US Robotics 56K SERIAL CONTROLLER FAXMODEM User manual
For Windows 3.x installation instructions, refer to the
electronic manual on the ConnectionsTM CD-ROM.
BfBf
BfBf
Bf YY
YY
YBiBi
BiBi
Bi
1PrPr
PrPr
Pree
ee
e
Write the m
The serial
sticker on
modem’s b
Shut down
2ConCon
ConCon
Con
Connect o
included)
computer
NOTNOT
NOTNOT
NOT
back
232, 1
or PAR
READ
ME
FIRST! 6K Faxmodem6K Faxmodem
6K Faxmodem6K Faxmodem
6K Faxmodem
Installation Guide
For Windows 95
55
55
5
part number 1.024.1503-00
PrPr
PrPr
Preparepar
eparepar
epare for inste for inst
e for inste for inst
e for installation.allation.
allation.allation.
allation.
Write the modem’s serial number in the box below.
The serial number is located on the white bar code
sticker on the underside of the modem and on the
modem’s box.
Shut down Windows and turn off your computer.
ConneConne
ConneConne
Connect the modem to thect the modem to the
ct the modem to thect the modem to the
ct the modem to the
computer.computer.
computer.computer.
computer.
Connect one end of the RS-232 serial cable (not
included) to the modem and the other to your
computer’s serial port.
NOTE:NOTE:
NOTE:NOTE:
NOTE: When looking for the serial port label on the
back of your computer, look for COM, MODEM, RS-
232, 10101, or SERIAL. Do not use AUX, GAME, LPT,
or PARALLEL.
4Plug in the modem’s powPlug in the modem’s powe
Plug in the modem’s powPlug in the modem’s powe
Plug in the modem’s pow
supply.supply.
supply.supply.
supply.
Plug the power supply into the modem’s pow
(labeled on the modem’s underside) an
an electrical outlet. Turn on the modem. T
light should illuminate.
5Turn on your computer. When your desktop re
insert the
Connections
CD into your CD-ROM
If you see a “New Hardware Found” screenIf you see a “New Hardware Found” screen
If you see a “New Hardware Found” screenIf you see a “New Hardware Found” screen
If you see a “New Hardware Found” screen
have Windows 95 Version A:have Windows 95 Version A:
have Windows 95 Version A:have Windows 95 Version A:
have Windows 95 Version A: Choose
InstInst
InstInst
Install the modem driverall the modem driver
all the modem driverall the modem driver
all the modem driver
COM
NOTE:NOTE:
NOTE:NOTE:
NOTE:If the CS light does not illuminate or other lig
illuminate, make sure that only DIP switches 3, 5, an
are in the down position. (The DIP switches are loca
next to the phone jacks on the back of the modem.) Y
may also be using the wrong serial cable or the wro
power supply. See the "BeforeYou Begin" section at
beginning of this Installation Guide for more informat
’s power’s power
’s power’s power
’s power
dem’s power jack
derside) and into
modem. The CS
rdesktop returns,
ur CD-ROM drive.
nd” screen, yound” screen, you
nd” screen, yound” screen, you
nd” screen, you
hoose
drivers.drivers.
drivers.drivers.
drivers.
6
Your Modem Description Here
When your desktop returns, verify that your modem
is properly installed. Click , point to
, and click . Double-click the
ModemsModems
ModemsModems
Modems icon. When the “Modems Properties” screen
appears, you should see a description of your modem.
Click on the description of your modem and then click
the tab. Write down the COM port to
which your modem is assigned (for example,
) in the box below. Click . The
modem’s command set should appear in the box.
Click then click .
Verify that the modem isVerify that the modem is
Verify that the modem isVerify that the modem is
Verify that the modem is
prpr
prpr
properloperl
operloperl
operly insty inst
y insty inst
y installed.alled.
alled.alled.
alled.
COM Port:
Your Modem Description Here
nate or other lights
witches 3, 5, and 8
itches are located
fthe modem.) You
able or the wrong
egin" section at the
more information.
BeforBefor
BeforBefor
Before Ye Y
e Ye Y
e You Beginou Begin
ou Beginou Begin
ou Begin
To install the modem, you need an RS-232 serial cable. This is
also known as a “modem cable” or a “PC to modem” cable. This
cable is not included. Do not use a null modem cable or a printerDo not use a null modem cable or a printer
Do not use a null modem cable or a printerDo not use a null modem cable or a printer
Do not use a null modem cable or a printer
cable.cable.
cable.cable.
cable. Look at the COM port on the back of your computer to
determine the type of cable you need.
You need a
DB9/DB25M
RS-232 serial cable
You need a
DB25/DB25M
RS-232 serial cable
Use the right cable.Use the right cable.
Use the right cable.Use the right cable.
Use the right cable.
While other power adapters may fit into your modem’s power jack,
they may damage the modem or cause it to operate irratically.
Use the power supply that came with your modem.Use the power supply that came with your modem.
Use the power supply that came with your modem.Use the power supply that came with your modem.
Use the power supply that came with your modem.
Look at the labels.Look at the labels.
Look at the labels.Look at the labels.
Look at the labels.
Note these icons on the modem’s underside:
3ConCon
ConCon
Con
Plug one e
TELCO jac
modem’s
an analog
WARWAR
WARWAR
WAR
phone
digita
unsur
When you
telephone
telephone’
part number 1.024.1503-00
ConneConne
ConneConne
Connect the modem to anct the modem to an
ct the modem to anct the modem to an
ct the modem to an
analog phone line.analog phone line.
analog phone line.analog phone line.
analog phone line.
Plug one end of the included phone cord into the
TELCO jack on the modem (labeled on the
modem’s underside) and plug the other end into
an analog phone jack.
WARNING:WARNING:
WARNING:WARNING:
WARNING: Many offices and some homes have digital
phone lines. The modem will be damaged if you use a
digital phone line. Call your phone company if you are
unsure which type of line you have.
When you are not using the modem, you can use a
telephone on the modem’s phone line. Plug the
telephone’s cord into the modem’s PHONE jack.
yp y p
insert the
Connections
CD into your CD-ROM
If you see a “New Hardware Found” screenIf you see a “New Hardware Found” screen
If you see a “New Hardware Found” screenIf you see a “New Hardware Found” screen
If you see a “New Hardware Found” screen
have Windows 95 Version A:have Windows 95 Version A:
have Windows 95 Version A:have Windows 95 Version A:
have Windows 95 Version A: Choose
then click .
If you see an “Update Device Driver WIf you see an “Update Device Driver W
If you see an “Update Device Driver WIf you see an “Update Device Driver W
If you see an “Update Device Driver W
screen, you have Windows 95 Version B:screen, you have Windows 95 Version B:
screen, you have Windows 95 Version B:screen, you have Windows 95 Version B:
screen, you have Windows 95 Version B:
.
Version B
Version A
WW
WW
Windoindo
indoindo
indows 95ws 95
ws 95ws 95
ws 95 VV
VV
Version A:ersion A:
ersion A:ersion A:
ersion A: Type D:\D:\
D:\D:\
D:\ in the bo
then click . If your CD-ROM drive u
different letter, type that letter in place of “D”
Windows 95 Version B:Windows 95 Version B:
Windows 95 Version B:Windows 95 Version B:
Windows 95 Version B: Click .
Version A
Version B
NOTE:NOTE:
NOTE:NOTE:
NOTE:If neither screen appears, refer to the “Plug an
Play Does Not Detect Your Modem” section of the User
Guide and Reference included in this package.
Your Modem Descripti
For troubleshooting help or to find out how to contact technical
support, see the “Troubleshooting and Online Help Resources”
chapter in the User’s Guide Reference.
3Com and U. S. Robotics are registered trademarks; x2 and
Connections
are trademarks of 3Com Corporation or its
subsidiaries. Windows is a registered trademark of Microsoft Corp. All other trademarks are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective companies. Copyright ©1998
3Com Corporation or its subsidiaries. All rights reserved.
Click and then click . Type
D:\setup.exeD:\setup.exe
D:\setup.exeD:\setup.exe
D:\setup.exe and then click . If your
CD-ROM drive uses a different letter, type that letter
in place of “D”.
The Setup Wizard on the CD guides you through
installing the
Connections
program group and
registering your modem.
For instructions on how to install software from the
CD, see the “Software Installation” chapter in the
User’s Guide Reference
.
7InstInst
InstInst
Install theall the
all theall the
all the
ConneConne
ConneConne
Connectionsctions
ctionsctions
ctions
CD andCD and
CD andCD and
CD and
register your modem.register your modem.
register your modem.register your modem.
register your modem.
*IMPORTANT! In accordance with the ITU-T standard for 56K transmissions, this modem is capable of 56 Kbps downloads.
However, due to FCC rules which restrict power output of the service providers’ modems, current download speeds are limited
to 53 Kbps. Actual speeds may vary depending on line conditions and other factors. Uploads from users to server equipment
travel at speeds up to 31.2 Kbps. An analog phone line compatible with the ITU-T 56K standard or x2 technology, and an Internet
provider or corporate host site compatible with the ITU-T 56K standard or x2 technology are necessary for these high-speed
downloads.
p,
ur CD-ROM drive.
nd” screen, yound” screen, you
nd” screen, yound” screen, you
nd” screen, you
hoose
and
Driver Wizard”Driver Wizard”
Driver Wizard”Driver Wizard”
Driver Wizard”
Version B:Version B:
Version B:Version B:
Version B: Click
Version A
:\\
:\\
\ in the box and
ROM drive uses a
lace of “D”.
.
sion A
rto the “Plug and
tion of the User’s
ackage.
Modem Description Here
Other manuals for 56K SERIAL CONTROLLER FAXMODEM
7
This manual suits for next models
1
Other US Robotics Modem manuals
US Robotics
US Robotics 002605-00 - User manual
US Robotics
US Robotics 3CP5610A User manual
US Robotics
US Robotics USR5660A User manual
US Robotics
US Robotics 56K USB MODEM - QUICK REV 2.0 User manual
US Robotics
US Robotics USR5670 User manual
US Robotics
US Robotics 005689-03 User manual
US Robotics
US Robotics Courier V.Everything x2 Addendum User manual
US Robotics
US Robotics 3CP5613 User manual
US Robotics
US Robotics USR5635 User manual
US Robotics
US Robotics Courier V.34 User manual
US Robotics
US Robotics 56K SERIAL CONTROLLER FAXMODEM User manual
US Robotics
US Robotics SPORTSTER FLASH X2 User manual
US Robotics
US Robotics 000698-13 - Owner's manual
US Robotics
US Robotics 2884C Reference guide
US Robotics
US Robotics USR5600 User manual
US Robotics
US Robotics 005690-00 User manual
US Robotics
US Robotics 3CP5699A User manual
US Robotics
US Robotics ADSL Ethernet Modem Installation guide
US Robotics
US Robotics USR802972B-OEM User manual
US Robotics
US Robotics 56K MESSAGE MODEM - QUICK FOR WINDOWS User manual
