Turtle Beach Ear Force PBT User manual

User’s Guide

PS3™ Bluetooth®Communicator

System Requirements

Package Contents

PlayStation®3 game console

Ear Force®PBT

Bluetooth communicator

Removable

ear clip

Removable

clothing clip

USB cable

To avoid potential damage to the device, always disconnect all cables before transporting it.

WARNING: Permanent hearing damage can occur if a headset is used at high volumes for

extended periods of time, so it is important to keep the volume at a safe level. Over time, your

ears adapt to loud volume levels, so a level that may not cause initial discomfort can still damage

your hearing. If you experience ringing in your ears after listening with the headset, it means the

volume is set too loud. The louder the volume is set, the less time it takes to affect your hearing.

So, please take care to listen at moderate levels.

• Before placing a headset on your ears, turn the volume down completely, then slowly increase

it to a comfortable level.

• Turn down the volume if you can’t hear people speaking near you.

• Avoid turning up the volume to block out noisy surroundings.

The Turtle Beach Ear Force PBT is a Bluetooth®communicator device for the PlayStation 3. It allows

wireless connectivity to the PS3™ for live chat with others over the PlayStation Network. The PBT is

unique because unlike other Bluetooth communicators, in addition to pairing with your PS3, it can

simultaneously pair with your mobile phone too. The PBT’s dual-pairing feature maximizes

convenience when gaming because you can instantly switch from in-game chatting to take a phone

call—with just a single press of a button. With the PBT’s 2.5mm mic jack you can even use the

wireless Ear Force X31 or X41 headsets on the PlayStation 3. All the innovative features that make

Turtle Beach’s X31 and X41 excellent XBOX 360 headsets can now be enjoyed on the PS3 .

IMPORTANT

Before using your PBT for the rst time, you must fully charge its internal battery and pair it with your

PS3 as described later in this User’s Guide.

Safety Notice

Ear Force PBT Overview

Features

Features (cont’d)

PBT’s Multi-Function Button (“MFB”): One-button convenience for power on and off, call

answering and hang up (when PBT is used in conjunction with a mobile phone) and to put

the PBT into “search” mode while registering with another Bluetooth device.

Indicator LED: Dual color LED to indicate current state of device as described in this User’s

Guide.

2.5mm Mic Jack: Connects the microphone from a Turtle Beach Ear Force X31 or X41 wire-

less gaming headset (or any other stereo or mono headset) to the PBT. This enables PlaySta-

tion Network chat on the X31 and X41.

Volume Controls: Press the “+” or “-“ to raise/lower the level of incoming chat while on

PlayStation Network or during phone calls.

Microphone: Directional microphone picks up the user’s voice for communicating over the

PlayStation Network or a phone conversation.

USB Port: The included USB cable is used to charge the internal battery and/or pair the PBT

manually with a PS3.

Ear Clip: Use the PBT as a standard Bluetooth communicator earpiece for a mobile phone.

The removable clip comfortably hooks over your ear.

Clothing Clip: When using the PBT with an X31 or X41, this clip can be conveniently attached

to a pocket, piece of clothing, etc.

Battery Charging

Turning The Power ON and OFF

The PBT includes an internal rechargeable lithium ion battery. It is not fully charged when new.

Please allow four (4) hours to fully charge the battery prior to rst use. Subsequent charges should

take about one (1) hour. With the battery fully charged, talk time can be up to 6 hours, and the

stand-by time can be up to 100 hours. Note that the PBT can be used during charging.

1) Plug the USB cable into an available USB port on your PS3 or PC.

2) Connect the cable to the mini USB port on the PBT. The LED indicator glows red while the PBT is charging.

3) When battery charging is complete, the red LED indicator will turn off.

NOTE: When the battery is low, the PBT will make continuous high/low tones every 10 seconds,

indicating that charging is needed. When the battery reaches a “critical” level, the LED indicator

will blink red rapidly and the PBT will enter its “Auto Power-down” mode. At this point, all key

presses will be ignored, the LED will turn off and no tones/beeps will be heard, The PBT must be

charged at this point.

After charging, activate the PBT by pressing the MFB for 3 seconds until the button glows blue—

then release the button. Or, if you are already wearing the PBT in your ear, press the MFB for 2

seconds until you hear the “power on” chime—then release the button. The blue LED blinks every

5 seconds while the PBT is powered on,.

To power off the PBT, press and hold the MFB for 4 seconds until the red light turns on—then

release the button. Or, if you are wearing the PBT, press the MFB for 4 seconds until you hear the

“power off” chime—then release the button. The PBT is now off.

“Pairing” is when two Bluetooth devices agree to communicate with each other and establish

a connection. This link between the PBT and PS3 enables you to control various functions of

the devices without the need for reconguring each time you use them together. If everything is

working properly you will only need to go through the pairing process once. The PS3 and PBT will

remain paired even when powered off, a connection is interrupted or stopped, or one or both are

restarted. This also applies to most mobile phones.

Wireless Pairing to the PlayStation 3:

Follow these steps to make a wireless connection between the PBT and PS3. Before you begin,

your PS3 must have the latest available software update in the System Settings menu.

1) With the PBT powered OFF, go to the PS3 Settings > Accessory Settings >

Manage Bluetooth Devices.

2) If you have never used a Bluetooth device or have deleted any proles from other devices

previously used with your console, the prompt will ask if you wish to register a device.

Choose “Yes” to start scanning. If any other Bluetooth devices have previously been paired

with your console they will appear in a list. Choose “Start Scanning” at the bottom of the

screen.

3) On the PBT, press and hold the MFB for 5 seconds until the ashing LED changes from

blue to red—then release the button. A tone will

also sound in the earpiece to indicate that the

PBT is in pairing mode.

4) When the PS3 is nished scanning, it will

prompt you to select the Bluetooth device.

Select “Turtle Beach PBT” from the list.

5) On the next screen, enter “0000” as the Pass

Key and select “OK”. A tone will be heard in the

earpiece and the PBT will now be paired with

your PS3.

Pairing the Bluetooth Communicator

Conrming a Successful Pairing (PS3)

Once the PBT has been paired with the PS3,

you’ll want to test its functionality.

1) Go to Settings > Accessory Settings > Audio

Device Settings.

2) Select “Turtle Beach PBT” as the Input and

Output Device and press X to conrm.

3) Click on “Microphone Level” and adjust the lev-

el of your chat output so that the bar graph barely

reaches the red area when you speak loudly.

4) Click “OK” to save.

Pairing with a Mobile Phone

Follow these steps to connect the PBT to a mobile phone for making and receiving calls.

The PBT must be powered off before you start.

1) On the PBT, press and hold the MFB for 5 seconds until the ashing LED changes from

blue to red—then release the button. A tone will also sound in the earpiece to indicate that

the PBT is in pairing mode.

2) On your mobile phone, activate the Bluetooth mode and search for Bluetooth devices as

described in its user manual.

3) When your phone is nished scanning, select “Turtle Beach PBT” from the list and follow

the prompts to connect.

4) Enter “0000” as the Pass Key and select “OK”. The PBT is now paired with your mobile phone.

Pairing the PBT Bluetooth Communicator (cont’d)

Once the PBT is successfully paired with your mobile phone, you can use it to make and receive

calls. The PBT can be used with voice dialing if your phone supports this function.

1) Using voice dialing – Press the MFB button for 3 seconds until you hear a tone—then release

the button. The voice recognition prompt in your phone will now be activated. Say the name of

the phone number or person whom you want to call. You can exit the voice recognition state at

any time by pressing the MFB for 3 seconds

2) Using mobile phone keys to make a call - Dial the number on the mobile phone as normal.

Once the call has been placed, the sound will automatically be transmitted to the PBT.

3) Redial - Double-click the MFB. You will hear two beeps, after which the last number dialed

will be called.

4) Switching from PBT to phone – While using the PBT for a phone call, you can switch to using

your handset by pressing the MFB for 3 seconds. Similarly, you can divert an active call from the

handset to the PBT by pressing the MFB for 3 seconds.

5) Muting the microphone – During a phone call, the PBT microphone can be muted by double-

clicking the MFB. You will hear two beeps, indicating that the mic mute is active. While the mic

is muted, a beep will be heard every 10 seconds to let you know that mic mute is still activated.

To turn off the mic mute, simply double-click the MFB again. You will hear two beeps, indicating

that the mic mute has been disabled.

NOTE: Some older mobile phones may not have a redial or voice recognition function. If a

phone does not have a redial function, then a double-click of the MFB will initiate the voice recognition

state instead. If a phone does not have either function, then a double-click or 3-second press of

the MFB will have no effect.

Making Calls

When the PBT is powered on and there is an incoming call you will hear a musical chime. You

have three options when an incoming call is received:

1) Answer call – Click the MFB once to accept the call. Click it again to end a call. A tone is

heard in the earpiece each time you answer or end a call.

2) Reject call – Press the MFB for 3 seconds until you hear a beep. The call is sent directly to

your voicemail.

3) Do nothing – The “incoming call chime” will sound until your phone sends the caller to voicemail.

Incoming Calls

Table of contents

Other Turtle Beach Headset manuals

Turtle Beach

Turtle Beach Ear Force XP300 User manual

Turtle Beach

Turtle Beach Ear Force XL1 User manual

Turtle Beach

Turtle Beach Elite Pro User manual

Turtle Beach

Turtle Beach Ear Force PX5 User manual

Turtle Beach

Turtle Beach Ear Force Charlie User manual

Turtle Beach

Turtle Beach EAR FORCE Stealth 500X User manual

Turtle Beach

Turtle Beach Stealth 700 Gen 2 User manual

Turtle Beach

Turtle Beach Disney Infinity 2.0 User manual

Turtle Beach

Turtle Beach Spectre User manual

Turtle Beach

Turtle Beach XP 510 User manual

Turtle Beach

Turtle Beach EarForce Sierra User manual

Turtle Beach

Turtle Beach XL 1 Amplified Stereo User manual

Turtle Beach

Turtle Beach Ear Force N11 User manual

Turtle Beach

Turtle Beach Ear Force X12 User manual

Turtle Beach

Turtle Beach Ear Force DPX21 User manual

Turtle Beach

Turtle Beach Ear Force P11 User manual

Turtle Beach

Turtle Beach XoFOUR User manual

Turtle Beach

Turtle Beach Ear Force Z11 User manual

Turtle Beach

Turtle Beach Ear Force X31 User manual

Turtle Beach

Turtle Beach Ear Force XP400 User manual

Turtle Beach

Turtle Beach EAR FORCE PX24 User manual

Turtle Beach

Turtle Beach Ear Force Bravo Parts list manual

Turtle Beach

Turtle Beach Elite 800 User manual

Turtle Beach

Turtle Beach Ear Force Z6A User manual

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Jabra

Jabra FR 20 user guide

Roxcore

Roxcore Flow A+ manual

Philips

Philips SHB6101 Specification sheet

Jabra

Jabra PRO 9460 Duo datasheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

Jabra

Jabra Steel quick start guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications