VigilLink VL-IPC265-1 User manual
VL-IPC265-1
Video over IP Controller
VER 1.0
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating, or adjusting this product. Please keep this manual
for future reference.
A surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shocks, lightning strikes, etc. The use of
surgeprotection systems is highly recommended to protect and extend the
life of your equipment.
Table of Contents
1. Introduction..........................................................................................
1
2. Features................................................................................................
1
3. Package Contents...............................................................................
1
4. Specifications. .....................................................................................
2
5. Operation Controls and Functions. ....................................................
2
5.1 Front Panel......................................................................................
2
5.2 Rear Panel. .....................................................................................
3
5.3 IR Pin Definition...............................................................................
4
6. Rack Mounting Instruction. .................................................................
4
6.1 6U Rack Mounting..........................................................................
4
6.2 1U Rack Mounting..........................................................................
6
7. Web GUI User Guide............................................................................
7
7.1 Preparation before Entering the System.......................................
7
7.2 Functions and Operation. .............................................................
11
8. Application Example...........................................................................
26
1/29
1. Introduction
This Video over IP Controller is used to control and manage IP products. It
supports dual 1G network ports, which can realize dual-network isolation of
the Control network and Multicast video distribution network. It supports
Web GUI/TCP/RS-232/IR/GPIO controls, POE function, and IR control
signal passthrough as well. Since the demand for IP products is daily
increased in the current market, the IP Controller will be widely applied in
more and more different scenarios.
2. Features
☆Easy to create projects, control, and manage the system
☆HTTPS, SSH, SFTP security compatible
☆Built-in Web GUI control interface, supporting Drag & Drop operations
☆Support image preview
☆Support video, audio, RS-232, IR, KVM control, and management of the
distributed system
☆Dual network ports (VIDEO LAN port supports POE function) to isolate
Controls and Multicast networks.
☆Support LAN/RS-232 port control and third-party central control
☆Support IR signal receiving (3.5mm audio jack, 12V level)
☆4 channel GPIO control ports (5V/12V optional level)
☆Multiple circuits protection, lightning protection, and ESD design
☆Reliable system design, ensuring 7*24 hours reliable and stable work
3. Package Contents
①1 ⅹVideo over IP Controller
②1 ⅹ20kHz-60kHz 12V IR Receiver Cable (1.5 meters)
③1 ⅹIR Blaster Cable (1.5 meters)
④2 ⅹ3-pin 3.81mm Phoenix Connector (Male)
⑤1 ⅹ6-pin 3.81mm Phoenix Connector (Male)
⑥ 2 ⅹ Mounting Ears
⑦ 4 ⅹ Machine Screws (KM3*6)
⑧1 ⅹ12V/1A Locking Power Adaptor
⑨1 ⅹUser Manual
2/29
4. Specifications
Technical
Network Video
Bandwidth Up to 1G
Transmission
Distance 100m CAT 5E/6/6A/7
Control Ports
2 x 1G LAN [RJ45 connector] [VIDEO LAN support POE]
1 x IR IN [3.5mm audio jack, 12V level]
1 x IR OUT [3.5mm audio jack]
1 x DIGITAL I/O [6-pin 3.81mm phoenix connector]
2 x RS-232 [3-pin 3.81mm phoenix connector]
1x USB Host [Micro USB, 5-pin female]
Dimensions
204mm(W)×98.5mm(D)×21.5mm(H)
Housing
Metal Enclosure
Color
Black
Weight
508g
Power Supply 12V/1A
Power Consumption
8.4W
Operating
Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90% RH (non-condensing)
5. Operation Controls and Functions
5.1 Front Panel
3/29
No.
Name
Function Description
1RESET Button
Press and hold this button (about 10 seconds) until Status
LED starts flashing, Controller will be reset automatically.
2
POWER LED
The red LED will light on when the Controller is powered on.
3
STATUS LED
The status LED will flash in yellowish-green every 1 second
until the Controller boots up completely and Control LAN is
ready, then it becomes solid.
4
UPDATE
Firmware update port.
Note: Must keep no connection on this port when Controller
works in normal mode.
5.2 Rear Panel
No.
Name
Function Description
1
DC 12V
DC 12V/1A power input port.
2VIDEO LAN
(POE)
1G Video LAN port, supporting POE function.
Note: When POE is enabled, DC 12V/1A power supply is
not required.
3CONTROL
LAN
The TCP/IP control network port.
4
3-pin Phoenix
Connectors Two identical RS-232 serial communication ports.
56-pin Phoenix
Connector
4 channel I/O level outputs, 1 channel grounding,
1 channel power supply (supports up to 12V/0.5A) to the
outside.
6IO LEVEL
DIP Switch
Used to control I/O level output and VOUT voltage.
Switch to left: 5V I/O level output, VOUT is 5V.
Switch to right: 12V I/O level output, VOUT is 12V.
7
IR IN 12V IR signal input port.
8IR OUT IR signal output port. (Reserved for future use.)
4/29
5.3 IR Pin Definition
5/29
6. Rack Mounting Instruction
6.1 6U Rack Mounting
This Controller can be mounted in a standard 6U rack (Please contact your
supplier for a 6U rack sale). The mounting steps are as follows:
Step 1: Use included screws to fix two mounting ears on the Controller, as
shown in the figure below:
Step 2: Insert the Controller with mounting ears into a 6U rack (up to 10units
can be installed vertically), as shown in the figure below:
6/29
Step 3: Use screws to fix mounting ears on the rack to complete
themounting, as shown in the figure below:
6.2 1U Rack Mounting
This Controller also can be mounted in a standard 1U rack (up to 4 units can
be installed horizontally). The mounting steps are as follows:
Step 1: Stack two Controllers on top of each other, then use included screws
to fix two 1U rack panels on the Controllers, as shown in the figure below:
7/29
Step 2: Fix two 1U rack panels on another two stacked Controllers in the
same way, then use screws to fix two 1U rack panels together, as shown
in the figure below:
Step 3: Fasten screws between two 1U rack panels, so that four Controllers
are mounted in a 1U rack, as shown in the figure below:
8/29
7. Web GUI User Guide
7.1 Preparation before Entering the System
You can use Controller’s Web GUI to control all IP products at the Switch.
The operation method is shown below:
Step 1: Input the Controller’s default IP address (192.168.0.225) or the URL
(http://controller.local) into the Web browser address bar on the PC to enter the
Web GUI login interface.
Table of contents
Other VigilLink Controllers manuals
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
