USX-MOUNT XTM090-15 User manual
For 26-60" TV
XTM090-15/WTM009-01
INSTRUCTION MANUAL
C0
If you have any questions along the way, just message to us.
We’re ready to help!
R
2
Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
5
Does your TV
(including accessories)
weigh MORE than
99 lbs. (45 kg)?
What is your
wall made of?
Do you have
all the tools
needed?
(NOT INCLUDE) Tape
Measure
CAUTION
Pencil Screw
driver
Electric
Drill
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Drywall with
wood studs? CAUTION:
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
Solid concrete ?
3/8 in.
(10 mm)
Socket
Wrench Stud
Finder
1/8 in.
(3 mm)
Wood
Drill Bit
● This product is designed for use in wood stud, solid concrete walls - DO NOT install into drywall alone
● The wall must be capable of supporting five times the weight of the TV and mount itself
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Unsure?
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
MAX:400mm/15.75"
(MIN:75mm/2.95")
MAX:400mm/15.75"
(MIN:75mm/2.95")
DO NOT
install into
drywall alone
99 LBS
(45 kg)
CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS
!
!
Per fect !Per fect !
Wood Stud Install
Concrete Install
Message to us via Amazon.
!
3
TV INTERFACE WALL PLATE
SIDE VIEW
203.2mm/8"
406.4mm/16"
164mm/6.46"
Dimensions
MAX:400mm/15.75"
MIN:75mm/2.95"
MAX:400mm/15.75"
MIN:75mm/2.95"
222mm/8.74"
435mm/17.13"
SIDE VIEW
0~-9°
33mm/1.30"
417mm/16.42"
4
TV Brackets
Wall plate
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
Parts and Hardware
!
02 x2
01 x1
5
Parts and Hardware for STEP 2
TV Screws
Lag Bolt
ST6x60mm
Level
Washers
M6
A1 x4
M6x15mm
M4x30mm
M6x30mm
x4
x4 x4
M8x45mm
Spacers
10mm
x4
D1
E2
D2
F
M8x15mm
x4
E1
x4
A2
Washers
M6
x4
B1 x8
B2
x1
B3
Spacers
5mm
x8
C
Contact us at telephone 1-800-460-0956 or
message to us to have these additional pieces
shipped directly to you.
Concrete Wall Anchor
Ø10x50mm 4pcs
Concrete wall anchor (NOT INCLUDED)
M8
M6
M4
1-1 Select TV Screws
6
STEP 1 Attach Brackets to TV
7
1-2 Figure out the suitable position of brackets
INSTALL UP/DOWN IF NEEDED TV BRACKETS MUST BE LEVEL
!
!
02
LOW MOUNTING HOLES HIGH MOUNTING HOLES
8
Yes, choose suitable screws, washers and spacers.
1-4 Attach the TV Plate
No!
No, choose suitable screws and washers.
1-3 Need Spacer?
02
02
D2 F
B2 C
D1
B1
B1
E1
E2
B2 C
Centre line
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Maximum horizontal space between fasteners: 16 in. (406.4 mm)
● Stud center must be verified
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail,
or an edge to edge stud finder.
2. Position the Wall plate at your desired height and line up the holes with your stud center line.
Level the Wall plate and mark the hole locations.
Again, find another wood stud
16"
Wall
Wall
9
STEP 2A Attach Wall Plate to Wall Wood Stud Option
!
01
01
01
1 2
B3
3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center
of the studs.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 13.
1/8"
(3 mm)
No!
Wall
10
2.5"(64mm)
!
!
Wall
01
A1 A2
34
4. Install wall plate using lag bolts and washers . Tighten the lag bolts only until they are
pulled firmly against the wall plate.
A1
01 A2
B3
This manual suits for next models
1
Table of contents
Other USX-MOUNT TV Mount manuals
USX-MOUNT
USX-MOUNT XML020-24K-15 User manual
USX-MOUNT
USX-MOUNT XML019-1 User manual
USX-MOUNT
USX-MOUNT XML006-K1 User manual
USX-MOUNT
USX-MOUNT SMM015-01 User manual
USX-MOUNT
USX-MOUNT XMM006-2-15 User manual
USX-MOUNT
USX-MOUNT XAS306-1 User manual
USX-MOUNT
USX-MOUNT XAS004-1 User manual
USX-MOUNT
USX-MOUNT XMM010-1 User manual
USX-MOUNT
USX-MOUNT XMM021-03 User manual
USX-MOUNT
USX-MOUNT SMS005-01 User manual
USX-MOUNT
USX-MOUNT SML016-24K-01 User manual
USX-MOUNT
USX-MOUNT XML020-24K User manual
USX-MOUNT
USX-MOUNT XFL006-1 User manual
USX-MOUNT
USX-MOUNT SML025-01 User manual
USX-MOUNT
USX-MOUNT XMS008-09 User manual
USX-MOUNT
USX-MOUNT XTL006-1 User manual
USX-MOUNT
USX-MOUNT XMS010-L-09 User manual
USX-MOUNT
USX-MOUNT SML015-1 User manual
USX-MOUNT
USX-MOUNT SML015-01 User manual
USX-MOUNT
USX-MOUNT XMM017-01 User manual
