Vpon VP-8000 User manual
Network DVR System
Your best choice for digital video recording and remote surveillance
VP-8000
Intelligent Security System
User Manual
(Version:V2.0.1.1)
www.vpon21.com
Preface
Preface
Notice
The information in this manual was current when published. The manufacturer reserves the right to revise and improve its
products. All specifications are therefore subject to change without notice.
Note: Formosa21 will not be obligated to the responsibility outside the scope of VPON DVR.
Trademarks
VPON ® is a registered trademark of Formosa 21 Inc.
Microsoft, Windows, Internet Explorer ® are registered trademarks of Microsoft Corporation. Netscape, Navigator,
Communicator ® are registered trademarks of Netscape Corporation. Other brand and product names referred to in this manual
are trademarks or registered trademarks of their respective holders.
Trademarked names are used throughout this manual. Rather than place a symbol at each occurrence, trademarked names are
designated with initial capitalization. Inclusion or exclusion is not a judgment on the validity or legal status of the term.
Warning
To reduce risk of electric shock, do not remove cover. No user service-able parts inside. Refer servicing to qualified service
personnel.
Do not expose this appliance to rain or moisture.
Do not install this product in hazardous areas where highly combustible or explosive products are stored or used.
Severe impact or vibration may cause malfunction.
Do not move this product when VPON is working.
Position it in an open space with flat surface, and also maintain at least 15 cm between the left and right sides of the
body and the wall.
The lightning flash/arrowhead symbol, within and equilateral triangle, alerts the user to the presence of a shock hazard within
the product’s enclosure.
GUARANTEE
Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform
FORMOSA21, INC. in Taiwan or your local distributor. FORMOSA21 cannot held responsible for any technical or
typographical errors and reserves the right to make changes to the products and manuals without your prior notice.
FORMOSA21 makes no warranty of any kind with regard to the material contained within this document, including, but not
limited, the implied warranties of merchantability and fitness for a particular purpose. FORMOSA21 shall not be liable nor
responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Important information
Before proceeding, please read and observe all instructions and warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty service.
When unpacking your VPON unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO
NOT INSTALLOR OPERATE THIS PRODUCT. Contact your dealer or us for assistance.
Contents
Contents
1.Overview
1.1 Introduction-----------------------------------------------------------------------------------1
1.2 Features-----------------------------------------------------------------------------------------------1
1.3 Product specifications---------------------------------------------------------------------------1
1.4 Front view ----------------------------------------------------------------------------------------2
1.5 Rear view ------------------------------------------------------------------------------------2
2.Operation and Configuration
2.1 VP-8000 Main Screen-------------------------------------------------------------------------------3
2.2 Functions---------------------------------------------------------------------------------4
2.3 Normal View---------------------------------------------------------------------------------5
2.4 Zoom---------------------------------------------------------------------------------------5
2.5 Overlay----------------------------------------------------------------------------------------6
2.6 Set Intelligent Function---------------------------------------------------------------------------------7
2.6.1 How to enable Alerts ------------------------------------------------------------------------------------8
2.6.2 Customizing the Intelligent Features -----------------------------------------------------------------8
2.7 Switch to Operation Mode / Admin Mode-------------------------------------------------------10
2.8 Record-----------------------------------------------------------------------------------------11
2.9 Schedule-----------------------------------------------------------------------------------------11
2.10 Events-----------------------------------------------------------------------------------------------------------13
2.11 Settings----------------------------------------------------------------------------------------------------------15
2.11.1 Camera -------------------------------------------------------------------------------------------------16
2.11.2 Login / Storage ----------------------------------------------------------------------------------------16
2.11.3 Network ------------------------------------------------------------------------------------------------17
2.11.4 Alert Message -----------------------------------------------------------------------------------------17
2.11.5 Video ---------------------------------------------------------------------------------------------------18
2.12 Shutdown----------------------------------------------------------------------------------------------------18
Chapter 1: Overview
1
Chapter 1. Overview
1.1 Introduction
The VP-8000 Intelligent Security System is a standalone video analysis system. Up to 4 cameras can
be connected to a single VP-8000 unit. Video can also be displayed on a local VGA monitor. VP-8000 is
independent to any Network DVR. The interface between VP-8000 and DVR is its built-in 4IN / 4OUT
GPIO pins.
This manual will guide you through the features and functions of the VP-8000 Intelligent Security
System. Read this section to get an overview of the product.
1.2 Features
Intrusion Detection
This feature detects objects entering a pre-defined area
Perimeter Defense
Objects crossing the virtual line from the pre-defined direction will generate the alert but NO alert
from the opposite direction.
Missing Object Detection
Removal of object from region of interest will activate the alarm
Unattended Object Detection
Objects left unattended for a pre-defined period of time will trigger the alarm
1.3 Product Specifications
Model VP-8000
Video Standard Support NTSC / PAL Composite video, BNC Connector
Video Input 4
VGA Output 24 bit true color
Internal HDD (250GB) 1
Sensor Input
Relay Output 4/4
Browser Compatibility Win 98 / 2000 / XP running MS IE 6.0 or above
Language English
Operating Temperature 0~45oC
Power Supply 115V / 230V, 250W
Size 426 mm x 426mm x 89.5 mm
Chapter 1: Overview
2
1.4 Front View
123 4 5
1 Reset switch 2 Power switch
3 HDD light and Power light 4 Cooling fans
5 Lock
1.5 Rear View
1 2
3 4 5 6 7 8 9 10
1 GPIO port 2 Video in ports (composite)
3 Power input 4 Keyboard and mouse ports (PS/2)
5 COM port (RS-232) 6 Printer port
7 VGA output 8 USB2.0 ports
9 LAN port 10 Audio input / Speaker output
Chapter 2: Operation and Configuration
3
Chapter 2. Operation and Configuration
Warning:
PLEASE DO NOT POWER ON VP-8000 WITHOUT HARD DISK UNDER ANY
CONDITION OTHERWISE THE SYSTEM WILL FAIL.
The license key of VP-8000 was bounded with motherboard, CPU, capture card, RAM and
hard disk. Any change of these components will result in system fail.
2.1 VP-8000 Main Screen
After power up successfully, you can see the main screen of VP-8000 in multiple camera view as
Fig. 2.1. You can get single camera view by clicking the “zoom” icon at the left bottom of main screen
to get Fig. 2.2 .
Fig. 2.1 Multiple camera view
Fig. 2.2 Single camera view
Chapter 2: Operation and Configuration
4
2.2 Functions
○
8
○
7
○
5
○
6
○
3
○
4
○
2
○
1
○
9○
10 ○
11 ○
12 ○
13
Fig. 2.3
No. Function Description
1 VP-8000 basic information Date and Time
2 Record To set up camera record schedule. It is NOT recommended to
use VP-8000 as a recording device as DVR.
3 Scheduler To set up date / time period for intelligent functions.
4 Events Click to bring up event list
5 Settings Click to bring up camera configuration dialog box
6 Stop/Start
Web server Web server is NOT available at current version
7 Shutdown Shuts down the VP-8000
8 Logo VPON
9 Normal View Show multiple camera view on main screen
10 Zoom Switch to single (selected) camera view on main screen
11 Overlay Toggle to show the pre-defined area for intelligent function
12 Set Intelligent Function Set the particular intelligent function for individual cameras
13 Switch to Operator Mode/
Switch to Administrator Mode Toggle between the “Operator” and “Administrator” modes
Chapter 2: Operation and Configuration
5
2.3 Normal View
Display 4 cameras video on main screen.
Fig. 2.4
2.4 Zoom
Click to get single (selected) camera view as Fig. 2.5
Fig. 2.5
Chapter 2: Operation and Configuration
6
2.5 Overlay
Click to toggle the overlay of user define area for alarm trigger on screen. Fig. 2.6 shows camera
videos with alarm areas. And Fig. 2.7 shows normal video
Fig. 2.6
Fig. 2.7
Chapter 2: Operation and Configuration
7
2.6 Set Intelligent Function
This feature allows each camera to be set with its own intelligent functionalities. Below is the screenshot
for the “Set Intelligent Function” console.
Fig. 2.8 – Set Intelligent Function Console
1. GPIO To set the length of alarm duration
2 SMS/MMS* To activate SMS/MMS alerts; Up to 3
mobile numbers (to be demarcated by
commas) can be keyed in to receive
the alerts. This function is NOT yet
available on current version
3. Email To activate email alert; receipt email
address to be keyed in
4. Enable/Disable Alert
Sound To activate and choose preferred
sound alert
5. Draw Object Box To display boxes around objects
during video preview
6. Draw ROI To display Region of Interest in video
preview
7. Draw Perimeter Line To display perimeter defense line in
vide preview
Table of contents
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual