Uniden App Cam Spotlight+ User manual
App Cam Spotlight+
Quick Start Guide
What’s in the Box
Screw Kit
x2
App Cam Solo+
x1
Reset Needle
x1
Camera
Mounting Template
x2
Power Adaptor
x1
Camera Bracket
x1
1
General Introduction
2
Spotlight
Lens
Daylight Sensor
Status LED
Built-in Mic
Reset Button
PIR Motion Sensor
Micro SD Card Slot
Power cable
Speaker
Press for more than five seconds to restore default settings
Blinking : Wi-Fi connection failed
On: Camera is starting up/Wi-Fi connection
succeeded
Install Uniden Solo App
Set up the Camera
There are two ways to get the Uniden Solo App:
• Search “Uniden Solo” in App Store (for iOS),
download and install the app.
• Search “Uniden Solo” in Google Play (for Android),
download and install the app.
Please follow the prompt tone to
congure the camera
Please run app, add the
camera and set it up.
1. Please click the “ ” button in the
top right corner to add the camera.
3
2. Scan the QR code on the
bottom of the camera.
3. Click “Connect to Wi-Fi” to
continue.
Note:
When the setup for the
camera is completed, your
family can access the
camera simply by clicking
“Access Cameras” without
reconguring it.
App Cam Spotlight+
Camera can only connect
to 2.4GHz Wi-Fi.
4
4. Click the button “I heard the voice” to
enter the next page.
If you did not hear the voice prompt, please
press “I did’t hear the voice” for help.
5. Enter the Wi-Fi password of the selected
Wi-Fi network and tap “Next” to continue.
5
6. A QR code will be generated on the phone. Please place the QR code on your phone towards
App Cam Solo+ camera’ lens at a distance of about 20cm to let the camera scan the QR code.
Please make sure that you’ve ripped the protection lm of the camera’s lens.
Note: To help scanning, please tap the QR code to display in full screen
Scan succeeds. Camera is connecting to the router. Please wait.
About 20cm
6
7. If you hear the above voice prompt, please
press “I heard ‘Wi-Fi connection failed’ ”
for help.
Connection to the router failed!
8. If you hear the above voice prompt, please
press “I heard ‘Connection to the router
succeeded.’ ” to nish the quick setup.
Connection to the router succeeded.
7
9. Create a password (at least 6 characters) and name the camera. Then start live view or go to “De-
vice Settings” for more congurations.
Note:
“Name your camera” eld refers to the display name of the camera rather than the login username.
8
9
Device Menu
Menu
Add New Device
Device Settings
Access Live View
Table of contents
Other Uniden Security Camera manuals
Uniden
Uniden UDR444 User manual
Uniden
Uniden AppCam 4OPT User manual
Uniden
Uniden APPCAM23A User manual
Uniden
Uniden AppCam Solo 2 User manual
Uniden
Uniden APPCAM23 User manual
Uniden
Uniden APPCAM25HD User manual
Uniden
Uniden App Cam Solo PT User manual
Uniden
Uniden BW31PTZ User manual
Uniden
Uniden UDR744 User manual
Uniden
Uniden UDR444 User manual
Uniden
Uniden APPCAM23 Service manual
Uniden
Uniden G101 User manual
Uniden
Uniden LightCam 40HD User manual
Uniden
Uniden AppCam 25HD User manual
Uniden
Uniden UDR444 User manual
Uniden
Uniden SOLO+ User manual
Uniden
Uniden Guardian GC45 Service manual
Uniden
Uniden App Cam Spotlight User manual
Uniden
Uniden AppCam 50HD User manual
Uniden
Uniden UDRC58HD User manual
