US Robotics 000698-13 - Owner's manual

Part No.1.024.1362-00

Published March1998

3COM

-MODEM

RELEASE NOTES

New Features

The following new features have been added to your

modem:

■V.90 Server Capabilities

■Selective Reject

■Disabling reset to view previous call data

■Fast Answer

■Turning off echo canceller (2100hztone)

■Microsoft Encrypted Password Authentication

■IDSL

Year 2000 Compliance

For information on Year 2000 compliance and 3Com

products, visit the 3Com Year 2000 web page:

http://www.3com.com/products/yr2000.html

New AT Commands

The following table includes a list of all AT commands

needed to use these new features. See the Command

Reference on the Connections CD-Rom for more

information regarding bit-mapped registers.

In order to Command

Enable V.90 (Default) ATS58.5=0

Disable V.90 ATS58.5=1

Disable 2100hz tone in DOV ATS69.6=1

Disable the asterick (*) key on the SLIC as a redial ATS68.5=1

23COMI-MODEMRELEASE NOTES

V.90 The

-modem now has V.90 server capabilities. By default,

V.90 is enabled on your modem.

V.90 analog clients can call into your

-modem to get V.90

connections. The analog device port is not able to act as a

V.90 server

Selective Reject

The

-modem now supports Selective Reject for analog

calls. Selective Reject improves performance on noisy lines

by reducing the amount of overhead incurred when the

protocol must resend data due to errors.

When Selective Reject is active, only the frame that

contained the error is resent, instead of the frame plus all

of the following unacknowledged frames.

Selective Reject is an optional part of the ITU-T V.42 (LAPM)

standard. By default, Selective Reject is enabled.

Disabling reset to view previous call data

If the communication software you use with your

-modem

cannot be configured to stop sending the ATZ string before

or after each connection, set your

-modem to ignore ATZ.

When the

-modem ignores ATZ, it does not clear out the

previous call statistics in the ATI6 screen.

By default, this feature is disabled.

Enable the asterick (*) key on the SLIC as a redial ATS68.5=0

Disable Selective Reject ATS51.6=1

Enable Data Over Voice ATS69.5=1

Enable Fast Answer ATS69.7=1

Ignore ATZ ATS69.2=1

In order to Command

New AT Commands 3

Fast Answer

Fast Answer saves time by forcing the

-modem to answer

calls as fast as possible without going through the Ring

Indicate toggling sequence.

By default, Fast Answer is disabled on your modem.

Turning off the echo canceller (2100hz tone)

You can now configure the

-modem so it does not send a

2100hz tone at the beginning of a call.

When Data Over Voice (DOV) is enabled, the

-modem

sends a 2100hz tone at the beginning of a 3.1khz 56 kbps

voice call to turn off the telephone company’s echo

canceller.

If there are no echo cancellers on the B-channel during the

call, disable the 2100hz tone in DOV to save 2 seconds of

connect time.

When you disable the tone, you also risk not being able to

connect to the phone number.

By default, this feature is enabled; the

-modem sends a

2100hz tone at the beginning of a DOV call.

Microsoft Encrypted Password

If the

-modem is connecting to a server that supports

Microsoft Encrypted Password Authentication, the

-modem will respond to the server using the same

protocol. However, the

-modem will communicate with

your computer using Password Authentication Protocol

(PAP).

Since your computer must communicate using PAP, the

software on your computer should not be configured to

ONLY accept Microsoft Encrypted Password.

Your modem will translate PAP into Microsoft Encryption

Password Authentication to communicate with the server.

The password will be clear-text over the serial cable

between your computer and the modem. Once the

password is on the ISDN telephone network, the password

will be encrypted.

43COMI-MODEMRELEASE NOTES

IDSL Your modem now supports 128Kbps synchronous mode.

When your modem is in this mode, it supports USWest

128K IDSL service.

IDSL mode is a leased line configuration, there is no call

setup required or supported. When the modem is turned

on and in IDSL Mode, it will attain physical layer

synchronization with the network. Data passes over both

B-Channels, to a single 128Kbps data stream. The data

stream is sent in a synchronous data format across the DTE

interface.

Once you have configured your modem for IDSL Mode, the

modem will read settings from NVRAM upon powerup.

To configure your modem for IDSL mode, enter the

following commands:

AT&F1*V2=4

ATS67=6S44=3M0&C1&D2&L1&M1&W

Your modem will respond with an "OK" message after you

enter each command.

New Connect Messages 5

New Connect Messages

The table below includes all new connect messages..

Message #Message #

28000 256 40000/ARQ/V90 287

28000/ARQ 257 33333/V90 288

28000/V90 258 33333/ARQ/V90 289

28000/ARQ/V90 259 37333/V90 290

29333 260 37333/ARQ/V90 291

29333/ARQ 261 41333/V90 292

29333/V90 262 41333/ARQ/V90 293

29333/ARQ/V90 263 42666/V90 294

30666 264 42666/ARQ/V90 295

30666/ARQ 265 44000/V90 296

30666/V90 266 44000/ARQ/V90 297

30666/ARQ/V90 267 45333/V90 298

32000 268 45333/ARQ/V90 299

32000/ARQ 269 46666/V90 300

32000/V90 270 46666/ARQ/V90 301

32000/ARQ/V90 271 48000/V90 302

34666 272 48000/ARQ/V90 303

34666/ARQ 273 49333/V90 304

34666/V90 274 49333/ARQ/V90 305

34666/ARQ/V90 275 50666/V90 306

36000 276 50666/ARQ/V90 307

36000/ARQ 277 52000/V90 308

36000/V90 278 52000/ARQ/V90 309

36000/ARQ/V90 279 53333/V90 310

38666 280 53333/ARQ/V90 311

38666/ARQ 281 54666/V90 312

38666/V90 282 54666/ARQ/V90 313

38666/ARQ/V90 283 56000/V90 314

40000 284 56000/ARQ/V90 315

40000/ARQ 285 57333/V90 316

40000/V90 286 57333/ARQ/V90 317

63COMI-MODEMRELEASE NOTES

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or

may not be registered in other countries.

3Com, BoundaryRouting, LANplex, LinkBuilder, NETBuilder, NETBuilderII, ParallelTasking, EtherDisk,

EtherLink, EtherLinkII, NetAge, SmartAgent, SuperStack, TokenDisk, TokenLink, Transcend, and

ViewBuilder are registered trademarks of 3Com Corporation. FDDILink, FMS, and NetProbe are

trademarks of 3Com Corporation. 3ComFacts is a service mark of 3Com Corporation.

Other brand and product names may be registered trademarks or trademarks of their respective

holders.

Other manuals for 000698-13 -

This manual suits for next models

Table of contents

Other US Robotics Modem manuals

US Robotics

US Robotics USR8500 User manual

US Robotics

US Robotics USR5610B User manual

US Robotics

US Robotics 56K MESSAGE MODEM - QUICK FOR WINDOWS User manual

US Robotics

US Robotics SPORTSTER FLASH X2 Configuration guide

US Robotics

US Robotics 56K SERIAL CONTROLLER FAXMODEM User manual

US Robotics

US Robotics USR802972B-OEM User manual

US Robotics

US Robotics 005690-00 User manual

US Robotics

US Robotics Courier V.Everything User manual

US Robotics

US Robotics COURIER User manual

US Robotics

US Robotics COURIER HST User manual

US Robotics

US Robotics 3CP5610 User manual

US Robotics

US Robotics 3CP5699A User manual

US Robotics

US Robotics 56K SERIAL CONTROLLER FAXMODEM User manual

US Robotics

US Robotics 5630b User manual

US Robotics

US Robotics Courier V.Everything 3CP3453 User manual

US Robotics

US Robotics SureConnect 9001 User manual

US Robotics

US Robotics USR5695 User manual

US Robotics

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Installation manual

US Robotics

US Robotics 002605-00 - User manual

US Robotics

US Robotics USR9001 User manual

US Robotics

US Robotics 002605-00 - User manual

US Robotics

US Robotics USR5699B User manual

US Robotics

US Robotics 005690-00 - User manual

US Robotics

US Robotics Courier USR3510 User manual

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual

Zoom

Zoom 1070 Series quick start