Vip-Vision SLR-B Series User manual
Version: VIPSLRB-Q123
Solar IP Camera System
SLR-B Series Quick Install Guide
Solar Surveillance Installation Manual - Version: VIPSLRB-Q123
2
1. Product Information
1.1 Included Components
Thank you for purchasing a VIP Vision Solar Surveillance System.
Below is a list of what is included with the standard Solar Surveillance System. Please note that
this can vary, depending on the customization options selected. Please refer to the included
conguration sheet for specic product details.
Solar Panel
Image
Panel Model 120 180
Panel Type 120W monocrystalline silicon panel 180W monocrystalline silicon panel
Conversion Rate Up to 21% eciency
Battery 12.8V/500Wh Lithium Iron Phosphate
(LiFePO4) w/ Low Voltage Cuto
25.6V/1200Wh Lithium Iron Phosphate
(LiFePO4) w/ Low Voltage Cuto
Dimensions 1321 x 525 x 161mm 1496 x 685 x 161mm
Panel Adjustment -60° ~ 60° tilt adjustable with angle compass
Ingress Protection IP65
Wind Resistance Up to 65m/s
Dimensions Ø50 ~ 60mm
Area Light
Light Module 50W LED (3030 Philips), 9400lm (180lm/W) 60W LED (3030 Philips), 11100lm (180lm/W)
Light Characteristics 145° x 100° (batwing) beam angle / 5700K cool white / 50,000hrs rated lifespan
Motion Detection Microwave motion sensor, Ø8 ~ 15m range (at 10m height)
Adjustable Settings Normal & Morning time periods / Brightness on motion / On-time delay / Brightness after delay
Light Adjustment -30° ~ +30° tilt adjustable LED module
Connectivity
Inclusions and
Optional Accessories
Solar CCTV Assembly (included)
Mounting kit with backing box and
triple-clamp pole mount (pole not incl.)
256GB MicroSD (included)
256GB surveillance grade microSD card
for footage recording
3G/4G LTE Modem Router (option)
LTE connectivity up to 150Mbps speeds
4G: FDD 700/900/1800/2100/2600; TDD
2300Mhz
*SIM card & service charges not included
5.8GHz Wireless Links (option)
2 x 5.8GHz wireless antennas
120° beam width, 25dBi gain
Pair congured as network bridge
Camera
Camera Options
4.0MP Mini AI PTZ Dome
2.8 ~ 12mm Motorised lens
31.6° ~ 96.9° (4x optical zoom)
Pan: 0° ~ 355° / Tilt: 5° ~ 90°
IP66 weather resistant
IK08 vandal resistant
Video analytics (tripwire etc.)
Perimeter protection to identify people & vehicles
3
1.2 Optional Mounting Components
4.5m Hinged Galvanised Pole
SLR-POL4.5H (Special order)
SLR-POL4.5H3
Includes 1 x Pole
Unassembled Solar Base
SLR-POLBASE
Includes 1 x Base, 4 x Mounting Bolts, 1 x Bolt
Template & 1 x Steel Reinforcement Cage
On-site assembly required
Concrete not included
Assembled Solar Base
SLR-POLCONC
Includes 1 x Base, 4 x Mounting Bolts, 1 x Bolt
Template, 1 x Steel Reinforcement Cage &
Concrete
Assembled o-site
Below are optional mounting components; please contact your supplier for more information.
Solar Surveillance Installation Manual - Version: VIPSLRB-Q123
4
120W/180W Solar Panel with Motion-Sensing Street Light
This solar panel system is tted with undervoltage protection, which disconnects the load at approximately 10.8V
(SLR-B120) or 21.6V (SLR-B180). If you are not receiving any voltage on the output wires, place the panel in direct
sunlight for a minimum of one hour and re-test.
The output will be reconnected automatically when battery voltage reaches approximately 11.5V (SLR-B120) or 23.0V
(SLR-B180). For more information on panel conguration, refer to Section 4.
The solar panel must be installed in direct sunlight. Shade will negatively impact performance.
This solar panel includes a motion-activated LED light. For more information, refer to Section 4.
1.3 Solar Panel Information
5
Solar Panel Assembly Diagram
Lamp Arm
Bird Spikes
1.3 Solar Panel Information (continued)
Accessories
# Component
1Solar panel
2LED light
3Microwave sensor &
RF receiver
4Lamp arm
5Safety rope
6Bird spikes
7Screws
Solar Surveillance Installation Manual - Version: VIPSLRB-Q123
6
The camera has been pre-installed with a 256GB microSD card and has been precongured to record at its maximum
resolution.
The username and password details for the camera can be found on the conguration sheet inside the junction box.
The default username is admin.
To prevent unauthorised access, ensure you change the admin password before completing installation.
Default Camera Conguration
Main Stream
Stream Type General
Encode Type H.265
Resolution Camera max
FPS 15
Encoding Method Constant Bit Rate
Quality N/A
Bit Rate 1536-8192Kbps
I Frame Interval 30
Sub Stream
Stream Type General
Encode Type H.265
Resolution D1 (704 x 576)
FPS 15
Encoding Method Variable Bit Rate
Quality 6 (Best)
Bit Rate 512Kbps
I Interval 30
1.4 Camera Information
7
2. Installation
2.2 Installing the Optional Base
Warning: The pre-assembled base weighs approximately 500kg. Specialist lifting equipment is required to move
the base. Care must be taken to prevent injury when moving the base.
1. Locate a hard level surface to install the base, ensure that there is easy access for the lifting equipment that will be
required, and that it is free from objects that will shade the solar panel, such as trees or buildings.
2. Using lifting equipment, position the base on the ground.
Pre-Assembled Base:
It is strongly recommend to have a minimum of two people performing installation of the solar panel, base, and pole.
Required Install Tools: 5mm & 6mm Allen keys for junction box (included), 5mm, 6mm & 8mm Allen keys for solar
panel, 20mm hole saw, battery drill, phillips screwdriver, at head screwdriver, lifting equipment, padlock with key,
large adjustable spanner.
A laptop with RJ45 network interface is strongly recommended for camera setup.
2.1 Installation Prerequisites
For more information and videos regarding base and pole installation, please visit the below website.
https://help.c5k.info/solar-installation
Solar Surveillance Installation Manual - Version: VIPSLRB-Q123
8
Un-Assembled Base:
1. Locate a hard level surface to install the base, ensure that it is
free from objects that will shade the solar panel, such as trees
or buildings.
2. Install the reinforcing cage inside the base. Install a washer and
nut on each threaded rod on the top side of the base, to secure
the cage. (Fig. 2.2a)
4. Mix approx 480kg of concrete, and pour into base. Ensure
the concrete that is exposed is level with the top of the base,
otherwise the base will not sit level on the ground. (Fig. 2.2c)
5. Allow a minimum of 7 days for the concrete to cure, this can
take longer depending on weather conditions.
6. Once the concrete has cured, use suitable lifting equipment to
turn the base over
3. Place the base open side up, on top of a solid object such as
concrete besser blocks. (Fig. 2.2b)
2.2 Installing the Optional Base (continued)
Fig. 2.2a
Cage installed
Fig. 2.2b
Base on blocks
Fig. 2.2c
Concrete curing
9
2.3 Installing the Optional Tilt Pole
Warning: The tilt pole weighs approximately 100kg. Care must be taken to prevent injury when installing the pole.
1. Attach a lifting sling to the hinged part of the pole.
2. Unhinge the pole and position the pole base over the 4 threaded studs.
3. Install the included washers and nuts. Ensure the nuts are fastened securely.
4. Refer to Section 2.4 - 2.8 to mount the camera and solar panel to the pole. After the steps have been followed
continue with the steps below.
5. Using lifting equipment, raise the pole.
6. Once the pole is vertical, secure it into position with the included bolt and nut.
7. Using a padlock, lock the pole.
8. Re-tighten the nuts on the pole base.
Fig. 2.3a
Mounting pole onto concrete base
Fig. 2.3b
Pole fixed onto on concrete base
Solar Surveillance Installation Manual - Version: VIPSLRB-Q123
10
1. Drill an 20mm hole in the pole (minimum
15cm down from the top of the pole) on the
same side that the camera will be mounted.
This is for the solar panel cable and plug
to run through. The position of the hole will
vary depending on what position on the
pole the camera is to be mounted. If using
the optional tilt pole, this hole will be pre-
drilled,
2. Feed the power cable and plug connected
to your solar panel through the hole.
3. Place the solar panel bracket on top of the
pole, pointing north.
• Note: If you need to cover a different area
with the light beam, keep the panel at after
repositioning.
4. Securely fasten the included grub screws
to the bracket. Tighten the locking bolts to
prevent the grub screws from loosening.
(Fig. 2.4b)
• Note: For poles greater than 4m in height,
tapered poles are preferable for camera
stability and pole strength.
20mm
Fig. 2.4a
Solar panel power cable hole location
Fig. 2.4b
Installed grub screws
Caution: Solar panel must be placed so it is in direct sunlight all day.
Any shading will greatly reduce the solar panel’s performance.
2.4 Mounting the Solar Panel to the Pole
Other manuals for SLR-B Series
3
This manual suits for next models
4
Table of contents
Other Vip-Vision Security Camera manuals
Vip-Vision
Vip-Vision Solar Series User manual
Vip-Vision
Vip-Vision VDIRM Series User manual
Vip-Vision
Vip-Vision VSIP2MPVDIRFV2 User manual
Vip-Vision
Vip-Vision SLR-B Series User manual
Vip-Vision
Vip-Vision VDIRME Series User manual
Vip-Vision
Vip-Vision SLR-B Series User manual
Vip-Vision
Vip-Vision Panoramic Series User manual
Vip-Vision
Vip-Vision FBIR Series User manual
Vip-Vision
Vip-Vision VSIP12MPFEIRV2 User manual
Vip-Vision
Vip-Vision VDIRME Series User manual
