Ubiquiti Uni-fi AP User manual

Enterprise WiFi System

Models:

UAP/UAP-LR (Long Range)

Introduction

Thank you for purchasing the Ubiquiti Networks™UniFi™Enterprise

WiFi System. The UniFi Enterprise WiFi System includes the UniFi

Controller software that allows you to manage your wireless

network using your web browser.

This Quick Start Guide is for use with the following UniFi Enterprise

WiFi System Access Point models. Unless otherwise needed to

specify differences between the two models, this Quick Start

Guide will refer to both as UniFi AP.

Model Maximum Power

Consumption

Maximum TX

Power

UniFi AP

(UAP) 4 W 20 dBm

UniFi AP Long Range

(UAP-LR) 6 W 27 dBm

The UniFi Enterprise WiFi System also includes the necessary

hardware for mounting the unit on a wall or a ceiling. The UniFi

Enterprise WiFi System supports Passive PoE, which works with the

included PoE adapter.

If you want to power the UniFi AP from an 802.3af compliant

switch, Ubiquiti Networks offers the optional Instant 802.3af

Adapter to instantly transform any PoE device into a fully 48V,

802.3af compliant product. Product details are available on our

website at http://ubnt.com/8023af

UniFi™AP/AP-LR Quick Start Guide

Package Contents

UniFi AP Wall-Mount Bracket Ceiling-Mount Plate

M3x50 Flat Head

Screws

(Qty. 3)

M3 Keps Nuts

with Tooth Washer

(Qty. 3)

M2.9x20 Self

Tapping Screws

(Qty. 3)

M3x20 Screw

Anchors

(Qty. 3)

Enterprise WiFi System

Models:

UAP/UAP-LR (Long Range)

PoE Adapter

(24V, 0.5A)

Power Cord UniFi Controller

CD with User Guide

Quick Start

Guide

System Requirements

• Microsoft Windows XP, Windows Vista, Windows 7, Windows 8,

or Mac OS X

• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft

Internet Explorer 8 (or above)

Network Topology Requirements

• A DHCP-enabled network (for the AP to obtain an IP address as

well as for the wireless clients after deployment)

• A management station computer running the UniFi Controller

software, located either onsite and connected to the same

Layer-2 network, or off-site in a cloud or NOC

Router

O-Site

Cloud/NOC2

On-Site

Management Station

Wired UAP/UAP-LR

Wireless

Uplinked1

UAP/UAP-LR

Sample Network Diagram

1. Please refer to the UniFi Enterprise WiFi System User Guide | UAP/UAP-LR on the

CD for setting up wireless-linked APs.

2. All UniFi APs support off-site management controllers. See the User Guide for

setup details.

UniFi™AP/AP-LR Quick Start Guide

Hardware Installation

The UniFi AP is powered by the included PoE (Power over Ethernet)

adapter. To install the UniFi AP, perform the following steps:

1. Connect an Ethernet cable to the Ethernet port on the

UniFi AP.

2. Connect the other end of the Ethernet cable to the Ethernet

port labeled PoE on the PoE Adapter.

Note: If you plan to mount the UniFi AP on your ceiling,

perform the ceiling mount installation steps before

connecting the Ethernet cable to the PoE Adapter.

Hardware Installation

3. Connect an Ethernet cable from your LAN to the Ethernet port

labeled LAN on the PoE Adapter.

4. Connect the power cord to the power port on the PoE Adapter.

Connect the other end to of the power cord to a power outlet.

UniFi™AP/AP-LR Quick Start Guide

Mounting the Access Point

The UniFi AP can be wall-mounted or mounted on a ceiling.

Perform the following steps for the appropriate installation:

Wall-Mount

1. Align the Wall-Mount Bracket with the Wall Mount text facing

up. There are horizontal and vertical lines on the bracket to

help with orientation.

2. Use a pencil to mark the holes on the wall.

3. Use a 6 mm drill bit to drill the holes in the wall.

4. Insert the 3 M3x20 Screw Anchors into the wall.

5. Secure the Wall-Mount Bracket to the wall by inserting the

M2.9x20 Self Tapping Screws into the anchors.

Hardware Installation

6. Align the notches on the UniFi AP with the notches on the

Wall-Mount Bracket.

7. Turn the UniFi AP clockwise until it locks into place.

UniFi™AP/AP-LR Quick Start Guide

Ceiling-Mount

1. Remove the ceiling tile.

2. Align the Ceiling-Mount Plate to the center of the top side of

the ceiling tile.

3. Use a 3.5 mm drill bit to drill holes for the three flat head

screws.

4. Cut or drill a circle approximately 25 mm in size that lines up

with the larger circle on the Ceiling-Mount Plate. This will be

used for the Ethernet cabling.

5. Secure the Wall-Mount Bracket and Ceiling-Mount Plate to the

ceiling tile using the 3 M3x50 Flat Head Screws and 3 M3 Keps

Nuts with Tooth Washers.

Other manuals for Uni-fi AP

This manual suits for next models

Table of contents

Other Ubiquiti Wireless Access Point manuals

Ubiquiti

Ubiquiti ER-8-XG User manual

Ubiquiti

Ubiquiti Rocket 5AC-Lite User manual

Ubiquiti

Ubiquiti airGateway-LR User manual

Ubiquiti

Ubiquiti NanoStationM Series User manual

Ubiquiti

Ubiquiti NanoBeam ac User manual

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-LR User manual

Ubiquiti

Ubiquiti Rocket R5ACL User manual

Ubiquiti

Ubiquiti PBE-M5-400 User manual

Ubiquiti

Ubiquiti LTU-Pro User manual

Ubiquiti

Ubiquiti Rocket M3 User manual

Ubiquiti

Ubiquiti UAP User manual

Ubiquiti

Ubiquiti AirOS B2 User manual

Ubiquiti

Ubiquiti NanoStation NSM2 User manual

Ubiquiti

Ubiquiti AirCube ACB-AC User manual

Ubiquiti

Ubiquiti BulletAC-IP67 User manual

Ubiquiti

Ubiquiti UniFi AP AC EDU User manual

Ubiquiti

Ubiquiti NanoBeam 5AC Gen2 User manual

Ubiquiti

Ubiquiti UniFi User manual

Ubiquiti

Ubiquiti UNIFI UAP-AC-IW-PRO User manual

Ubiquiti

Ubiquiti NanoBeam 5AC Gen 2 NBE-5AC-Gen2 User manual

Ubiquiti

Ubiquiti AG-PRO-INS User manual

Ubiquiti

Ubiquiti UniFI UAP-AC User manual

Ubiquiti

Ubiquiti UniFi AC AP Mesh Pro User manual

Ubiquiti

Ubiquiti NanoBeam NBE2ACN User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide

EnGenius

EnGenius EAP350 user guide