.

SOME PRETREATMENT PRODUCTS can

damage washer and dryer dials, con-

soles and finishes. Do not use these

products on or near your washer or

dryer control panel.

Your Warranty does

not cover damage to your appliance

caused by pretreatment products.

WINTERIZING

Install and store your washer where it won’t

freeze. Because some water stays in the washer,

freezing can cause a lot of damage If your washer

is stored or moved during cold weather, it’s o good

idea to winterize it by following these steps:

1. Shut off both water 2. Put a quart of

faucets. Disconnect automobile-type

and drain the water antifreeze in the

inlet hoses. basket.

3. Set the washer for a

DRAIN and SPIN. Let

it run for about 30

seconds, This mixes

the antifreeze with

the water left in the

washer.

To use the washer again,

1. flush the water pipes and hoses,

put the hoses on the washer,

3. turn on the water.

4. Put a cup of

detergent in the

washer basket.

Then run the

washer through a

complete cycle;

it will be ready

to use.

Before calling for semke

IS SOMETHING WRONG? You may be able to save yourself the

trouble of calling in a service technician. Before calling for service,

check these pages to see if you really need it.

WASHER DOES NOT FILL OR FILLS SLOWLY

Is the power supply

Are both water faucets

cord plugged in? open all the way?

Is a fuse blown or circuit-breaker tripped?

WASHER DOES NOT SPIN

Are the water supply

hoses kinked or

pinched?

Is the Cycle Control Knob

set to a fill area and

pulled out?

Is the lid closed completely?

Is the power supply cord plugged in?

Is a fuse blown or circuit-breaker tripped?

WASHER FILLS AND DRAINS: NO AGIIAIION

Is the Cycle Control Knob pointing to a

fill and agitate area in a cycle? Is it

pulled out?

A. FILL;

AGITATE MINUTES SHOWN; DRAIN; SPIN.

B. FILL;

LITTLEOR NO AGITATION; DRAIN; SPIN.

C. RINSE FILL;

RINSE AGITATION; DRAIN; SPIN.

D. FILL;

LITTLEOR NO AGITATION; DRAIN; SPIN.

E. DRAIN; SPIN.

WASHER DRAINS AT THE WRONG TIMES

is the drain hose at least 34 Inches above the

floor? It should be.

Is the outlet end higher than the water level in

the washer? It should be.

Does the drain hose fit

tightly in the standpipe?

It shouldn’t.

ABOUT %” SPACE.

WASHER STOPS AND STARTS

Is the pause during the PERMANENT PRESSCycle? The washer

will stop for about 1% minutes during cool-down. (See user

instructions.)

Is the pause during the SOAK Cycle? The washer will agitate,

stop to soak, agitate, etc., during this cycle.

Short pauses are normal in all cycles. See your user

instructions WRIER SOMETIMES LEAKS

FROM WASHER

Was a very low water level used? High

agitation speed, low water level and

very small load can splash water over

the top of the basket. These splashes may

be seen on the floor.

a Is the manual filter clean? A clogged

filter can cause some spillover.

Was the washer filled before the load

was added? When the washer is full of

water, adding the load can

rake

the

water level enough to splash out during

agitation. 7

WASHING POSSIBLE

PROBLEMS CAUSES SOLUTIONS

MANUAL LINT FILTER NOT CLEAN

A clogged or over filled manual-clean filter may

not filter lint as well as a clean one. Clean the filter

after every wash.

LOAD NOT SORTED RIGHT

Lint givers (bath towels, etc.) should not be washed

with linttakers (synthetics, permanent press].

OVERLOADING Too many items in a load will not move freely in the

water. Lint can be trapped in the load instead of

flowing through the filter with the water.

Overloading can also cause items to rub together

too much. This can make lint as well as damage

fabrics.

PAPER OR TISSUE IN POCKETS

A small scrap of paper can make a lot of lint.

Clean pockets carefully.

STATIC ELECTRICITY

Use fabric softener in the final deep rinse to help

eliminate static electricity.

Use correct dryer settings for fabric type.

Overdying synthetics can create lint-attracting

static electricity.

NOT ENOUGH DETERGENT

Use enough detergent to hold the lint in the water

until the drain. The amount you use depends on

water hardness and the soil in the wash load.

MISUSE OF CHLORINE BLEACH

When chlorine bleach is not properly used

[poured on fabrics in full strength, using too much or

too often, used on the wrong fabrics, etc.), fabrics will

be weakened. The weakened fabric can rip several

washings later (see “Laundry Guide” page 11).Follow

package directions carefully.

SHARP ARTICLES NOT REMOVED

FASTENERS NOT FASTENED

Hooks and eyes, zippers and snaps should be

fastened so they can’t catch and snag some

fabrics.

Remove sharp objects (safety and straight pins,

paper clips, etc.) from clothes before washing.

Turn synthetic knits inside out before washing.

DAMAGE NOT MENDED BEFORE WASHING

Mend rips, broken threads in seams and tears

before washing.

WASHING

PROBLEMS POSSIBLE

CAUSES SOLUTION

GRAY

WHITES,

DINGY

COLORS

POOR SORTING White and colored articles should be washed

separately. Non-colorfast items that may bleed

should also be in a separate load.

NOT ENOUGH DETERGENT

Use enough detergent to remove soil and hold it in

suspension until it drains.

WATER NOT HOT ENOUGH

Hot water should be at least 130°F (54°C) to clean

heavy or greasy soils.

WATER TOO HARD FOR SOAP OR DETERGENT USED

Hard water and soap or non-phosphate detergent

can form a residue or scum that deposits on fabrics.

In areas where ohosohate deteraents are not

allowed: ’ ’

Use a liquid detergent in increased amounts for

water hardness and amount of soil.

Use a water conditioner in the wash and deep

rinse.

Install a mechanical water softener if water is very

hard and soap (not synthetic detergent) is used.

If you have the problem: For the next few times you wash, use an

increased amount of detergent. Use the correct cycle and water

temperature for the fa brie being washed.

GREASY

LOOKING

FABRIC SOFTENER IN THE WASH WATER

Liquid fabric softeners can combine with soap or

detergent to form a greasy looking stain or spot. Add

to deep rinse only.

Do not use any other laundry aid in combination

with fabric softener.

NOT ENOUGH DETERGENT

You need enough detergent to hold soil so it drains

away with the wash water. If soil doesn’t drain away,

it can stick to the outer tub. From there, it can wash

back into the load during the next wash.

Treat such spots with a liquid all-purpose

detergent or soil and stain remover.

Wash in warm or hot water with more detergent

than normal.

Stubborn stains may require more than one

treatment. Do not machine dry between washings.

To remove deposits from outer tub, ut the

unloaded washer through a camp ete cycle using

hot water, 2 cups (500 mL) of detergent and 1 cup

(250 mL) of chlorine bleach.

WASHING

PROBLEMS POSSIBLE

CAUSES SOLUTION

STIFF,

SPIN TOO SLOW OR TOO SHORT

HARSH

Use cycle setting with longer spin, higher speed.

FABRICS

Load carefully so an off-balance does not slow the

(USUALLY

spin.

COTTONS)

HARD WATER WITH SOAP OR TOO LITTLE DETERGENT

Soap will only work well in soft or softened water.

See the “Laundry Guide” for the amount of detergent

to use.

LINE DRYING Dry cottons in a dryer,

BUILD-UP OF BODY OILS

Usually noticed on the middle of pillowcases and

sheets, or underarms of cottons, this condition can

usually be corrected by

Making sure the water is hot enough (at least 130°F

[WC] ;

Using Ihe right amount of detergent [see your

“Laundry Guide”).

YELLOW

AREAS

OVEL

YELLOV

mmLAu,.

DML

CHLORINE STAINING

v; Washing with chlorine bleach can permanently

DKVWd

stain some fabrics. Read the manufacturers label to

YELLOW

avoid the problem. The stain can sometimes be

STAINS

removed with a color remover. Follow the package

directions.

LOAD TOO

WET AFTER

SPIN

IRON IN WATER HEATER OR PIPES

Run the hot water a few minutes before washina to

clear the lines. Drain the water heater now and tt%en

IRON AND MANGANESE IN THE WATER

Do not use chlorine bleach.

Use a non-precipitating water conditioner in the

wash and rinse water.

0 Install an iron filter.

SLOW SPIN Use

high

spin cycles for heavy cottons (towels, jeans,

etc.). Short slow spins do not remove enough water from

heavy cottons. Balance load.

COLD RINSES Cold rinses save energy and money and leave fewer

wrinkles, but do leave loads a little colder and wetter.

LID OPEN Washer will not spin if lid is left open. Load will be drip-

ping wet.

Table of contents

Other Whirlpool Washer manuals

Whirlpool

Whirlpool W11355380A User manual

Whirlpool

Whirlpool WFW80HEBW User manual

Whirlpool

Whirlpool WVIID1058BKG User manual

Whirlpool

Whirlpool CGD9060 User manual

Whirlpool

Whirlpool AWT 4089 User manual

Whirlpool

Whirlpool CABRIO W10026592A User manual

Whirlpool

Whirlpool AWG 908 E User manual

Whirlpool

Whirlpool Top Loading Washing Machine User manual

Whirlpool

Whirlpool LC4900XS User manual

Whirlpool

Whirlpool WFW9620HBK User guide

Whirlpool

Whirlpool WFW97HEXR Assembly instructions

Whirlpool

Whirlpool Vantage WTW7990XG Assembly instructions

Whirlpool

Whirlpool Duet steam WFW9640XW User manual

Whirlpool

Whirlpool AWG 338 User manual

Whirlpool

Whirlpool Kirkland Signature SAWB600HQ0 User manual

Whirlpool

Whirlpool WED6605MW User manual

Whirlpool

Whirlpool TAWX400RQ2 User manual

Whirlpool

Whirlpool LA7900XP User manual

Whirlpool

Whirlpool LST7233AG0 User manual

Whirlpool

Whirlpool LCR5232HQ2 User manual

Whirlpool

Whirlpool Duet WFW9200SQ00 Troubleshooting guide

Whirlpool

Whirlpool AWM 827 User manual

Whirlpool

Whirlpool AWT 8123 D - SERVICE User manual

Whirlpool

Whirlpool CAE2745 User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Beko

Beko WKB 51231 PTMA manual