Vivotek 4X-IP7133 User manual

This manual suits for next models

3

Table of contents

Other Vivotek Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Lumens

Lumens VC-A50PNW installation guide

EN - 1

English

Power off the Network Camera as

soon as it is found smoking or smelt

unusual.

Contact your distributor when such cases

happen.

Keep the Network Camera away from

the water. If the Network Camera is

wet, power off immediately.

Do not place the Network Camera

around the heat sources, such as

television or oven.

Refer to your user's manual for the

operating temperature.

Keep the Network Camera away from

direct sunlight.

Do not place the Network Camera in

high humid environments.

Contact your distributor when such cases

happen.

Warning Before Install

EN - 2

Do not place the Network Camera on

unsteady surfaces.

Do not touch the Network Camera

when it's lightening.

Do not disassemble the Network

Camera.

Do not drop the Network Camera.

Do not insert any object into the

Network Camera, such as needles.

EN - 3

English

Camera stand

IP7133 / IP7134

Warranty card

Screws

Quick installation guide

Power adapter

P

Package Contents

1

Software CD

EN - 4

Network Deployment

3

Physical Description

2

Front panel

Back panel

Status LED PPrivacy button

Lens

Built-in Microphone

ETHERNET

RESET

IO

1234

General I/O

terminal block

Indented reset button

Power cord socket Ethernet 10/100

RJ45 socket

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

3. Connect the supplied power cable

from the camera to a power outlet.

2. Connect the camera to a switch

via Ethernet cable.

●Use Catagory 5 Cross Cable

when Network Camera is directly

connected to PC.

1. If you have external devices such as sensors and alarms,

make connection from general I/O terminal block.

1: Power

2: Digital output

3: Digital input

4: Ground

EN - 5

English

MAC:0002D1533318

Assembled from tested components

Complete system not tested

FCC ID: RRK2005100093

!

IP7133

1. Install the "Installation Wizard 2" under the Software Utility directory from software CD.

2. The program will conduct analyses on your network environment. After your network is

analyzed, please click on the "Next" button to continue the program.

3. The program will search the VIVOTEK Network Devices in the same LAN.

4. After searching, the main installer window will pop up. Click on the MAC that matches the

one labeled on the bottom of your device to connect the Internet Explorer to the Network

Camera.

0002D1533318

Installation

Wizard 2

Assigning IP Address

4

5. Retrieve live video through web browsers or recording software.

EN - 6

For further setup, please refer to user's manual on the software CD.

Conﬁgure the Wireless Connection (IP7134 only)

5

1. Check the SSID currently set on your wireless access point (AP).

2. Go to IP7134's Conﬁguration > Wireless LAN.

3. Type in the SSID consistent with the setting on your AP.

4. Select the Wireless mode as "Infrastructure".

5. Click Save. The Network Camera starts to reboot.

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

ADSL/Cable/Hub

AP

6. Wait for the live image is reloaded to your browser. Then, unplug the power cable and

Ethernet cable from the Network Camera.

7. Replug the power cable to the camera. The Network Camera now operates in wireless

mode.

Note:

1. SSID, abbreviated from Service Set Identiﬁer, is the name assigned to the wireless

network. The IP7134's factory SSID setting is set to "default".

2. Select "Ad-Hoc" wireless mode if you want the IP7134 to communicate without using an

AP or wireless router.

P/N:625007400G