Victrola ITSBL-547 User manual
Model: ITSBL-547
Instruction Manual
Groovy Lamp
Bluetooth Speaker
PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE
AND KEEP IT FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART
INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
.
DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol
within an equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING:
USE UNDER SUPERVISION OF AN ADULT DUE TO
LONG CORD This unit has a long cord that can be easily tripped on or pulled
on, causing injury. Please make sure it is arranged so that it will not drape over
a tabletop, etc. Where it can be pulled on by children or tripped over accidentally.
Before using the unit, be sure to read all operating instruction carefully, please
note that these are general precautions and may not pertain to your unit. For
example, this unit may not have the capability to be connected to an
outdoor antenna.
1. Read these instructions - All the safety and operating instructions should
be read before the appliance is operated.
2. Keep these instructions - The safety and operating instructions should be
kept for future reference.
3. Heed all warnings- All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow all instructions - All operation and use instructions should be
followed.
1
5. Do not use this apparatus near water - The appliance should not be used
near water; for example, near a bath tub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool.
6. Clean only with dry cloth - The appliance should be cleaned only as
recommended by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. - Slots and openings in the cabinet and in the
back or bottom are provided for ventilation, to ensure reliable operation of
the product and to protect it from overheating. These openings must not
be blocked or covered. The openings should never be blocked by placing
the product on a bed, sofa, rug, or similar surface. This product should
never be placed near or over a radiator or heat source. This product should
not be placed in a built-in installation, such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide
or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
An appliance and cart combination should be moved with
care. Quick stop, excessive fore and uneven surfaces may
cause the appliance and cart combination to overturn.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time. - To protect your product from a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
2
Portable Cart Warning
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Power source - This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your appliance dealer or local
power company. For products intended to operate from battery power, or
other source, refer to the operation instructions.
16. Power lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
17. Overloading - Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
18. Object and liquid entry - Never push objects of any kind into the product
through openings as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any
type of liquid on the product.
19. Service - Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
20. Replacement parts - When replacement parts are required, be sure the
service technician uses replacement parts specified by the manufacturer
or those that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire or electric shock or
other hazards.
21. Safety check - Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
22. Damage requiring service
Unplug this product from the wall outlet and refer service to qualified
service personnel under the following conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment of other controls may result in
damage and will require extensive work by a qualified technician to
restore the product to its normal operation.
e) If the product has been dropped or the cabinet has been damaged.
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
3
CARE AND OPERATION
During the initial warm up of the lamp, the heat coil in the base may tend to
stand on the end or float to the top of the lamp. If this happens, keep your
lamp operational for 4 or more hours to allow the waxy material to melt
completely. The coil should automatically drop down to its correct position in
the base of the lamp. If the coil does not drop down, shake the vessel gently
in the base and the coil will drop.
The lamp is designed to operate in an average room temperature of 22-25℃
(72-77°F), make sure the lamp is at room temperature before starting. Always
operate the lamp on a firm, flat and stationary surface. Do not operate the
lamp on any warm or hot surfaces.
Initial warm up of the lamp will take 3 to 5 hours. Subsequent warm ups will
take less time depending on the room temperature. The lamp will function
best if it is operated no longer than 10 hours at a time. The lamp’s function
will be achieved fully after lamp has been used 5-6 times.
CAUTION:
�The lamp should never be operated for more than 24 hours at a time. If
operated for more than 24 hours, the base can get deformed from heat.
�Do not add any fluid or solids to your lamp. The air space at the top of the
lamp has been provided to allow for expansion.
�Do not place near sources of heat or cold such as heat and air conditioning
vents. Always operate the lamp only at room temperature. Operation or
storage of lamp in direct sunlight will cause colors to fade.
�The lamp operates at a very high temperature and the vessel is made
of glass.
�Operate out of the reach of the children and pets.
�The color hue of the “wax” will mellow after about 10 to 20 hours of
continuous operation.
4
CAUTION:
�Do not operate the lamp wireless speaker with any other bulb except for the
one provided by this manufacturer’s customer service.
�
Do not leave lamp unattended. Do not run the lamp while sleeping, as this is
novelty item and it is not intended to be used as night light.
�Do not replace with unauthorized bulb in this lamp.
�The lamp and speaker base will be hot while in use and after the unit has
been turned off/unplugged. Do not touch the lamp while it is on.
�Keep it out of the reach of the children and pets.
�While lamp is in operation, be sure not to move or shake it in order to avoid
permanently damaging the lamp. Lamp should never be heated by any
other means, nor should it be cooled artificially. Do not use when the glass
is cracked or damaged.
�The space on the top of the lamp is provided for expansion. Do not break
the seal of the cap to fill it with liquid or solid. Breaking the seal will void
your warranty and ruin the product.
�If the external flexible cable or cord of the base is damaged, do not attempt
to replace it yourself. It should be replaced by the manufacturer, service
agent or a similar qualified person in order to avoid a hazard.
IMPORTANT SAFETY INSTRUCTIONS /
INSTRUCTIONS IMPORTANTES DE SÉCURITÉ
This portable luminaire has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be fully inserted. Do not alter the
plug.
Ce luminaire portable a une prise polarisée (une lame est plus large que
l'autre) comme une caractéristique pour réduire le risque d'électrocution.
Cette prise s'adaptera à une sortie polarisée d'une manière unique. Si la fiche
ne rentre pas complètement dans la prise, inversez la fiche. Si cela ne
correspond pas toujours, contactez un électricien qualifié. Ne jamais utiliser
avec une rallonge à moins que la fiche ne soit complètement insérée. Ne
modifiez pas la fiche.
5
PRODUCT OVERVIEW
DANGER
● Do not replace with unauthorized bulb in this lamp speaker.
● The lamp and speaker base will be hot while in use and after the unit has
been turned off/unplugged. Do not touch the lamp speaker or the bulb while
it is on.
● Keep it out of the reach of the children and pets.
● Do not take the glass vessel out although it can be taken out from the
speaker base!
● Do not put your fingers into the bulb cave, it is very hot, the temperature can
reach up to above 100℃ (212°F).
● Do not stare at the bulb cave, it may hurt your eyes.
● Unplug the speaker if you want to take out the glass vessel, and wait until
the base, bulb cave and glass vessel cools down to room temperature.
NOTE: BE CAREFUL!
- THE GLASS VESSEL IS FRAGILE.
-
THE GLASS VESSEL, AND SPEAKER BASE ARE BOTH VERY HOT WHEN
IN USE AND SHORTLY AFTER USE.
6
1
2
3
Front
5
Right side Back
46
1 Vessel Cap
2 Glass Vessel
3 Speaker
4 Speaker On ( ) /
Off /
Speaker + Light ( )
5 3.5mm Aux-In
6 AC Power Plug
BLUETOOTH OPERATION
1. Plug the power plug into the wall outlet with power supply of 120V~60Hz.
2. Switch the Right side button on “ Speaker on” or “Speaker & light on”
position.
3. Turn on the Bluetooth on your external Bluetooth device and select the
pairing name “ITSBL-547” from your device’s Bluetooth settings.
4. The speaker will sound an audible tone and the Bluetooth indicator will stay
lit after successful connection.
5. The speaker will automatically pair and connect with the last paired device if
both the device and the speaker are activated and in range.
6. If using AUX, connect the included AUX cable to the port on the side.
Then connect the 3.5mm auxiliary jack at the other end of the cable to your
device's audio jack.
Please Note: If the speaker is
not connected to a device for an extended
period of time, you may need to turn off the speaker, then back on to
reconnect your bluetooth device.
7
WARNING!
DO NOT TOUCH the Lamp while in use, it is
VERY hot. Before touching make sure the
Lamp has cooled down to room temperature.
TROUBLESHOOTING GUIDE
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
Can’t Power On
No Sound or
Weak Sound
Sound
Distortion
Bluetooth is
not working
Lamp is not
illuminated.
Power switch is in “OFF”
position.
Volume level of the paired
device is too low.
Volume level of the paired
device is too high.
The external Bluetooth
device is too far from the unit.
Bulb is loose.
Bulb is burnt out.
The external Bluetooth device
is not paired to the unit.
Increase the volume of
paired device.
Decrease the volume of
paired device.
Pair the external Bluetooth
device to the unit.
Bring the external Bluetooth
device closer to the unit.
Make sure lamp is cool, and
screw the bulb in tighter.
Make sure lamp is cool, and
replace the bulb with -
R39Reflector SpotlightE17
120V/30WStandard Bulb
Switch the power switch to
“ON” position.
8
For questions, please contact Customer Service at 1-877-483-2497.
IMPORTANT INFORMATION
SPECIFICATIONS
CALIFORNIA PROP 65 WARNING
WARNING: This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
User-Maintenance Instructions
Danger of electroshock! Do not immerse the appliance in water or in other
liquids.
1. Any other servicing is to be performed by an authorized representative.
2. Wipe the housing with a dry, soft cloth.
3. Do not use petrol, alcohol or other abrasive cleaners to clean the device.
4. Always disconnect the power plug from wall outlet before storage.
9
POWER SOURCE .................................................................... AC 120V~60Hz
AUDIO OUTPUT .......................................................................................1X3W
BLUETOOTH RANGE .......................................................................33ft (10m)
BULB LIFE ........................................................................................... 2000hrs
BULB FLUX ...............................................................................................90 lm
BULB POWER............................................................................................ 30W
BULB TYPE ................. R39Reflector SpotlightE17 120V/30WStandard Bulb
Please note: As a result of continual improvements, the design and
specifications of this product are subject to change without notice.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Made in China.
Table of contents
Other Victrola Speakers manuals
