Time and alarm clock setting
1.Time setting
1.Long press CLOCK after turn on the speaker.
⑴Long press CLOCK to time setting, now it’s hour setting with flash, the flash time is five seconds.
⑵Press previous or next button to change the hour, the flash time is five seconds.
⑶When hour is done, short press CLOCK to go to minute setting. Now the screen is flashing, the flash time
is five seconds.
⑷Press previous or next button to change the minute, the flash time is five seconds.
⑸When minute is done, short press CLOCK to go to the day of week setting. Press previous or next button
to change the day of the week. It shows d1 ,d2, d3,d4,d5,d6,d7. Now the screen is flashing, the flash time is
five seconds.
⑹When the day of the week is done, short press clock to confirm the setting.
Note that it won’t work if you didn’t finish setting till to confirm it.
2.Short press CLOCK
⑴Under time mode, short press CLOCK to check the day of the week, than it will go back to time mode
automatically after five seconds .
⑵When showing the day of the week, short press CLOCK to go back to the time.
2. Alarm clock setting (0, 1 or 2 time a day can be set)
⑴Long press M to set alarm clock 1,now change the hour. Meanwhile the screen flashes, the flash time is
five seconds.
⑵Press previous or next button to change the hour. Now the screen flashes, the flash time is five seconds.
⑶When hour is done, short press M to go to minute setting. Now the screen flashes, the flash time is five
seconds.
⑷Press previous or next button to change the minute. Now the screen flashes, the flash time is five
seconds.
⑸When minute is done, short press M to go to alarm clock setting of week. If need alarm clock every day,
please choose 1-7,if only workdays, then 1-5; if only double holidays, then 6-7. Meanwhile the screen
flashes.
⑹Press previous or next button to change the day of the week. Now the screen flashes, the flash time is five
seconds.
⑺Short press M to choose to ring tones setting: BB (ringing), BT, FM, USB, SD. Besides, there is a special
mode OFF that can’t ring. (If you don’t want to use the alarm clock after setting, please choose OFF mode ,it
won’t ring).
⑻Press previous or next button to change the mode of ring tones. Now the screen flashes, the flash time is
five seconds.
⑼Short press M to confirm the setting.
⑽It will go to alarm clock 2 setting after finished alarm clock 1,the setting method is same as alarm clock 1.
If you didn’t finish the setting and press M ,it will be unworkable alarm clock setting.
3.Ringing alarm setting
It will ring when clock and alarm clock time is same, meanwhile the background light will be on, the volume
will increase gradually, it will be the loudest sound after one minute, it will ring continuously for one hour if no
stop.
Press any button to stop the ringing.
LED Alarm clock 1
LED Alarm clock 2
