Waring CB15 SERIES User manual

1 GALLON BLENDERS

LICUADORAS DE 4 L

MÉLANGEURS DE 4 L

120 V

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

Para su seguridad y para disfrutar plenamente de este producto,

siempre lea cuidadosamente las instrucciones antes del uso.

Aﬁn que cet appareil vous procure en toute sécurité beaucoup de

satisfaction, lire attentivement le mode d’emploi avant de l’utiliser.

CB15 Series

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be taken, including the following:

1. READ ALL INSTRUCTIONS.

2. Unplug from outlet when not in use, before putting

on or taking off parts, and before cleaning.

3. To protect against electrical hazards, do not immerse

the blender base in water or other liquids.

4. Avoid coming into contact with moving parts.

5. Do not operate any appliance with a damaged cord or

plug, or after the appliance malfunctions or is dropped

or damaged in any manner. Return appliance to the

nearest authorized service facility for examination, repair

or electrical or mechanical adjustment.

6. The use of attachments, including canning jars, not

recommended by the appliance manufacturer may

cause hazards.

7. Do not use outdoors.

8. Do not let cord hang over edge of table or counter, or

touch hot surfaces.

9. Keep hands and utensils out of container while blending

to prevent the possibility of severe personal injury and/or

damage to the blender. A rubber scraper may be used,

but only when the blender is not running.

10. Blades are sharp. Handle carefully.

11. Always operate blender with cover in place.

12. When blending hot liquids, completely remove the

stopper in the cover before turning on the blender.

See Hot Blending Instructions, page 9.

13. This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge.

14. Children should be supervised to ensure that they do not

play with the appliance.

15. DO NOT use carbonated liquids in the blender jar or

any blending container. Using carbonated liquids in the

included blender jar or any other compatible blender jar

may result in injury.

16. DO NOT blend oil or oil-based products as peanut butter

for greater than 5 minutes.

17. Never remove blender jar from base unit until the blade

and coupling have stopped.

18. Spigot assembly must be handwashed only. Do not run

the spigot through the dishwasher.

19. The contents of the blender cannot reach beyond 140° F

when operating with a spigot. Note that when blending

the temperature of the contents will increase due to the

friction of the blade.

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

• Capacity: 4-liter working capacity

• Rating: 120 Volts–60HZ–Single Phase AC –15.0 Amps.

(U.S. models only)

• Base: Die-cast – gray coating

• Container: Stainless steel or copolyester containter with

stainless steel blades – rubber clamp-on lid

• Bearing: High performance ball bearing

• Cord: 7 feet (2.44 m) – 3-conductor ground cord with strain

relief in base

• Overall Height: 26 inches (66 cm)

• Weight: 38 pounds (17.2 kg) net – Shipping Weight: 41

pounds (18.6 kg)

• cETLus, NSF Listed

• Operating Cycle: 3 min. ON/1 min. OFF

120V GROUNDING INSTRUCTIONS

For your protection, this appliance is equipped with a

3-conductor cord set.

120-volt units are supplied with a molded 3-prong

grounding-type plug (NEMA 5-15P) and should be used

in combination with a properly connected grounding type

outlet, as shown in Figure 1.

If a grounding type outlet is not available, an adapter, shown

in Figure 2, may be utilized to enable a 2-slot wall outlet to

be used with a 3-prong plug. (NOTE:Use of an adapter is

not permitted in Canada and Europe.)

The adapter must be grounded by attaching its grounding

lug under the screw of the outlet cover plate. See gure 3.

Caution: Before using an adapter, it must be determined

that the outlet cover-plate screw is properly grounded. If in

doubt, consult a licensed electrician. Never use an adapter

unless you are sure it is properly grounded.

Wiring Color Codes

Green/Yellow: Earth Ground • Blue: Neutral • Brown: Live

NOTE: User-installed cord set plugs are not permitted

in Europe.

SPIGOT ASSEMBLY (FOR SF MODELS ONLY)

Your spigot assembly includes the main spigot housing,

O-ring and rubber insert.

1. Plastic Feed Cap

2. Vinyl Lid

3. Metal Clamps

4. Spigot Adapter

5. O-ring

6. Spigot housing

7. Lever

8. Rubber Insert

SPIGOT ASSEMBLY (FOR SF MODELS ONLY)

Your spigot assembly includes the main spigot housing,

O-ring and rubber insert.

The O-ring comes assembled

in the jar spigot adapter but

can be removed for cleaning.

Always make sure the O-ring

is positioned securely in the

adapter on the jar before

inserting and operating the

spigot function. Figure 1.

The rubber insert has two loops

on the inside to t the lever

(refer to gure 2). The lever only

needs to be positioned into the

bottom loop. In the event that

one loop breaks, you can ip

the insert upside down and use

the other loop.

To assemble the rubber insert

pinch both sides as seen in

gure 3 and position the insert

inside the housing so that the

lever slides inside the rubber

insert and the bottom loop (for

the lever) is near the spigot

hole. Be sure that the bottom

of the rubber insert is ush

with the bottom of the spigot

housing.

Push the bottom of the lever

through the bottom loop of the

rubber insert.

g. 1

g. 2

g. 3

g. 4

CB15/CB15P OPERATION

1. Before starting, make sure that the blender cord is

unplugged.

2. Position container assembly on

motor base so that it is rmly

seated and not tilting to one side.

Plug blender cord into outlet.

3. Put ingredients into container.

Always add liquid ingredients rst, unless otherwise

specied in recipe. Do not ll above Max line. Place

cover securely on container and fasten the cover

clamps.

4. Press the STANDBY button to turn on the blender.

Green LED will illuminate. For continuous operation,

press either the LOW, MED, or HIGH button. When

nished blending, press STOP. For momentary

operation, press the PULSE button; motor will run

on HIGH speed until the button is released.

NOTE: Your CB15 utilizes a Slow Start™ feature.

When pressing MED or HIGH, the unit will start in the

LOW position for 1 second and then switch to the

setting selected. This allows for a more even blending

of ingredients in container.

5. Always hold container with one hand when starting

and while blending. Never operate without jar lid

properly clamped in place.

Once assembled, insert the

spigot into the adapter on the

jar and rotate clockwise until

the spigot completely stops

as shown in gure 5.

g. 5

6. Allow motor to come to a complete stop before

removing container. Never place the container on the

motor base or remove it from the motor base while

the motor is running.

7. Press the STANDBY button again to turn off the

blender.

8. Remove the container from the motor base and

empty the contents.

9. Wash and dry container after each use. See Cleaning

and Sanitizing Instructions, starting on page 14.

10. Not for water-jet cleaning.

11. The use of ear protection is recommended during

extended operating periods.

CB15T/CB15TP OPERATION

1. Before starting, make sure that the blender cord is

unplugged.

2. Position container assembly on

motor base so that it is rmly

seated and not tilting to one side.

Plug blender cord into outlet.

3. Put ingredients into container.

Always add liquid ingredients rst, unless otherwise

specied in recipe. Do not ll above Max line. Place

cover securely on container and fasten the cover

clamps.

4. Press the STANDBY button to turn on the blender.

Press the UP arrow or DOWN arrow. The initial time

will be 10 seconds.

5. Push the UP arrow to set the time required. The timer

will advance only in 10-second intervals. Timer can be

set to the maximum of 3 minutes.

6. Select and press a speed button; the blender will

start and run for the selected time. It will count down

in 1-second intervals and stop at 0. NOTE: If you

want to increase or decrease time while timer is

counting down, press UP or DOWN arrows. Timer will

increase or decrease in 10-second intervals. After 5

seconds, the timer will turn off and return to manual

mode.

7. When using the timer again, the initial time will be the

last time set. NOTE: If unit has been unplugged, the

timer will default back to 10 seconds.

8. Always hold container with one hand when starting

and while blending. Never operate without container

lid properly clamped in place.

9. Allow motor to come to a complete stop before

removing container. Never place the container on the

motor base or remove it from the motor base while

the motor is running.

10. Press the STANDBY button again to turn off the

blender.

11. Remove the container from the motor base and

empty the contents.

12. Wash and dry container after each use. See Cleaning

and Sanitizing Instructions starting on page 14.

13. Not for water-jet cleaning.

14. The use of ear protection is recommended during

extended operating periods.

CB15V/CB15VP OPERATION

1. Before starting, make sure that the blender cord is

unplugged.

2. Position container assembly

on motor base so that it is

rmly seated and not tilting

to one side. Plug blender cord

into outlet.

3. Put ingredients into container. Always add liquid

ingredients rst, unless otherwise specied in recipe.

Do not ll above Max line. Place cover securely on

container and fasten the cover clamps.

4. Press the green STANDBY button to turn on the

blender. Green LED will illuminate and remain steady.

Select the desired speed with the variable speed

control knob. Press the red START/STOP button to

begin blending. You may change the speed with the

variable speed control knob anytime during blending.

When nished blending, press START/STOP button.

For momentary operation, press the gray PULSE

button; motor will run on HIGH speed until the button

is released. The green LED will blink during operation.

5. Always hold container with one hand when starting

and while blending. Never operate without container

lid properly clamped in place.

6. Allow motor to come to a complete stop before

removing container. Never place the container on the

motor base or remove it from the motor base while

the motor is running.

7. Press the STANDBY button again to turn off the

blender.

8. Remove the container from the motor base and

empty the contents.

Other manuals for CB15 SERIES

This manual suits for next models

Table of contents

Languages:

Other Waring Blender manuals

Waring

Waring CB15 SERIES User manual

Waring

Waring Big Stix WSB2W User manual

Waring

Waring EW-04242-11 User manual

Waring

Waring MBB User manual

Waring

Waring TAILGATER TG15 User manual

Waring

Waring MMB Series User manual

Waring

Waring NuBlend BB180PK User manual

Waring

Waring PB Series User manual

Waring

Waring BOLT WSB38X User manual

Waring

Waring BB300 User manual

Waring

Waring Mx series User manual

Waring

Waring BB300 User manual

Waring

Waring QUIK STIK PLUS WSB40E User manual

Waring

Waring 040072000829 User manual

Waring

Waring WPB User manual

Waring

Waring Xtreme MX1000XTX User manual

Waring

Waring BB155 SERIES User manual

Waring

Waring MMB145 User manual

Waring

Waring PRO MX1000R User manual

Waring

Waring Mx series User manual

Waring

Waring Quik Stik Xpress WSB25X User manual

Waring

Waring MX1200XTX User manual

Waring

Waring Torq 2.0 TBB160 User manual

Waring

Waring Torq 2.0 TBB175S6 User manual

Popular Blender manuals by other brands

ROTOR

ROTOR 1125.201 instruction manual

Braun

Braun Multiquick 5 Vario series User instructions

ARENDO

ARENDO MIRA 305424 user manual

CHEF-BUILT

CHEF-BUILT CCB-3500 instruction manual

Viconte

Viconte VC-4406 instruction manual

Oster

Oster BLSTAB-CB0 user manual

HOFFEN

HOFFEN MC-3005 instruction manual

Black & Decker

Black & Decker BLC18750DM user guide

Sunbeam

Sunbeam 4182 user manual

Bialetti

Bialetti FMX35 Instructions for use

Black & Decker

Black & Decker BL8000 user manual

Duronic

Duronic BL530 manual

Exquisit

Exquisit MS 3002 wes instruction manual

Lumme

Lumme LU-KP1891A user manual

Binatone

Binatone HB-735 instruction manual

Moulinex

Moulinex LM936E10 manual

Oster

Oster VERSA Performance guide

Ninja

Ninja NN210Q instructions