Verano V360 User manual
INSTALLATION MANUAL
AWNING V360 - ST. TROPEZ
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
1
Subject to misprints, errors and technical modifications.
* The displayed awning is the electrical version.
Content
1. Awning
2. Wall supports
3. Control
a) Manual controle: Crank handle
b) Electrical: Switch and plug
c) Remote controlled: Remote control and plug
1
2
2
2
Necessary tools
• Drilling machine
• Masonry drill 10/14 mm
• Crosshead screwdriver
• Socket wrench 10/13/17
• Allen keyset
• Tapeline
• Level
• Pencil
In case of electrical control:
• Nippers
• Flathead screwdriver
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
2
Subject to misprints, errors and technical modifications.
Specications V360 St. Tropez
0cm
100
cm
200
cm
300
cm
20º
35º
Projection 250cm
200cm
300cm 350
cm
5º
Projection
Wall mounting Sizes in mm
Front view wall support
Top view ceiling support
Awning section
Awning section
Ceiling mounting
Minimal width per fabric projection
Projection [mm] Manual control [mm] Electrical control [mm]
1500 2-Armen 2060 2040
2000 2-Armen 2620 2610
2500 2-Armen 2850 2800
3000 2-Armen 3380 3330
3500 2-Armen 3870 3820
2500 3-Armen 4250 4200
3000 3-Armen 5050 5000
3500 3-Armen 5780 5730
2500 4-Armen 5600
3000 4-Armen 6660
3500 4-Armen 7640
Wall support scheme
1700
2200
2700
3200
1500
2000
2500
3000
Fabric
type
Fabric
length
[mm]
Projec-
tion
[mm]
Width [mm] Required number of wall supports
2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 8000 9000 10000 11000 12000
Dickson
Dickson
Dickson
Dickson
3500 3500
Dickson
2 2 2 3 3 3 4 4 4 5 5 6 6 7 8
2 2 3 3 3 4 4 5 5 6 6 7 7 8
2 2 3 3 4 4 4 5 5 6 7 7 7 8
3 3 4 4 4 5 5 5 6 7 7 8 8
4 4 4 4 5 5 6 7 7 8 8 8
197
1817054
243
19
71
80
170
45 45
90
20
14
89
57,7
144
127,5
44,5
Back cover is optional
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
3
Subject to misprints, errors and technical modifications.
Important before mounting
1
2
3
4
5
rollaag
min. 30 cm
Patio door
When the awning is fully open, it hangs down under the angle. Therefore we advise to keep at least 30 centimeters
between the window frame and the awning in a situation with patio doors to the outside. When possible, it is advisable to
hang the awning higher than 30 centimeters above the window frame.
General warning
Installation of the Verano® product yourself is at your own risk. Only use this instruction as a tool and for the installation
of this specic Verano® product. If you cannot install the product yourself, you can always opt for professional installation.
The installation team of Verano® is pleased to help you.
Be careful for damages
Don’t use a knife or any other sharp object when opening the packing. This may cause damage to the content of the
package. Put the content of the package on a so surface. Be careful when drilling, falling drill cuttings can cause damages.
Check that the window frame or façade is at.
Check the installation height
Make sure that you have enough installation height on your façade to place the awning. Above the wall support
(mounting support) have to be 5 rows of stones to prevent to much pressure on the façade. This is not oen the case with
a house-extension. It is recommended to drill the installation hole in the h stone (minimum) measured from the top.
Wall strips
When there are fewer than ve rows of stones above the wall support, wall strips have to be used. These strips divide the
forces over a bigger wall surface when the walls are to weak. View page 5 for extensive instructions.
Attention! Make sure there is no installation point in the soldier course. These are oen half stones.
Soldier course
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
4
Subject to misprints, errors and technical modifications.
1.1 Marking the holes
View the stickers on the back side of the awning. See gure 1.1.
The wall supports need to be placed where the stickers are located.
The remaining wall supports should be equaly divided between the two outer supports.
Mark the drill holes of the wall supports (A) and, if necessary, the center support (B) on the wall. The holes need to be
levelled aligned both horizontal and vertical. See gure 1.2.
Make sure that at least two of the four installation holes per wall supports are located in the middle of the stone.
See gure 1.3. If necessary, use an alignment cord.
When the back cover is used you must also mark the wall supports on the back cover. Use the same measurements
between the wall supports as you used on the wall.
g. 1.2 Placing the wall supports
g. 1.1 Location stickers
middensticker sticker
A
muursteun
A
muursteun
X
A
muursteun
1. Installation of the wall supports
W = width of the awning
Y = window frame height plus a minimum of 30 cm
A = wall supports
X
Y
AAA
X
AAA
W = width of the awning
center
wall support wall support wall support
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
5
Subject to misprints, errors and technical modifications.
1.3 Drilling the control hole
If you want to connect your wall control on the inside, measure the place of the control hole carefully. This depends on
your personal preference and situation.
Drill inwards with a 10 millimeter drill. When drilling through the wall, it is advisable to place a shelf against the inner side
of the wall to prevent damages to the wall.
g. 1.3a Installation of wall support
g. 1.3b Installation of back cover and wall support
1.2 Drilling the holes
Drill the installation holes. Our advise is to drill with
a 14 millimeter masonry drill in case of a wall made
of concrete or stone. Use matching plugs and bolts of
high quality. Install the wall supports (A) and, if necessary,
the center support(s) (B) and tighten the bolts.
See gure 1.3a.
When the back cover is used, also drill the holes in the
back cover. Install the back cover together with the wall
supports (A). See gure 1.3b.
1.4 Extra wall support weak wall
If there are less than ve rows of stones above the installation location, extra wall supports are needed.
The extra wall supports divide the power over a larger wall surface. This way the wall can carry more weight.
See gure 1.4.
extraextra
g. 1.4 Applying extra wall supports
A
A
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
6
Subject to misprints, errors and technical modifications.
2.1 Placing the awning
Hang the awning in the wall supports. See gure 2.1 and 2.2.
2.2 Securing the awning
Lock the wall supports by using the included locking bolts. See gure 2.3.
Attention! The awning may not be opened before the locking bolts are applied!
2. Installation of the awning
g. 2.2 Detail wall support
g. 2.1 Placing the awning
g. 2.3 Applying the locking bolts
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
7
Subject to misprints, errors and technical modifications.
3. Electrical wall control
TIP! Sealing the hole
In case of an electrical wire to the inside, we advise to seal the hole where the wire comes in. This to prevent moisture from
running inwards. Attention! Do this both on the in- and outside.
3.2 Standard factory setting
The motor control is set standardly.
See the included manual of the motor and the possible remote control.
g. 3.1 Motor le (seen from the outside) g. 3.2 Motor right (seen from the outside)
3.1 Connecting the wall control
1. Check the position of the motor (le or right), seen from the outside!
2. If you have inside control, rst guide the cable through the hole in the wall you drilled before.
3. Connect the four-wired cord of the motor and the three-wired cored with plug following the scheme below.
4. Put the plug in the power point.
5. The awning is now connected. Before you continue the installation, check if the awning rolls out correctly.
geel/groen
blauw
bruin
geel/groen
blauw zwart
bruin
bruin
geel/groen
blauw
bruin
geel/groen
blauw
zwart
bruin
bruin
geel/groen
blauw
bruin
geel/groen
blauw zwart
bruin
bruin
geel/groen
blauw
bruin
geel/groen
blauw
zwart
bruin
bruin
brown
brown
brown
brown
brown
brown
black
black
blue
blue
blue
blue
yellow/green
yellow/green
yellow/green
yellow/green
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
8
Subject to misprints, errors and technical modifications.
4.1 Connecting the remote control
1. If the power point is located on the inside, rst guide the wire through the hole in the wall you drilled before.
2. Install the plug according to the color scheme below:
Brown 220V power supply
Blue 220V power supply
Yellow/green grounding
Black (do not connect)
White (do not connect)
Orange (do not connect)
3. Put the plug in the power point.
4. The awning is now connected. Before you continue the installation, check if the awning rolls out correctly by using the
remote control.
TIP! Sealing the hole
In case of an electrical wire to the inside, we advise to seal the hole where the wire comes in. This to prevent moisture
from running inwards. Attention! Do this both on the in- and outside.
4. Remote control
INSTALLATION MANUAL AWNING V360 - ST. TROPEZ
13080130-190906EN
9
Subject to misprints, errors and technical modifications.
21 3
1
2
3
5.1 Standard factory setting
The passage height for the front bar is standard set between 1,80 and 1,90 meter at an installation height of 2,70 meter.
5.2 Setting the pitch
If you want to set the awning dierent from the standard factory setting, please follow the steps below:
1. Unroll the awning completely. The arm-connections are located le and right at the beginning of the folding arms
(on the side of the box). See gure 5.1.
2. Loosen nut #1 with one stroke (wrench 17). Li the front bar during the twisting, this way the set bolt moves easily.
See gure 5.2.
3. Completely turn out hexagon bolt #2. Then turn allen bolt #3 for the adjustment.
Le = front bar moves up, right = front bar moves down.
4. Repeat step 3 on the other side until the front bar is level.
5. WHen the front bar is at the desired height, put allen bolt #2 back in place and tighten nut #1.
Attention! Never touch the nuts with a red cross.
g. 5.2 Detail le arm-connection
g. 5.1 Location arm-connections
5. Pitch
Table of contents
Other Verano Accessories manuals
Verano
Verano VERANDA V905 - ISEO User manual
Verano
Verano V124 - CALPE User manual
Verano
Verano Mallorca Special V150 User manual
Verano
Verano V805 CORTONA User manual
Verano
Verano V255 Salou User manual
Verano
Verano V612 HAMAR User manual
Verano
Verano V480 Cannes User manual
Verano
Verano V160 Florence User manual
Verano
Verano V460 SANTANDER User manual
Verano
Verano V124 - CALPE User manual
