Waring TAILGATER TG15 User manual

TAILGATER™BLENDER

TG15

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

CONTENTS

ImportantSafeguards.............................1

Important Hot Blending Instructions . . . . . . . . . . . . . . . . . . 3

OperatingInstructions.............................3

How To Assemble Containers with Removable Blades . . . 4

How To Disassemble and Clean Containers with

Removable Blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

HowToCleanUnitBase...........................6

FuseReplacement................................6

IMPORTANT: Always unplug the Waring Pro®

TailgaterTM Blender from outlet when disassembling

and assembling.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed, including the following.

READ ALL INSTRUCTIONS.

1. To protect against risk of electrical shock, do not

immerse the blender base in water or other liquid.

2. Close supervision is necessary when any appliance is

used by or near children.

3. Unplug from outlet when not in use, before putting

on or taking off parts, and before cleaning.

4. Avoid contact with moving parts.

5. Do not operate the Waring Pro®Blender or any other

electrical equipment with a damaged cord or plug, or

after the unit malfunctions, or is dropped or damaged in

any manner. Return it to the nearest authorized service

facility for examination, repair, or adjustment.

6. The use of attachments, including canning jars, not

recommended or sold by Waring may cause re,

electric shock, or injury.

7. Do not let cord hang over edge of table or counter, or

touch hot surfaces.

8. Keep hands and utensils out of jar while blending, to

prevent the possibility of severe personal injury and/or

damage to the blender. A rubber spatula may be used,

but must be used only when the blender is not running.

9. Blades are very sharp. Handle carefully.

10. To avoid injury, never place blade assembly on the base

unless container is properly attached.

11. Always operate blender with cover in place.

12. For blending hot liquids, see “Hot Blending

Instructions,” next page.

13. Screw on base collar rmly when assembling container.

Injury can result if moving blades accidentally become

exposed.

14. Do not leave blender unattended while it is running.

SAVE THESE INSTRUCTIONS

IMPORTANT:

HOT BLENDING INSTRUCTIONS

To minimize possibility of being scalded when blending hot

ingredients, the following precautions and procedures must

be observed:

1. Begin blending with no more than one cup (8 oz.) of

ingredients.

2. Before turning blender on, remove the center lid insert.

This will allow venting of the rapidly heated and

expanding air.

3. Start blending on low speed.

4. While blender is running, up to 1½ cups (12 oz.) of

additional liquid can be added. Pour liquid slowly

through the opening in the lid.

OPERATING INSTRUCTIONS

1. When placing the container on the unit base, make sure

that the unit is turned off and is at a complete stop.

Do not put the container on or take it off while the unit

is running. Doing so may damage the drive shaft or

blade assembly. For best results, do not ll container

above 3-cup level.

2. With the switch in the Off position, plug the blender

into a 12-volt cigarette lighter receptacle.

3. The Waring Pro®Tailgater™Blender is ideal for blending

ice drinks. For best results, keep the blades covered

with liquid, turn the unit on, remove the lid insert, and

feed the ice cubes slowly into the container. NOTE:

Never use containers other than Waring Pro®

Blender containers with your unit.

4. For other blending tasks, put ingredients into container,

then put the lid on rmly. Always add liquid ingredients

rst, unless otherwise specied in recipe. Always hold

container with one hand while blending.

HOW TO ASSEMBLE CONTAINERS WITH

REMOVABLE BLADES

Always wash and rinse container prior to initial use.

1. Before starting, make sure that the blender cord is

unplugged and that the switch is in the Off position.

2. Refer to Figure 1 on page 5. The following points are

important to note when putting together the container

assembly:

• Container gasket must be placed between blade

assembly and container.

• Collar must be threaded properly onto the blender

container base, and securely tightened before placing

food or liquid in the container.

• To ensure proper assembly, place the blender

container upside down and turn the collar

counterclockwise until securely tightened.

3. Place assembled blender jar on unit base so that it is

rmly seated and not tilted to one side. Never place the

collar or blade assembly on the unit base unless the

container has been completely assembled and securely

tightened.

HOW TO DISASSEMBLE AND CLEAN

CONTAINERS WITH

REMOVABLE BLADES

Always wash and rinse container

immediately after use.

1. Be sure the switch is in the

Off position.

2. Remove the container

assembly from the unit base

and empty the contents.

3. To disassemble the Waring

Pro®Tailgater™Blender, turn

container collar clockwise.

4. The collar, blade assembly and

gasket are dishwasher safe.

The plastic container lid and

insert must be washed by

hand. Allow all parts to air dry.

5. Be certain all components are in the proper position

when reassembling blender container and base.

Fig.1

HOW TO CLEAN UNIT BASE

1. To clean the unit base, unplug the power cord. Wipe the

exterior surfaces with a soft cloth or sponge dampened

with cleaning solution. Rinse with clean water. Do not

immerse the base in cleaning solution or water. Wipe

the base with dry towel.

FUSE REPLACEMENT

The plug on the blender power cord contains a replaceable

cartridge fuse. To gain access to the fuse, push the metal

tip of the plug inward as far as it will go, then turn it

counterclockwise until it releases. Withdraw the tip, with

the fuse attached, by pulling it straight out of the plug body.

Replace fuse with one of same size and rating (15 Amperes,

32 Volts, Slow-Blow). Reassemble plug by reversing above

procedure.

Waring Consumer Products

Division of Conair Corporation

150 Milford Road

East Windsor, NJ 08520

www.waringproducts.com

Printed in USA

TG15 Tailgater IB

08WR204

028340

Other manuals for TAILGATER TG15

This manual suits for next models

Table of contents

Other Waring Blender manuals

Popular Blender manuals by other brands

ROTOR

ROTOR 1125.201 instruction manual

Braun

Braun Multiquick 5 Vario series User instructions

ARENDO

ARENDO MIRA 305424 user manual

CHEF-BUILT

CHEF-BUILT CCB-3500 instruction manual

Viconte

Viconte VC-4406 instruction manual

Oster

Oster BLSTAB-CB0 user manual

HOFFEN

HOFFEN MC-3005 instruction manual

Black & Decker

Black & Decker BLC18750DM user guide

Sunbeam

Sunbeam 4182 user manual

Bialetti

Bialetti FMX35 Instructions for use

Black & Decker

Black & Decker BL8000 user manual

Duronic

Duronic BL530 manual

Exquisit

Exquisit MS 3002 wes instruction manual

Lumme

Lumme LU-KP1891A user manual

Binatone

Binatone HB-735 instruction manual

Moulinex

Moulinex LM936E10 manual

Oster

Oster VERSA Performance guide

Ninja

Ninja NN210Q instructions