Vivo MOUNT-DLMM1 User manual

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

Mount Designed for Dell OptiPlex Micro

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-dlmm1

SKU: MOUNT-DLMM1

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual

and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect

assembly, or inappropriate use.

PACKAGE CONTENTS

WARNING!

A (x1)

Mounting Plate

TOOLS NEEDED

Phillips

Screwdriver

B (x1)

Locking Plate

D (x2)

Cable Strap E (x4)

Pads

C (x1)

Clamp

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

S-A (x1)

Thumscrew

S-B (x2)

M4x6mm

Screw

S-C (x8)

M4x10mm

Screw

S-D (x4)

M5x6mm

Screw

S-E (x4)

M4 Washer

S-F (x4)

M4 Nut

S-G (x4)

M5 Washer

ASSEMBLY OPTIONS:

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury. 5lbs

(2.4kg)

Desk Clamp

pg. 3-5

Allows micro PC to clamp

to a desktop surface with a

thickness of 10mm to 50mm.

VESA Plate

Monitor Arm

pg. 6-8

Mount installs between

monitor and monitor

mount arm.

VESA Plate

Freestanding Monitor

pg. 9-11

Utilizes VESA holes in

freestanding monitor to

hold micro PC

3

ASSEMBLY OPTION A: Desk Clamp

STEP 2

STEP 1

For Desktops with a 10mm to 40mm Thickness:

Dissemble Clamp (C) using a Phillips screwdriver. Turn Lower Clamp (C1) upside and reassemble

Clamp (C) as shown below.

*For Desktops with a 15mm to 50mm Thickness:

Proceed to Step 2.

C

C1

Choose desired mounting orientation and connect Mounting Plate (A) to back side of Clamp (C) at

desired height using M4x6mm Screws (S-B) and a Phillips screwdriver.

CA

S-B

4

STEP 4

Place assembly onto desktop and tighten hand bolt to secure.

STEP 3

Secure Locking Plate (B) to back side of Mounting Plate (A) using M5x6mm Screws (S-D),

M5 Washer (S-G), and a Phillips screwdriver.

AS-D

S-G

B

5

STEP 5

Attach Pads (E) to the PC to procect against accidental damage, then securely place the PC into

the mount. Secure using Thumbscrews (S-A).

Attach Cable Straps (D) to slots on underside of assembled mount to secure charging cord

power brick.

E

S-A

D

6

ASSEMBLY OPTION B: VESA Plate - Monitor Arm

STEP 1

STEP 2

Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x10mm Screws (S-C)

and M4 Washers (S-E) and a Phillips screwdriver.

Attach Locking Plate (B) to the front side of the VESA Plate from your monitor mount using M4x10mm

Screws (S-C), M4 Nuts (S-F) and a Phillips screwdriver.

A

S-C

S-F

B

S-C

S-E

7

STEP 3

STEP 4

Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-D), M5 Washers (S-G), and

a Phillips screwdriver.

S-D

S-G

B

A

Attach Pads (E) to the PC to procect against accidental damage, then securely place the PC into

the mount. Secure using Thumbscrews (S-A).

E

S-A

8

STEP 5

Attach Cable Straps (D) to slots on underside of assembled mount to secure charging cord

power brick.

Secure VESA plate to monitor mount using manufacturer guidelines.

D

9

ASSEMBLY OPTION C: VESA Plate - Freestanding Monitor

STEP 1

Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-D), M5 Washers (S-G),

and a Phillips screwdriver.

Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x10mm Screws (S-C)

and M4 Washers (S-E) and a Phillips screwdriver.

S-C

S-E

A

S-D

AB

S-G

10

STEP 2

Attach Pads (E) to the PC to procect against accidental damage, then securely place the PC into the

mount. Secure using Thumbscrews (S-A).

E

S-A