Vivo MOUNT-PC06L User manual

Large Under Desk PC Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-pc06l

SKU: MOUNT-PC06L

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

TOOLS NEEDED

WARNING!

A (x1)

Mount

B (x1)

Brace

C (x6)

Pad

W-A (x4)

ST4.8x16mm

Screw

W-B (x4)

ST4.8x38mm

Screw

W-C (x4)

Concrete

Anchor

T-A (x1)

3mm Allen

Wrench

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

Drill

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 1

Remove protective lm from Pads (C) and apply to Brace (B).

44 lbs

(20 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Pencil

Phillips

Screwdriver

STEP 2

STEP 3

Remove the Support Bar (B1) from Brace (B) using the 3mm Allen Wrench (T-A). Install the Support

Bar (B1) and Brace (B) onto Mount (A) using the previously removed hardware and 3mm Allen

Wrench (T-A).

Adjust assembled mount as needed to t your PC. This will help gauge the space consumed by the

mount when determining your desired mounting location.

DEPTH:

Loosen Set Screw (B2)

on Support Arm (B) and

slide to adjust to desired

PC depth, then retighten.

WIDTH:

Use a Phillips screwdriver to

loosen Set Screw (A1) on lower

Mount (A), then pull to adjust to

desired width and then retighten.

HEIGHT:

Pull and hold Side Pin (A2)

on Mount (A) and adjust to

desired height. Release pin

when necessary height is

reached.

T-A

CPU Maximum Height:

656mm/25.82”

INSTALLATION STEPS

Desk Mount

INSTALLATION OPTIONS:

Choose your desired installation method and follow appropriate steps below.

Desk Mount

Page 4

Wood Wall Mount

Page 5

Brick/Cement Wall Mount

Page 6

STEP 1

STEP 2

Hold Mount (A) up to desired mounting location and mark hole locations using a pencil. When

marking the keyhole locations, ensure to only mark the narrow section of the keyhole.

Drill 0.4” (10mm) deep holes using a 0.125” (3.5mm) drill bit. Using a Phillips screwdriver, partially

install two ST4.8x16mm Screws (W-A) in-line with the keyhole locations on Mount (A) leaving at least

a 4mm gap.

W-A

Wood Wall Mount

STEP 1

STEP 2

STEP 3

Hold Mount (A) up to desired mounting location and mark hole locations using a pencil. When

marking the keyhole locations, ensure to only mark the narrow section of the keyhole. Drill 1.5”

(38mm) deep holes using a 0.125” (3.5mm) drill bit.

Using a Phillips screwdriver, partially install two ST4.8x38mm Screws (W-B) in-line with the keyhole

locations on Mount (A) leaving at least a 4mm gap.

Hang Mount (A) over screws, making sure they are in the larger part of the keyhole openings. Slide the

mount toward the narrow keyhole opening to lock into place. The screw heads should now be holding

up the unit. Tighten the screws fully and install the remaining two ST4.8x16mm Screws (W-A) using a

Phillips screwdriver.

Proceed to Placing PC in

Mount step on page 7.

W-A

W-B

STEP 3

Hang Mount (A) over screws, making sure they are in the larger part of the keyhole openings. Slide

the mount toward the narrow keyhole opening to lock into place. The screw heads should now be

holding up the unit. Tighten the screws and install the remaining two ST4.8x38mm Screws (W-B) using

a Phillips screwdriver.

Concrete/Brick Wall Mount

STEP 1

STEP 2

Hold Mount (A) up to desired mounting location and mark hole locations using a pencil. When

marking the keyhole locations, ensure to only mark the narrow section of the keyhole. Drill 1.5”

(38mm) deep holes using a 0.25” (6mm) drill bit. Insert Concrete Anchors (W-C) into the drilled holes.

Using a Phillips screwdriver, partially install two ST4.8x38mm Screws (W-B) in-line with the keyhole

locations on Mount (A) leaving at least a 4mm gap.

Proceed to Placing PC in

Mount step on page 7.

W-B

W-C

W-B

Placing PC in Mount

ALL INSTALLATION TYPES:

STEP 3

Place your PC on Mount (A) and adjust the back brace and side support locations as needed.

Use 3mm Allen Wrench (T-A) to loosen the the Support Bar (B1) on Brace (B) and adjust the height to

clear any cables protruding from the PC.

Hang Mount (A) over screws, making sure they are in the larger part of the keyhole openings. Slide the

mount toward the narrow keyhole opening to lock into place. The screw heads should now be holding

up the unit. Tighten the screws and install the remaining two ST4.8x38mm Screws (W-B) using a

Phillips screwdriver.

W-B

DEPTH:

Loosen Set Screw (B2)

on Support Arm (B) and

slide to adjust to desired

PC depth, then retighten.

WIDTH:

Use a Phillips screwdriver to

loosen Set Screw (A1) on lower

Mount (A), then pull to adjust to

desired width and then retighten.

HEIGHT:

Pull and hold Side Pin (A2)

on Mount (A) and adjust to

desired height. Release pin

when necessary height is

reached.

LAST UPDATED: 05/11/2023

REV1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 